I had everyhtnig working well . Now when I try to run my external radio I get the Omni Rig fault. I using Omni 1.2 . I think it's configured correctly, My radio is set to Com 7 I have the correct radi

Greetings, Starting a new thread. Last week, Simon and others helped me with audio problems I was having with SDRC. Thank you all! Some problems have been cleared up, but I am having still having issu

It’s a USB encoder and works with Icom’s RSBA1 software. Unfortunately, it’s way overpriced - I the transmit bar which I have not seen on another encoder that’s reasonably priced. 73’s Don W KD4APP Ge

Under: Program Options > Recording> Data Recorder There is a selectable time interval for a "data cache", which adds cached data to the start of a recording. What is the purpose of this? Larry

Hi Simon, yesterday I helped a friend to install the software on windows 10 pro, the installation is successful but when I open the software from this error, I am attaching a video. What do you recomm

I had this issue before but cannot correct it this time. Using the subject set up on my Win 10 computer, I am now not receiving audio that sounds good. What I hear sounds like the audio is being over-

I can’t figure out how to get CW skimmer to decode my external Rx . I have SDR console and my 101d working fine together. I even have CW Skimmer’s frequency moving when I move my VFO I downloaded virt

Does the b/w filter selection have any effect on RDS decoding? Larry

Ettus USRP N200 Test with Beta SDR Console ===================================== Ettus_USRP N200 with WBX board fitted running under SDR console (Beta, Jan 2022) and UHD 4.0 driver WBX Bandwith set to

Well I have my SDR running with SDR Console on HF bands . I am trying to set up the second receiver, I’ll be using my FTDX 101D I activated it in the “more options” but I need help setting up Omni Rig

I new to SRD how to I download SDR console. -- Thanks you

The station, ARRL_noise_1 has been reset and is back online. ARRL_noise_1 Location is DM52. Antenna is Beverage array. Version 3.0.15 build 1658 Idle Airspy HF+ But alas, the ISP can't handle even a 3

I'm sure this topic has been brought up before, I looked under #HDSDR and I can't find the setup. I would like to set up my RTL-SDR BlogV3 perferably with HDSRD or another SDR program. My end game is

Long-term newbie asks for help to reload his APT Keplers. Once okay but now not. QTH in a built-up location but the sky is free. Kind satellite user needed to detail step by step instructions please.

SDR Console V3.2 beta now available: https://forum.sdr-radio.com:4499/viewtopic.php?f=66&t=1722 V3.2 Release Notes - It's all about the Software Writing low-level stuff to squeeze a CPUs performance i

Hello, I have a few basic, very, questions that I am frankly a bit confused regarding. I'm a long time user of this truly incredible program, but with other receivers. Will blame my simple-minded ques

Hi Simon, is this the one you hinted about long ago: https://microtelecom.it/en Thanks, Mauno

And finally! From Nico: After the forced Covid-19 stops the Friedrichshafen 2022 Ham Radio Messe is back at the door and we at Elad and Microtelecom are pleased to present you the Perseus 22 direct sa

Hello! My goal is to log QO-100 contacts with Log4OM. I do both TX and RX with an Adalm Pluto. I'm wondering if it is possible to link the frequency and mode from SDR Console to Log4OM with the help o

Good morning everyone I use SDR Console with a WinRadio G31DDC. In SDR console I do not have the possibility to have the Band plan. I searched for the file in AppData (SDR-Bandplan_000.xml) but it is