Has anyone been able to get SDR Console to work in Parallels on a Mac M1 using an SDRDuo or RSPdx? SDR Console loads fine but crashes when you start it. I believe this is because of USB BULK TRANSFER

Does anyone have the download link for Simon's Toolbox? I have it and installed it a while ago and I wanted to recommend the Greyline map that is in it to some folks, but I can't seem to find the link

Trying to use Simon's worldmap here and anything that relies on outside data like space weather, satellites, aurora etc is not working. I'm using Windows 7 Pro, SP1 and Windows Firewall (not windows d

I am trying to connect to remote receivers this morning. In the past, it has worked straight away. Not so this morning (1644z). Please see the attached picture. I get this or similar regardless of the

Returning to this issue. I record using a Lenovo Thinkpad T14 Gen 2 AMD Ryzen, and play back on that laptop or on a Lenovo P1 Gen 3 Intel i7-10750H @ 2.6 GHz 6 core. Both devices suffer from stutterin

I have the latest console 3.2 and the api 3.11 installed and when I try to use the HDR in my rspdx, it disables as soon as i zoom in. heres a video I made showing what its doin https://www.youtube.com

You don't need to reset, just don't change the centre frequency, or use a smaller bandwidth. Simon Brown https://g4eli.com https://sdr-radio.com

Hi All, I haven't yet tried to debug this issue, but I ran into a problem where I've installed SDR Console on a new laptop, I plugged in a Sandisk SSD drive (USB-C) full of recordings from a different

Folks, I made a video using the SDRdou to see how well the diversity mode works when using the phasing to cancel station or an interference. The results are remarkable, if not a little difficult to at

Hi All, Anyone using the LimeMINI with an external reference? I've tried 10MHz and 40MHz on a v1 and v2, just can't get any result. Using Leo Bodnar, 8ma to 32ma output. Works OK with Pluto. What must

Even when receiving an S9+20 to 30 dB ssb signal the display does not go up more than 3 or 4 bars (lines) on average. Is there a way to increase the height of the displayed signal? Thank for any advic

I may just be menu-blind, but is there somewhere in SDR Console to set the sample rate and bit depth of the audio output? Tried to search help, but striking out. Thanks, Frank

I m using a ARINST SDR Dreamkit V2D but can t connect to SDR-Radio.com (V3) Any idea? Regards Alexandra

Is it possible to have two receivers track each other? I want to feed the audio from the same signal to two different outputs so I can optionally listen to the signal why decoding, or decode the same

Received new Hermes Lite2 and do not get any RF output. I did get output with Straight key but on dummy load no output now What could be the problem ?

Odd as the console works bar having to hit gain once started to see waterfall Server accepts request and then seems to send no data and close Both are on LAN All I can see in logs is radio opens in se

Hello, can anyone explain why SDR console frequently locks up when using with Adalm Pluto on QO 100? I am running windows10, I have tried two different PC’s and a laptop, freezes on all devices. I hav

With a very inexpensive noise source you can characterize some of your MF and HF lowpass, highpass, bandpass and notch filters. What a great piece of software by Steve Andrews!! https://youtu.be/xwTEP

Further to this I see that StarTech do an LP4 lead/cable which is available from numerous places. https://www.startech.com/en-gb/cables/lp4satafm12 73s Tracey G5VU ----- Original Message ----- From: T

There are 6 of the Startech 4 port USB cards (as recommended by Simon) currently on ebay.co.uk for a Buy It Now price of £20 each. They are used but represent a large saving over the new price of arou