CAT for SDR-Radio-Com?


Tom Rohrs <tgrohrs@...>
 

Hi Simon,

Do you still have CAT control scheduled for SDR-Radio-Com?

SpectraVue works extremely well as a panadaptor for my TS-850, but I’m really looking forward to using SDR-Radio.

-Tom-


Simon HB9DRV <simon@...>
 

Hi,

 

Yes – Cat control is already in the console: http://www.sdr-radio.com/Specification/CATCommands/tabid/317/language/en-US/Default.aspx

 

I’ll add telnet support, maybe today.

 

Sadly I’m losing time due to my mother’s death, will be away on Monday for over two weeks.

 

Simon HB9DRV, http://sdr-radio.com

My other radio is the RFspace NetSDR

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of Tom Rohrs
Sent: 03 May 2011 06:03
To: sdr-radio-com@...
Subject: [sdr-radio-com] CAT for SDR-Radio-Com?

 

 

Hi Simon,

Do you still have CAT control scheduled for SDR-Radio-Com?

SpectraVue works extremely well as a panadaptor for my TS-850, but I’m really looking forward to using SDR-Radio.

-Tom-


James Rossell
 

Does this mean I could have control of my K3 and IF attached SDR-IQ from your program and no longer need to use SpectraVue.
Jim, KQ3R



From: Simon HB9DRV
To: sdr-radio-com@...
Sent: Tue, May 3, 2011 12:59:08 AM
Subject: RE: [sdr-radio-com] CAT for SDR-Radio-Com?

 

Hi,

 

Yes – Cat control is already in the console: http://www.sdr-radio.com/Specification/CATCommands/tabid/317/language/en-US/Default.aspx

 

I’ll add telnet support, maybe today.

 

Sadly I’m losing time due to my mother’s death, will be away on Monday for over two weeks.

 

Simon HB9DRV, http://sdr-radio.com

My other radio is the RFspace NetSDR

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of Tom Rohrs
Sent: 03 May 2011 06:03
To: sdr-radio-com@...
Subject: [sdr-radio-com] CAT for SDR-Radio-Com?

 

 

Hi Simon,

Do you still have CAT control scheduled for SDR-Radio-Com?

SpectraVue works extremely well as a panadaptor for my TS-850, but I’m really looking forward to using SDR-Radio.

-Tom-


Simon HB9DRV <simon@...>
 

When fully implemented, yes.

 

Sadly I’m losing time but will catch up.

 

Simon HB9DRV, http://sdr-radio.com

My other radio is the RFspace NetSDR

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of James Rossell
Sent: 03 May 2011 15:23
To: sdr-radio-com@...
Subject: Re: [sdr-radio-com] CAT for SDR-Radio-Com?

 

 

Does this mean I could have control of my K3 and IF attached SDR-IQ from your program and no longer need to use SpectraVue.
Jim, KQ3R

 

 


From: Simon HB9DRV To: sdr-radio-com@...
Sent: Tue, May 3, 2011 12:59:08 AM
Subject: RE: [sdr-radio-com] CAT for SDR-Radio-Com?

 

Hi,

 

Yes – Cat control is already in the console: http://www.sdr-radio.com/Specification/CATCommands/tabid/317/language/en-US/Default.aspx

 

I’ll add telnet support, maybe today.

 

Sadly I’m losing time due to my mother’s death, will be away on Monday for over two weeks.

 

Simon HB9DRV, http://sdr-radio.com

My other radio is the RFspace NetSDR

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of Tom Rohrs
Sent: 03 May 2011 06:03
To: sdr-radio-com@...
Subject: [sdr-radio-com] CAT for SDR-Radio-Com?

 

 

Hi Simon,

Do you still have CAT control scheduled for SDR-Radio-Com?

SpectraVue works extremely well as a panadaptor for my TS-850, but I’m really looking forward to using SDR-Radio.

