Hello, Back into hobby after some medical issues. Have a new toy; an Icom R8600. Have never used the NOTCH functions, and would now like to ask a few very basic questions on "Notching," using Console

Has support for this SDR been dropped from SDR Console? Regards Paul

Maybe it's time to remove older files to make room? I was attempting to upload the latest "How to operate SDRC on the remote servers" since the current one in storage is from 2018. 73 Kriss KA1GJU

Kriss Kliegle KA1GJU <kliegle@...> added folder /How to use SDRC on the remote servers

I would like to know if it is possible to LOCK the tuner in AirSpy HF+ so that the tuning *needle* is fixed or stationary? In other words, when I change frequencies, the dial is NOT jumping all around

This is just a test of the possibly broken Markdown support at Group.IO. Lets see if the below Markdown verbatim formatting gets broken again. Some large code-pre block (from my dump1090): CRC: A85691

HELLO TO ALL Just a new member to the group and quite new to Console after using SDR# for quite a while. Can give assistance in setting up VDL2 reception using Multipsk ? I have watched a few videos a

I'm doing some signal processing that involves monitoring a CW beacon with an Elad FDM-S2 and SDR Console 3.2. SDRC is set on mode CW, bandwidth 8 Hz, with frequency centered on the CW signal. Initial

So with FMBC/Band 2 DX season coming up in a few months I was looking at maybe getting hardware that can go past 10 MSPS. Currently have a RSPdx that i primarily use but with 8 MSPS for the extra 12-b

Hello Simon, Do the satellite tracking antenna aiming calculations in SDR Console support a 'flip' mode for satellite passes which cross the end point of the AZ rotor? Requires a 180 degree EL rotor.

Simon, Not sure if this is the place to post ideas for World Map, but I am wondering if it would be possible to add a bearing gauge to the rotor control function similar to what was in HRD. Would real

So, This week I have solar panel installation and am working on 'File Exchange' - easy way to copy files such as Memories, Favourites etc. between computers. Anyone with audio popping - look in the lo

Hello, using my NetSDR with SDR Console shows the Last used frequency, but reception starts at about 10Mcs. I have to change the full Mcs first to have the frequencies of program and receiver synchron

Hi Max, As usual, a really good and Very clear explanation. Appreciate, very much, your taking the time to write it all out for me. Really nice of you. Really helps. Thanks again, Bob ----------------

Does anyone have a v2? I cannot get the drivers to install on my Windows 11 development machine. Am I being extra-stupid? Simon Brown https://g4eli.com https://sdr-radio.com -- - + - + - Please use ht

For about six months, I've used a 1TB SSD to record spectrum from an ELAD S3. Not big chunks, just 400 KHz swaths for 12 hours at a time. As part of reviewing the recordings, there is a lot of forward

Greetings, Does anyone have any instructions in how to use the Data Repeater? Vincent

Hello, Really going to show my ignorance here, but it's the best way to learn. Having a devil of a time trying to get YAND To work. Trying to use the Navtex decoder, YAND, with my Icom R8600. Console

Hi All, Solar installation now working well. UK sourced panels, Huawei inverter, battery etc. Absolutely RF quiet. Simon Brown https://g4eli.com https://sdr-radio.com

All, Next week I'll have a laptop here with the popping problem, so I'll be able to get to the bottom of it. I think I know what's wrong, this will help me fix it. Simon Brown https://g4eli.com https: