Remote encoder


Don Woodward
 

It’s a USB encoder and works with Icom’s RSBA1 software.  Unfortunately, it’s way overpriced - I the transmit bar which I have not seen on another encoder that’s reasonably priced.



73’s

Don W
KD4APP 


From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Simon Brown via groups.io <simon@...>
Sent: Sunday, July 3, 2022 12:57:33 PM
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Elad S2 and SDRC version 3.1
 
Sorry,

I don't know anything about the ICOM R28.

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Don Woodward via groups.io <dbwoodw@...>
Sent: 03 July 2022 14:59
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Elad S2 and SDRC version 3.1
 
We have our own problem - maybe Putin wants both.

Does SDRCONSOLE support the Icom RC28 tuning wheel remote.

Don W
KD4APP 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Simon Brown via groups.io <simon@...>
Sent: Sunday, July 3, 2022 2:55:38 AM
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Elad S2 and SDRC version 3.1
 
There's one big problem residing in No 10 Downing Street many of us would like to send over on a one-way ticket. Any chance you would take him in?

Pretty please?


From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of George Stein - NJ3H via groups.io <nj3h@...>
Sent: 02 July 2022 18:28
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Elad S2 and SDRC version 3.1
 
Hi Simon,

I also installed vers 3.2 just now.  Good eyes.  That fixed that in a flash.  Good eyes!

Now I can get back to the VAC issue. HI HI

At least you can celebrate the 4th of July in that you all off-loaded a real problem some 246 years ago.



Regards,
George




On Saturday, July 2, 2022 at 10:18:36 AM PDT, Simon Brown <simon@...> wrote:


Ribbon bar, Home, Wideband DSP, Auto Mute is enabled.

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of George Stein - NJ3H via groups.io <nj3h@...>
Sent: 02 July 2022 18:10
To: main@SDR-Radio.groups.io <main@sdr-radio.groups.io>
Subject: Re: [SDR-Radio] Elad S2 and SDRC version 3.1
 

Thank you Peter and Jim for your comments.

However, the situation seems worse than I thought.  Please look at the attached picture.  You will notice gaps in the waterfall.  When those gaps occur, the spectrum drops down (as in no signal).

However, when using the Elad native software (which I do not like big time), there are no gaps whatsoever.  Other SDRs that I have are not acting up when using their native software.

So it appears that something in SDRC must be acting up.  I really like SDRC so I hope there is some kind of solution to this problem.

I restarted the computer.  This did not fix the issue.  I am not using a VAC.  The audio is going to the computer speakers.

So any ideas as to what else I can check would be most appreciated.


Regards,
George




On Saturday, July 2, 2022 at 05:55:59 AM PDT, Jim Smith G0OFE <sdr-radio@...> wrote:


THat's not CW, it's the carrier that appears on BC-FM when low or no modulation, such as with gaps in speech.

================================
Need help with SDR Console? If you have a problem:
Go to https://www.sdr-radio.com/support
Please follow instructions in that link.
===================================
Jim, Bournemouth, Dorset. IO90BR.
Elad FDM-S2, Airspy HF+, SDRPlay and Funcube Dongle SDR Recievers
8-element OP-DES for Band 2, 8-element LFA for 2m, 3-element LFA for 6m, 20m Windom for HF,. Wellbrook 1530 Loop for LF


On 02/07/2022 12:16, Peter via groups.io wrote:
Hi George,

Looking at your VAC settings, I see both underflows and overflows.
The first thing I would do is reduce Ms per int from 7 to 4 ( maybe 5 )
You should never see underflows or overflows if everything is running smoothly.

2nd - in your previous message, did I really see CW in the BCFM band ???
If that's so, I'd think your radio's front-end is getting overloaded badly !!

Just my 2 cents worth - but hopefully something useful in it.

Cheers,
Pete.

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Alistair - M5ASF
 

Might one of these work:

https://www.aliexpress.com/item/1005002989778143.html

Cheap as chips!


Don Woodward
 

I looked at that one - it says "multimedia" so I wasn't sure.

I found this one and also found out SDRConsole supports mapping keys to the functions - this one has programmable keys.  For example, I could map the "T" key to TX in SDRConsole and then map "T" to a button on this.  Also looks like you can map the arrow keys to the shuttle to control the frequency.

Buy Contour Design ShuttleXpress - Editing Shuttle with 5 Programmable Buttons - Ergonomic Video Editing Equipment Compatible with Mac and PC Systems: Everything Else - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
73's

Don W.
KD4APP




From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Alistair - M5ASF via groups.io <liverpudd@...>
Sent: Monday, July 4, 2022 5:16 AM
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Remote encoder
 

Might one of these work:

https://www.aliexpress.com/item/1005002989778143.html

Cheap as chips!


Siegfried Jackstien
 

almost

you can use "F5" for tx ... so if you can programm a button to send "f5" ... then it does work


another option is to get a dj deck that speaks midi


works superb (see picture to see my midi deck settings)


dg9bfc sigi

Am 05.07.2022 um 14:01 schrieb Don Woodward:

I looked at that one - it says "multimedia" so I wasn't sure.

I found this one and also found out SDRConsole supports mapping keys to the functions - this one has programmable keys.  For example, I could map the "T" key to TX in SDRConsole and then map "T" to a button on this.  Also looks like you can map the arrow keys to the shuttle to control the frequency.

Buy Contour Design ShuttleXpress - Editing Shuttle with 5 Programmable Buttons - Ergonomic Video Editing Equipment Compatible with Mac and PC Systems: Everything Else - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
73's

Don W.
KD4APP




From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Alistair - M5ASF via groups.io <liverpudd@...>
Sent: Monday, July 4, 2022 5:16 AM
To: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
Subject: Re: [SDR-Radio] Remote encoder
 

Might one of these work:

https://www.aliexpress.com/item/1005002989778143.html

Cheap as chips!