-Tom-


pbacon <pbacon@...>
 

Is it possible in future releases to allow the user to define the CAT connection speed instead of being fixed at 57,600 kbps. I would like to use the CAT at 9.6 kbps.
Thanks Peter, G3ZSS

--- In sdr-radio-com@..., James Rossell <jrkq3r@...> wrote:

Does this mean I could have control of my K3 and IF attached SDR-IQ from your
program and no longer need to use SpectraVue.

Jim, KQ3R





________________________________
From: Simon HB9DRV <simon@...>
To: sdr-radio-com@...
Sent: Tue, May 3, 2011 12:59:08 AM
Subject: RE: [sdr-radio-com] CAT for SDR-Radio-Com?


Hi,

Yes â€" Cat control is already in the console:
http://www.sdr-radio.com/Specification/CATCommands/tabid/317/language/en-US/Default.aspx


I’ll add telnet support, maybe today.

Sadly I’m losing time due to my mother’s death, will be away on Monday for over
two weeks.

Simon HB9DRV, http://sdr-radio.com
My other radio is the RFspace NetSDR

From:sdr-radio-com@... [mailto:sdr-radio-com@...] On
Behalf Of Tom Rohrs
Sent: 03 May 2011 06:03
To: sdr-radio-com@...
Subject: [sdr-radio-com] CAT for SDR-Radio-Com?


Hi Simon,
Do you still have CAT control scheduled for SDR-Radio-Com?
SpectraVue works extremely well as a panadaptor for my TS-850, but I’m really
looking forward to using SDR-Radio.
-Tom-


Simon HB9DRV <simon@...>
 

Ah – will look at that now, I was always expecting a VAC to be used so this would not be an issue.

 

Simon HB9DRV, http://sdr-radio.com

My other radio is the RFspace NetSDR

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of pbacon
Sent: 04 May 2011 14:50
To: sdr-radio-com@...
Subject: [sdr-radio-com] Re: CAT for SDR-Radio-Com?

 

 

Is it possible in future releases to allow the user to define the CAT connection speed instead of being fixed at 57,600 kbps. I would like to use the CAT at 9.6 kbps.
Thanks Peter, G3ZSS

--- In sdr-radio-com@..., James Rossell wrote:
>
> Does this mean I could have control of my K3 and IF attached SDR-IQ from your
> program and no longer need to use SpectraVue.
>
> Jim, KQ3R
>
>
>
>
>
> ________________________________
> From: Simon HB9DRV
> To: sdr-radio-com@...
> Sent: Tue, May 3, 2011 12:59:08 AM
> Subject: RE: [sdr-radio-com] CAT for SDR-Radio-Com?
>
>
> Hi,
>
> Yes â€" Cat control is already in the console:
> http://www.sdr-radio.com/Specification/CATCommands/tabid/317/language/en-US/Default.aspx
>
>
> I’ll add telnet support, maybe today.
>
> Sadly I’m losing time due to my mother’s death, will be away on Monday for over
> two weeks.
>
> Simon HB9DRV, http://sdr-radio.com
> My other radio is the RFspace NetSDR
>
> From:sdr-radio-com@... [mailto:sdr-radio-com@...] On
> Behalf Of Tom Rohrs
> Sent: 03 May 2011 06:03
> To: sdr-radio-com@...
> Subject: [sdr-radio-com] CAT for SDR-Radio-Com?
>
>
> Hi Simon,
> Do you still have CAT control scheduled for SDR-Radio-Com?
> SpectraVue works extremely well as a panadaptor for my TS-850, but I’m really
> looking forward to using SDR-Radio.
> -Tom-
>


Simon HB9DRV <simon@...>
 

Hi,

 

Where are you seeing CAT set to 57,600? Which window?

 

Simon HB9DRV, http://sdr-radio.com

My other radio is the RFspace NetSDR

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of Simon HB9DRV
Sent: 04 May 2011 15:05
To: sdr-radio-com@...
Subject: RE: [sdr-radio-com] Re: CAT for SDR-Radio-Com?

