Hi all. Lightly used G31DDC Excalibur with VSC software included. Includes original packaging, software, manual, NA Power adaptor, data cable and SMA adaptors (female to female) for BNC and SO-259). $

Having switched to version 3.1, I now miss the nifty quick buttons "Back/Forward 10 sec" in the playback navigator. Any chance of getting those back? (I know that they are still in the "Rec/Playback"

While awaiting a reply to my earlier post about installing SDR# with Community Plugins I decided to reinstall the original version for the time being. Initially I had both SDR# and HDSDR installed on

I had previously installed both SDR# and HDSDR on a Lenovo Thinkpad running Windows 7 Home Premium but wanted to take advantage of the optional plugIns. I downloaded the "SDR# with Community Plugins"

1640 WSJP/1540 KXEL /1590 WCGO /1690 WVON /1330 WKTA /1470 WMBD /1000 WMVP https://youtu.be/np4kHhMrTRE Peter Botswana

The 35th Annual NASWA Winter SWL Festival is taking place March 4 & 5, via Zoom again this year. If you're into radio of any kind; shortwave, AM, FM, longwave, utilities, ham radio, everyone is welcom

hello Gang, Here are my new Acrylic Call Sign Displays, with Dual LED Zones and ICOM CI-V Bluetooth hubs or Yaesu FT8X7 Bluetooth interfaces. Drop-in to WWW.VE2DX.COM or contact me at ve2dx@... if int

Often RDS Spy grabs a PI when the native RDS decoder draws a blank. In one case RDS Spy had full RDS when the SDR Console V3.0.26 had nothing! https://youtu.be/9y2X-_eHwHA Peter Botswana

[Forwarded from direct e-mail] The issue: SDRconsole produces spurious transmissions with the Pluto, abt +/- 0.5MHz and +/- 1MHz, other softwares like the "Langstone Project" and the "AMSAT_DL QO-100

Hi Please pardon the question, but does the HDR mode work in SDRConsole? I ask because in SDRuno it only works in the framed bands. Regards Paul

I found the screen where keyboard short cuts can be set, but I don't find the voice keyer in the list. Can I use F1 to F4 for the voice messages 1 to 4? 73 Cedric, ON4CKM

Firstly NetSDR locally works great, needed to set dB gain in definitions higher and cycling dB button on SDR console- hours of pleasure listening. With NetSDR and UDP port opening, I set buffering hig

Trying to get the f/w to match the code build, so that I may finally run the x310 with SDR-Console, my x310 bricked. Managed to flash the FPGA with Vivado (under Linux), and write my previous image ju

My main receiver is an Afedri LAN-IQ and I can access it from anywhere in the world using SDR Console. I love it. My "shack" runs a Windows 11 desktop PC and that's where my antennas feed into my SDRs

Hey there, I'm planning to get one of those SDRs: * USRP X300 * USRP N210 * USRP N200 I've looked at https://www.sdr-radio.com/ettus-research Given the fact that the page says "Should support all Ettu

Having recently purchased an andrus MK1.5 sdr that is in transit it, supports NetSDR, it isn't on the Web Rx supported hardware unsurprisingly as rare. But the compatibility list soapy sdr mentioned a

So, See attached screenshot – 1.8GHz GSM signals. Radio running at 200 MHz bandwidth. Noise figure ~ 3dB, acceptable SNR. Available now from your local Ettus radio dealer. Simon Brown, G4ELI www.dxgal

Hi I cant get console to run even though its loading ok. I also use sdruno which seems fine. Console is seeing the sdrplay as a definition but wont run it. Any help greatly appreciated thanks..

Anyone have success decoding WX from USCG on HF RTTY? What settings do you use? i.e. Band Mode (USB or LSB) Reverse Baud Rate Shift of 850Hz Bits Parity 73 Kriss KA1GJU

Hi all Can anyone help me with a minor problem here. I know there are a lot of smart guys on here, probably not the right place to ask on this subject but failed elsewhere I listen FT8 160m most night