QO-100 External Radio
OK,
This is your problem getting OmniRig working 😊 .
Simon Brown, G4ELI
https://www.sdr-radio.com
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of info@...
Sent: 18 November 2019 08:05
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] QO-100 External Radio
Hi Simon
Please find attached some pictures as requested.
73 Wolfgang
Would it be possible to put an RIT for both RX and TX, on the external radio ,not every one is bang on the same frequency
Regards Barry
I'm even not able to conenct my new IC-9700 as an external radio over USB (COM 3) to your SDR Radio Console v2.0.17
And i'm not using omnrig.
I have absolutly no idea why. I can use LOG4OM and other Software to conenct to my IC-9700 but not with SDR Radio Console.
Does somebody know hot to connect a IC-9700 over USB with the Radio Console 3.0.17?
Great would be to connect the IC-9700 over Ethernet (LAN) with Radio Console 3.0.17.
73 Wolfgang
HB9RYZ
You must use OmniRig, this is your only option.
Simon Brown, G4ELI
https://www.sdr-radio.com
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of info@...
Sent: 24 November 2019 20:39
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] QO-100 External Radio
Hi Simon
I'm even not able to conenct my new IC-9700 as an external radio over USB (COM 3) to your SDR Radio Console v2.0.17
And i'm not using omnrig.
It works now over Omnirig but only as one-way synch solution.
If I change the freq. in the SDR Radio Console it will change in the IC-9700 too.
But if I change the freq. in the IC-9700, it will not change the freq. in SDR Radio console.
I'm running the IC-9700 in the SAT-Mode means with two VFOs.
73 de HB9RYZ
Wolfgang
seems to work, but SDR console does not respond
every time the knob of the FT-818 is tuned. Sometimes it works,
sometimes not. We changed baudrate but this did not help.
The transceiver does always respond to the SDR Console.
My FT-100 works fine! No issues with this. But my computer is much
faster than his.
73 Mike
Am 25.11.2019 um 12:52 schrieb info@...:
Hi Simon
It works now over Omnirig but only as one-way synch solution.
If I change the freq. in the SDR Radio Console it will change in the
IC-9700 too.
But if I change the freq. in the IC-9700, it will not change the freq.
in SDR Radio console.
I'm running the IC-9700 in the SAT-Mode means with two VFOs.
73 de HB9RYZ
Wolfgang
Ah,
I guessed that may be the problem. I heard a few 9700 on QO-100 today, hope to be on QO-100 in two weeks.
Simon Brown, G4ELI
https://www.sdr-radio.com
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of info@...
Sent: 25 November 2019 20:43
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] QO-100 External Radio
Hi Simon
I've got now the correct INI-File for my IC-9700 in order to use Omnirig (see attached INI-File).
Now the freq. is synchronized either by using the SDR Radio Console or with the VFO knob at the IC-9700.
73 de HB9RYZ
Wolfgang
Hi,
I don’t have a 9700 – don’t want one, I have a TS-2000. On QO-100 I’ll use a LimeSDR + LimeRFE + SG-Labs 20watt amplifier.
Simon Brown, G4ELI
https://www.sdr-radio.com
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of info@...
Sent: 25 November 2019 21:25
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] QO-100 External Radio
Hi Simon
Great, so I will hear you soon on the QO-100.
I'm using the Transverte rfrom PE1CMO with a 1.25m dish and Studio-MIC attached to the IC-7900 :-)
By default, Omnirig v1.19 is not delivering an INI-File for the IC-9700. So you can use my INI-File with your IC-9700.
73' Wolfgang