 

 

Ah – will look at that now, I was always expecting a VAC to be used so this would not be an issue.

 

Simon HB9DRV, http://sdr-radio.com

My other radio is the RFspace NetSDR

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of pbacon
Sent: 04 May 2011 14:50
To: sdr-radio-com@...
Subject: [sdr-radio-com] Re: CAT for SDR-Radio-Com?

 

 

Is it possible in future releases to allow the user to define the CAT connection speed instead of being fixed at 57,600 kbps. I would like to use the CAT at 9.6 kbps.
Thanks Peter, G3ZSS

--- In sdr-radio-com@..., James Rossell wrote:
>
> Does this mean I could have control of my K3 and IF attached SDR-IQ from your
> program and no longer need to use SpectraVue.
>
> Jim, KQ3R
>
>
>
>
>
> ________________________________
> From: Simon HB9DRV > To: sdr-radio-com@...
> Sent: Tue, May 3, 2011 12:59:08 AM
> Subject: RE: [sdr-radio-com] CAT for SDR-Radio-Com?
>
>
> Hi,
>
> Yes â€" Cat control is already in the console:
> http://www.sdr-radio.com/Specification/CATCommands/tabid/317/language/en-US/Default.aspx
>
>
> I’ll add telnet support, maybe today.
>
> Sadly I’m losing time due to my mother’s death, will be away on Monday for over
> two weeks.
>
> Simon HB9DRV, http://sdr-radio.com
> My other radio is the RFspace NetSDR
>
> From:sdr-radio-com@... [mailto:sdr-radio-com@...] On
> Behalf Of Tom Rohrs
> Sent: 03 May 2011 06:03
> To: sdr-radio-com@...
> Subject: [sdr-radio-com] CAT for SDR-Radio-Com?
>
>
> Hi Simon,
> Do you still have CAT control scheduled for SDR-Radio-Com?
> SpectraVue works extremely well as a panadaptor for my TS-850, but I’m really
> looking forward to using SDR-Radio.
> -Tom-
>


Simon HB9DRV <simon@...>
 

Ah – found it...

 

Simon HB9DRV, http://sdr-radio.com

My other radio is the RFspace NetSDR

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of Simon HB9DRV
Sent: 04 May 2011 15:11
To: sdr-radio-com@...
Subject: RE: [sdr-radio-com] Re: CAT for SDR-Radio-Com?

 

 

Hi,

 

Where are you seeing CAT set to 57,600? Which window?

 

Simon HB9DRV, http://sdr-radio.com

My other radio is the RFspace NetSDR

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of Simon HB9DRV
Sent: 04 May 2011 15:05
To: sdr-radio-com@...
Subject: RE: [sdr-radio-com] Re: CAT for SDR-Radio-Com?

 

 

Ah – will look at that now, I was always expecting a VAC to be used so this would not be an issue.

 

Simon HB9DRV, http://sdr-radio.com

My other radio is the RFspace NetSDR

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of pbacon
Sent: 04 May 2011 14:50
To: sdr-radio-com@...
Subject: [sdr-radio-com] Re: CAT for SDR-Radio-Com?

 

 

Is it possible in future releases to allow the user to define the CAT connection speed instead of being fixed at 57,600 kbps. I would like to use the CAT at 9.6 kbps.
Thanks Peter, G3ZSS

