I'm doing some signal processing that involves monitoring a CW beacon with an Elad FDM-S2 and SDR Console 3.2. SDRC is set on mode CW, bandwidth 8 Hz, with frequency centered on the CW signal. Initial

So with FMBC/Band 2 DX season coming up in a few months I was looking at maybe getting hardware that can go past 10 MSPS. Currently have a RSPdx that i primarily use but with 8 MSPS for the extra 12-b

Hello Simon, Do the satellite tracking antenna aiming calculations in SDR Console support a 'flip' mode for satellite passes which cross the end point of the AZ rotor? Requires a 180 degree EL rotor.

Simon, Not sure if this is the place to post ideas for World Map, but I am wondering if it would be possible to add a bearing gauge to the rotor control function similar to what was in HRD. Would real

So, This week I have solar panel installation and am working on 'File Exchange' - easy way to copy files such as Memories, Favourites etc. between computers. Anyone with audio popping - look in the lo

Hello, using my NetSDR with SDR Console shows the Last used frequency, but reception starts at about 10Mcs. I have to change the full Mcs first to have the frequencies of program and receiver synchron

Hi Max, As usual, a really good and Very clear explanation. Appreciate, very much, your taking the time to write it all out for me. Really nice of you. Really helps. Thanks again, Bob ----------------

Does anyone have a v2? I cannot get the drivers to install on my Windows 11 development machine. Am I being extra-stupid? Simon Brown https://g4eli.com https://sdr-radio.com -- - + - + - Please use ht

For about six months, I've used a 1TB SSD to record spectrum from an ELAD S3. Not big chunks, just 400 KHz swaths for 12 hours at a time. As part of reviewing the recordings, there is a lot of forward

Greetings, Does anyone have any instructions in how to use the Data Repeater? Vincent

Hello, Really going to show my ignorance here, but it's the best way to learn. Having a devil of a time trying to get YAND To work. Trying to use the Navtex decoder, YAND, with my Icom R8600. Console

Hi All, Solar installation now working well. UK sourced panels, Huawei inverter, battery etc. Absolutely RF quiet. Simon Brown https://g4eli.com https://sdr-radio.com

All, Next week I'll have a laptop here with the popping problem, so I'll be able to get to the bottom of it. I think I know what's wrong, this will help me fix it. Simon Brown https://g4eli.com https:

Hello all, I have a new RSP1A and I am using SDR-Console with it. Is there a manual or some directions that can tell me the proper way to adjust the LNA gain and the IF gain. Any pointers or help appr

Hello, Will the Icom RC-28 Rotary encoder work with Console ? If not, which will ? (a few possibilities, if possible please) Don’t need a “zillion” buttons, but would prefer a small size physically as

When connecting to my Airspy R2 via the SDRC Server component, the highest bandwidth I can select is 625khz. I don't see anything on the server configuration to adjust to allow for higher options. Wha

Forums will be offline for ~1 hour 'soon' while solar panels are connected. Simon Brown https://g4eli.com https://sdr-radio.com -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting q

Hi All, My D Cluster node will be offline for ~1 hour this morning due to solar panel installation. Simon Brown https://g4eli.com https://sdr-radio.com -- - + - + - Please use https://forum.sdr-radio.

I am having an issue partially resolved. Using auto-mute (properly set), audio would not recover properly with AGC selected on using the AGC button on the top tool bar. Ironically, there are TWO AGC c

Hi all. Has anyone (recently) received an invoice from Apache Labs for the shipping cost of the Hermes board that was announced and and ordered in February 2022? https://apache-labs.com/al-products/10