I am looking for a receiver that has 2 coherent channels and has performance as good or better than a Perseus. Ideally it would receive up to 50MHz. What is available these days? 73 Conrad PA5Y

Here is a construction video on how to build the Large LIL Low Impedance Loop. The size is 9' x9' using 24" wide Hardware cloth. Reception down to 10 KHz is excellent, and there is no chance of over l

Hi I am running RSP1A along with my main radio, IC-7600 and sharing the same antenna in RX using a 3db splitter. I have installed the latest version of SDRC v3..0.27. Briefly my configuration is as fo

Hi All, I am testing with F5OEO’s firmware. If I load the firmware I must run the program below, but how? Please give me a link / info so I can run this, thanks. Simon Brown, G4ELI https://www.sdr-rad

Hey Simon, et. al., First of all, I'm very glad to see that you avoided the military aircraft falling out of the sky in your part of the world. I just wanted to quickly introduce myself to the group a

See: https://forum.sdr-radio.com:4499/viewtopic.php?f=51&t=1014 Simon Brown, G4ELI https://www.sdr-radio.com -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problem

SDR Console v3.0.27 preview: https://sdr-radio.com/download scroll down to 3.0.27 <https://sdr-radio.com/download%20scroll%20down%20to%203.0.27> . Downloads and release notes on the forums: https://fo

I have not used any MIDI controller option, but can I assume that virtually any (USB based) MIDI controller can be used with SDRC, as long as you have the appropriate MIDI mapping? I found one unit, s

26 March 2021 I am thinking of buying a LimeSDR for DATV purposes and others, can they be bought here in the UK? If not where is a safe place to buy one from at the moment? Thanks. -- Best regards, Ch

Hi All, https://forum.sdr-radio.com:4499/viewtopic.php?f=66&t=801&p=4485#p4485 Simon Brown, G4ELI https://www.sdr-radio.com -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting quest

Hi Very pleased to say the G39DDC works virtually perfectly with the 3.0.27 SDR Console. I have only two comments: 1) just a tip--the initial settings in the software are from I-don't-know-where and c

Hi Simon, I think this was near you: https://www.bbc.com/news/uk-england-cornwall-56521380 And you were walking your dog. Barry WB2ZXJ

I’ve had a couple of reports of a crash when switching between HF and VHF. If you have this problem please use the kit below, I can analyse crash dumps better. https://www.dropbox.com/s/abx3luzh4gxa09

Consider using a "Kensington Orbit Trackball with Scroll Ring". www.kensington.com but originally from www.rsi-shop.co.uk Code 62K72337EU £34.25 in 2015. Tel: 0208 7360542 Trackball for fast cursor co

Hi All, RX pane issue resolved. https://forum.sdr-radio.com:4499/viewtopic.php?f=66&t=801&p=4485#p4485 Simon Brown, G4ELI https://www.sdr-radio.com From: main@SDR-Radio.groups.io <main@SDR-Radio.group

Hi, the Receive DSP Panel is acting weird in 3.0.27 Preview. Sections can not be expanded correctly using the small arrow buttons. Tested with Adalm Pluto and SDR-Play RSP2. Something seems to be mess

I am not sure if I saw this option or not but where can I enable the tuned frequency to remain (display) in the middle of the pan display as I tune around with the mouse scroll wheel? I have looked in

Hello, Bandwidth is always a bit confusing to me. Might someone please explain for me the difference between "Bandwidth" in the /Home menu, and the "Bandwidth" option that comes up by clicking on the

Hello, new member here. I am using SDR Console 3.0.26 and have read the PDF manual but must have missed the section on scanning memories. How does one scan the frequencies I have entered into, say, ba

SDR Console v3.0.27 preview: https://www.sdr-radio.com/download. Downloads and release notes on the forums: https://forum.sdr-radio.com:4499/viewtopic.php?f=66&t=801 Simon Brown, G4ELI https://www.sdr