--- In sdr-radio-com@..., James Rossell wrote:
>
> Does this mean I could have control of my K3 and IF attached SDR-IQ from your
> program and no longer need to use SpectraVue.
>
> Jim, KQ3R
>
>
>
>
>
> ________________________________
> From: Simon HB9DRV
> To: sdr-radio-com@...
> Sent: Tue, May 3, 2011 12:59:08 AM
> Subject: RE: [sdr-radio-com] CAT for SDR-Radio-Com?
>
>
> Hi,
>
> Yes â€" Cat control is already in the console:
> http://www.sdr-radio.com/Specification/CATCommands/tabid/317/language/en-US/Default.aspx
>
>
> I’ll add telnet support, maybe today.
>
> Sadly I’m losing time due to my mother’s death, will be away on Monday for over
> two weeks.
>
> Simon HB9DRV, http://sdr-radio.com
> My other radio is the RFspace NetSDR
>
> From:sdr-radio-com@... [mailto:sdr-radio-com@...] On
> Behalf Of Tom Rohrs
> Sent: 03 May 2011 06:03
> To: sdr-radio-com@...
> Subject: [sdr-radio-com] CAT for SDR-Radio-Com?
>
>
> Hi Simon,
> Do you still have CAT control scheduled for SDR-Radio-Com?
> SpectraVue works extremely well as a panadaptor for my TS-850, but I’m really
> looking forward to using SDR-Radio.
> -Tom-
>


EA3IN
 

Hi Simon,


Will it be possible to control the sdr-radio console frequency from the MAIN or SUBVFO of the radio (Elecraft K3 in my case)

This will allow to use the sdr as a panadapter or an "integrated" subreceiver (sdr following sub vfo qrg).

I guess it will be easy for you

Thanks in advance

--- In sdr-radio-com@..., "Simon HB9DRV" <simon@...> wrote:

When fully implemented, yes.



Sadly I’m losing time but will catch up.



Simon HB9DRV, http://sdr-radio.com

My other radio is the RFspace NetSDR



From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of James Rossell
Sent: 03 May 2011 15:23
To: sdr-radio-com@...
Subject: Re: [sdr-radio-com] CAT for SDR-Radio-Com?





Does this mean I could have control of my K3 and IF attached SDR-IQ from your program and no longer need to use SpectraVue.
Jim, KQ3R





_____

From: Simon HB9DRV <simon@...>
To: sdr-radio-com@...
Sent: Tue, May 3, 2011 12:59:08 AM
Subject: RE: [sdr-radio-com] CAT for SDR-Radio-Com?



Hi,



Yes â€" Cat control is already in the console: http://www.sdr-radio.com/Specification/CATCommands/tabid/317/language/en-US/Default.aspx



I’ll add telnet support, maybe today.



Sadly I’m losing time due to my mother’s death, will be away on Monday for over two weeks.



Simon HB9DRV, http://sdr-radio.com

My other radio is the RFspace NetSDR



From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of Tom Rohrs
Sent: 03 May 2011 06:03
To: sdr-radio-com@...
Subject: [sdr-radio-com] CAT for SDR-Radio-Com?





Hi Simon,

Do you still have CAT control scheduled for SDR-Radio-Com?

SpectraVue works extremely well as a panadaptor for my TS-850, but I’m really looking forward to using SDR-Radio.

-Tom-


mccoy635
 

Is it possible to send a signal to SDR Console v3 and change audio input from radio on mike to VAC and then back  ?
--
Cecil / W4CM


martin m3ghe
 

Cecil why on earth did you resurrect a 9 year old thread?

--
Martin m3ghe


Simon Brown
 

No, sorry. Quite some request!

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of mccoy635
Sent: 01 August 2020 21:17
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] CAT for SDR-Radio-Com?

 

Is it possible to send a signal to SDR Console v3 and change audio input from radio on mike to VAC and then back  ?
--
Cecil / W4CM


mccoy635
 

Simon I probably did not explain clearly.

I have a program called RoMac Automatic Cw Identifier that I use with my Anan 7000DLE. I have the program working with the Anan using Thetis. I can not get it working using SDR Consolev3.

The id program has various interface options to use to work with different radios. I use the Flex option signal to radio , a serial port to key the radio and a option Switch to USB/VAC/Data Audio to interface the cw audio call sign to the Anan radio with Thetis.

