Topics

MW Ferrite Loopstick active Antenna fail

nwpac6
 

Anyone using a Ferrite Loopstick Active Antenna setup should avoid this, as it will freeze up SdrConsole 3.0.3
Use the break off as outlined of ending the program with the task manger and removing the USB cable to recover.

Mikael Dagman
 

Have a read here, you have to disable agc before you start the radio. 

https://sdr-radio.groups.io/g/main/topic/frustrating/28633489?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,40,28633489

nwpac6
 

On Thu, Jan 3, 2019 at 07:58 AM, Mikael Dagman wrote:
https://sdr-radio.groups.io/g/main/topic/frustrating/28633489?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,40,28633489
Same problem with the RSP2 radio as outlined, a decreasing of the RF gain to 1 or less may work but "turning off AGC" makes no sense, will wait for the next update version and try again.