Topics

No audio if AGC is OFF #sdrconsolev3


Stephen Driscoll
 

Hi, 
This something I recently became aware of:  In SDR Console v3.0.24 I get no audio output unless the AGC is set - no sound at all if the agc is off; although the display shows signals.
Am I missing something obvious here? (quite possible!)  Has anyone else experienced this, and how can I fix or get around this ?

Steve


Simon Brown
 

Steve,

 

We’re using the forums now. AGC Off, increase the Gain slider.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Stephen Driscoll
Sent: 08 October 2020 11:54
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] No audio if AGC is OFF #sdrconsolev3

 

Hi, 
This something I recently became aware of:  In SDR Console v3.0.24 I get no audio output unless the AGC is set - no sound at all if the agc is off; although the display shows signals.
Am I missing something obvious here? (quite possible!)  Has anyone else experienced this, and how can I fix or get around this ?

Steve


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


jdow
 

Overload in the audio stream.
{^_^}

On 20201008 03:54:02, Stephen Driscoll wrote:
Hi, 
This something I recently became aware of:  In SDR Console v3.0.24 I get no audio output unless the AGC is set - no sound at all if the agc is off; although the display shows signals.
Am I missing something obvious here? (quite possible!)  Has anyone else experienced this, and how can I fix or get around this ?

Steve


Dale Elshoff WB8CJW
 

There is a few things that interact.  Try various combinations to see what the effect is.

Dale


On 10/8/2020 6:54 AM, Stephen Driscoll wrote:
Hi, 
This something I recently became aware of:  In SDR Console v3.0.24 I get no audio output unless the AGC is set - no sound at all if the agc is off; although the display shows signals.
Am I missing something obvious here? (quite possible!)  Has anyone else experienced this, and how can I fix or get around this ?

Steve


Virus-free. www.avast.com


Max
 

Hi Stephen

As Simon says, adjust the Gain in the AGC panel:



Best

Max


On Thu, Oct 8, 2020 at 05:37 PM, Stephen Driscoll wrote:
Hi, 
This something I recently became aware of:  In SDR Console v3.0.24 I get no audio output unless the AGC is set - no sound at all if the agc is off; although the display shows signals.
Am I missing something obvious here? (quite possible!)  Has anyone else experienced this, and how can I fix or get around this ?

Steve


Stephen Driscoll
 

Thanks,
I knew it was something simple!