I have tried several interface options with the RoMac id program to get it to work with SDR Console and can get the Anan to transmit but can not get the cw id audio from the sound card routed to the Anan. When the Anan keys the audio I hear is feedback audio from the mike that is manually chose on SDR Console as the audio input on the front panel.

I am not sure if there is another step in Console I need to take or a different setting in the id program.

Thanks for any input.

Cecil

On August 2, 2020 at 12:45 AM Simon Brown <simon@...> wrote:

No, sorry. Quite some request!

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of mccoy635
Sent: 01 August 2020 21:17
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] CAT for SDR-Radio-Com?

 

Is it possible to send a signal to SDR Console v3 and change audio input from radio on mike to VAC and then back  ?
--
Cecil / W4CM

 



 


--
Cecil / W4CM


jdow
 

Indeed that is a big request - Cecil, over on the TestTeam list there is at least one person who is very particular about clicks or ticks in the audio, even if they are a long time between. I believe he is working with sensitive protocols on EME links. Others who could be annoyed are the SSTV folks.

These long period ticks are due to subtle frequency errors between sound cards and front ends. It is a serious effort to get one front end and one sound card speaking happily without any ticks, ticks your ear could easily ignore but digital protocols won't. A tool called a resampler is needed and they almost always work with fixed ratios. Temperature drifts and imprecise knowledge of frequencies suggests some form of phase lock is needed. And that is NOT at all easy to achieve. Adding in another switched port that has to be brought into synchronism is asking a serious lot.

{^_^}

On 20200801 21:45:53, Simon Brown wrote:
No, sorry. Quite some request!
Simon Brown, G4ELI
https://www.sdr-radio.com
*From:*main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> *On Behalf Of *mccoy635
*Sent:* 01 August 2020 21:17
*To:* main@SDR-Radio.groups.io
*Subject:* Re: [SDR-Radio] CAT for SDR-Radio-Com?
Is it possible to send a signal to SDR Console v3 and change audio input from radio on mike to VAC and then back  ?
--
Cecil / W4CM


mccoy635
 

Simon Is there is CAT command to enable/disable VAC in SDR Consolw v3 ?

On August 2, 2020 at 8:42 AM jdow <jdow@...> wrote:


Indeed that is a big request - Cecil, over on the TestTeam list there is at
least one person who is very particular about clicks or ticks in the audio, even
if they are a long time between. I believe he is working with sensitive
protocols on EME links. Others who could be annoyed are the SSTV folks.

These long period ticks are due to subtle frequency errors between sound cards
and front ends. It is a serious effort to get one front end and one sound card
speaking happily without any ticks, ticks your ear could easily ignore but
digital protocols won't. A tool called a resampler is needed and they almost
always work with fixed ratios. Temperature drifts and imprecise knowledge of
frequencies suggests some form of phase lock is needed. And that is NOT at all
easy to achieve. Adding in another switched port that has to be brought into
synchronism is asking a serious lot.

{^_^}

On 20200801 21:45:53, Simon Brown wrote:
No, sorry. Quite some request!

Simon Brown, G4ELI

https://www.sdr-radio.com

*From:*main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> *On Behalf Of *mccoy635
*Sent:* 01 August 2020 21:17
*To:* main@SDR-Radio.groups.io
*Subject:* Re: [SDR-Radio] CAT for SDR-Radio-Com?

Is it possible to send a signal to SDR Console v3 and change audio input from
radio on mike to VAC and then back  ?
--
Cecil / W4CM


--
Cecil / W4CM


Wes Wingo N4KMG
 

Cecil, Would you mind please sharing your settings for the Romac CW identifier and you’re Anan 7000? I’m trying to get the same software to work with my Anan 8000. Ty Sir

73 de N4KMG 
wes


BobS
 

If there is, it is undocumented.

https://www.sdr-radio.com/SerialPort

Bob, W4RLS