Just had an email from E-Buyer. Gigabyte Radeon RX 6900 XT GAMING OC 16GB Graphics Card Reduced from £1099 to £750 Still too rich for me, and many others I suspect! Details hereGigabyte Radeon RX 6900

So, I have a spare ELAD S1 for sale, UK only for now, £50 incl. postage. First person to post here gets it. Bloody BREXIT. Simon Brown https://g4eli.com https://sdr-radio.com -- - + - + - Please use h

Some background and then a question at the end. I know that you guys will have the answer. I have an HP-Z440 workstation with an Nvida QUADRO M2000 graphics card and 4 x HP E243 monitors. For weak sig

I just got the RSP1A 5 days ago. I first tried it on my attic antennas which did not work very well. Then I reinstalled my outside antenna (uninstalled) due to construction on the property. When I wen

Any thoughts or experiences that can be shared on using a Thunderbolt Port (3 or 4) for SDR usage? I'm assuming it's possible, but not being familiar with them is what leads me to ask. Hopefully I'm n

Hello all, I am hopeful that the Hermes that I ordered will be shipped soon. I also ordered a 10W PA. The Hammond 1455Q1601 is recommended and there are cutouts for the Apollo amplifier shown here: ht

Hi guys, I would like to switch between antennas with the SDR Console program. For that I would need to have a USB relay board. What type of cards would work nowadays with SDR Console? 73e Michael

This will be a public beta later today With the introduction of the 3.0.10 API some users of the RSP1 and possibly other SDRplay radios are having problems with SDR Console. The logic used in SDR Cons

After having been ex communicado for almost 6 months without any radios, I have just recently managed to put up a small vertical tuned to the 2M band. In the meantime I had to buy a new PC and I am no

I was away, while daughter was taking care of the funny farm. On day one we had a 6 hr power outage that knocked them offline. Then later in the week we had bad storms and the Astron 35 that powers th

I have a couple of SDR Play SDR's: RSP1A and RSP2dx will be found by SDR Console 3.1 and 3.2 but not startable. My RSPduo and RS2PRO not discovered. Must use API 3.09 with SparkSDR and SDRuno to get t

I picked up a Contour Multimedia Controller Express and using it with SDRC - I have programmed one of the buttons to be F5 for TX and it works well - I have programmed the shuttle to be mouse up/mouse

I love the sensitive RDS detector on the V3.2 version of SDR Console. My only complaint is that in DX mode, it can generate a lot of false decodes. It occurred to me that one potential safeguard again

Hello, Question to the radio operators! Have now set up 2 antennas. So 2x dipole directed on the 15 meter band at a height of 3 m to receive Jupiter (Radio Jove) at 20.1 Mhz. Receiver sdrduo. Software

Hello all, I am trying to setup the program before I go to my friend that has the Pluto. I am noticing that if the Pluto is not plugged in the PC the TX part is not shown and I cannot set the TX Part.

Hi Simon, it would be possible to have RF GAIN enabled also for VHF / UHF on Afedri Lan IQ receiver. Thanks

Went back and researched previous messages on this topic and found #49306 ( https://SDR-Radio.groups.io/g/main/message/49306 ) showing the following directory: https://www.sdr-radio.com/Support/Backup

Hello All, A quick video that shows a demonstration of how to use asymmetrical filters for AM broadcast band interference from adjacent channels utilizing both Console V3 and SDR# https://youtu.be/IbD

Hi, I am playing with 2 instances of SDRConsole v 3.2 (latest Beta). One runs an RTL-SDR (by TCP) at 2.048 Mhz and the other one runs an SDRPlay RSP2 at 2.048 MHz. Both have recorded an hour from the

In my response to Pierre about SDRC with FLDIGI I added some embedded pictures inside each response which appeared to post OK, but when I just viewed the post again about an hour later the pictures ar