unable to display the External Radio


Gordon LaPoint
 

I'm running SDR Console version 3.1, build 2418.  I had initially setup the External radio window to synchronize the frequency with my radio, using the secondary CAT serial port on DXLabs commander , controlling my remote TS-590sg, which has the RSP1a connected to it.

This was working fine when I set it up, now a couple of days later when I start everything up I can not get the External radio window to show, so I can not get the synchronizing going again.

How do I get the window to show?

Thanks,

Gordon - N1MGO


Simon Brown
 

Add a screenshot as an attachment, it may be hiding somewhere.

Simon Brown, G4ELI
https://www.sdr-radio.com

-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Gordon LaPoint
Sent: 15 November 2021 19:24
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] unable to display the External Radio

I'm running SDR Console version 3.1, build 2418. I had initially setup the External radio window to synchronize the frequency with my radio, using the secondary CAT serial port on DXLabs commander , controlling my remote TS-590sg, which has the RSP1a connected to it.

This was working fine when I set it up, now a couple of days later when I start everything up I can not get the External radio window to show, so I can not get the synchronizing going again.

How do I get the window to show?

Thanks,

Gordon - N1MGO










--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Gordon LaPoint
 

Simon,
   Found it, did not know it was on the  DSP button on the Receive tab.
I'm just learning about this software, trying to get a remote bandscope setup for my remote.  It's working fine, just a bunch of operator errors and learning going on.  I'm still learning, I hope!
Remote description at https://n1mgo.org/
Thanks,
Gordon - N1MGO

On 11/15/2021 14:34 PM, Simon Brown wrote:
Add a screenshot as an attachment, it may be hiding somewhere.

Simon Brown, G4ELI
https://www.sdr-radio.com

-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Gordon LaPoint
Sent: 15 November 2021 19:24
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] unable to display the External Radio

I'm running SDR Console version 3.1, build 2418. I had initially setup the External radio window to synchronize the frequency with my radio, using the secondary CAT serial port on DXLabs commander , controlling my remote TS-590sg, which has the RSP1a connected to it.

This was working fine when I set it up, now a couple of days later when I start everything up I can not get the External radio window to show, so I can not get the synchronizing going again.

How do I get the window to show?

Thanks,

Gordon - N1MGO