From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Conrad, PA5Y via groups.io
Sent: 05 January 2022 13:36
To: main@sdr-radio.groups.io
Subject: [SDR-Radio] Fixed Spectrum Width in waterfall

 

Hello Gentlemen and happy new year.

 

I use SDR console with a transverter and Perseus as a band scope with point and click tuning. I did search the archives for what has previously  been referred to as ‘Fixed Spectrum Mode’ which I think is what I want.

 

Maybe it would be best if I explain the scenario.

 

I want the Waterfall to always display between 144.080 and 144.400 and for this to be fixed. This would be optimal use with the DXSpots markers during a contest. When I click I do not want the waterfall display to move just the receive frequency. I am sure that this must be possible but I cannot find it. I am sorry for being so dumb!

 

Say I click on 144.185 I do not require this to be centred in the main waterfall, it should stay static at a fixed bandwidth. I hope that my explanation is clear.

 

I thought that I may be able to do this by setting the width of the horizontal slider at the bottom of the screen but I cannot fix it to specific lower and upper limits. I want to view around 450kHz and I am sampling with adequate BW on the Perseus. It seems to have been requested but I do not know if it has been implemented yet. If it has I missed it and cannot find out how to achieve it.

 

Regards

 

Conrad PA5Y

 

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Conrad, PA5Y
Sent: 05 January 2022 12:36
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Fixed Spectrum Width in waterfall

 

Ooops and ladies of course.

 

Conrad

 

 

Hello Gentlemen and happy new year.

 

I use SDR console with a transverter and Perseus as a band scope with point and click tuning. I did search the archives for what has previously  been referred to as ‘Fixed Spectrum Mode’ which I think is what I want.

 

Maybe it would be best if I explain the scenario.

 

I want the Waterfall to always display between 144.080 and 144.400 and for this to be fixed. This would be optimal use with the DXSpots markers during a contest. When I click I do not want the waterfall display to move just the receive frequency. I am sure that this must be possible but I cannot find it. I am sorry for being so dumb!

 

Say I click on 144.185 I do not require this to be centred in the main waterfall, it should stay static at a fixed bandwidth. I hope that my explanation is clear.

 

I thought that I may be able to do this by setting the width of the horizontal slider at the bottom of the screen but I cannot fix it to specific lower and upper limits. I want to view around 450kHz and I am sampling with adequate BW on the Perseus. It seems to have been requested but I do not know if it has been implemented yet. If it has I missed it and cannot find out how to achieve it.

 

Regards

 

Conrad PA5Y

 

 

 

--

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown via groups.io
Sent: 05 January 2022 13:39
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Fixed Spectrum Width in waterfall

 

Conrad,

 

Select No action here.

 

 

 

 

Ooops and ladies of course.

 

Conrad

 

 

Hello Gentlemen and happy new year.

 

I use SDR console with a transverter and Perseus as a band scope with point and click tuning. I did search the archives for what has previously  been referred to as ‘Fixed Spectrum Mode’ which I think is what I want.

 

Maybe it would be best if I explain the scenario.

 

I want the Waterfall to always display between 144.080 and 144.400 and for this to be fixed. This would be optimal use with the DXSpots markers during a contest. When I click I do not want the waterfall display to move just the receive frequency. I am sure that this must be possible but I cannot find it. I am sorry for being so dumb!

 

Say I click on 144.185 I do not require this to be centred in the main waterfall, it should stay static at a fixed bandwidth. I hope that my explanation is clear.

 

I thought that I may be able to do this by setting the width of the horizontal slider at the bottom of the screen but I cannot fix it to specific lower and upper limits. I want to view around 450kHz and I am sampling with adequate BW on the Perseus. It seems to have been requested but I do not know if it has been implemented yet. If it has I missed it and cannot find out how to achieve it.

 

Regards

 

Conrad PA5Y

 

 

 

--

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Conrad, PA5Y
Sent: 05 January 2022 15:44
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Fixed Spectrum Width in waterfall

 

Thanks for the speedy reply Simon I will give it a try this evening. What is the most expedient way of setting the band edges? Using the slider at bottom? I know that the edges can be pulled and the centre frequency set in a similar way. Is that best?

 

Regards

 

Conrad

 

 

Conrad,

 

Select No action here.

 

 

 

 

Ooops and ladies of course.

 

Conrad

 

 

Hello Gentlemen and happy new year.

 

I use SDR console with a transverter and Perseus as a band scope with point and click tuning. I did search the archives for what has previously  been referred to as ‘Fixed Spectrum Mode’ which I think is what I want.

 

Maybe it would be best if I explain the scenario.

 

I want the Waterfall to always display between 144.080 and 144.400 and for this to be fixed. This would be optimal use with the DXSpots markers during a contest. When I click I do not want the waterfall display to move just the receive frequency. I am sure that this must be possible but I cannot find it. I am sorry for being so dumb!

 

Say I click on 144.185 I do not require this to be centred in the main waterfall, it should stay static at a fixed bandwidth. I hope that my explanation is clear.

 

I thought that I may be able to do this by setting the width of the horizontal slider at the bottom of the screen but I cannot fix it to specific lower and upper limits. I want to view around 450kHz and I am sampling with adequate BW on the Perseus. It seems to have been requested but I do not know if it has been implemented yet. If it has I missed it and cannot find out how to achieve it.

 

Regards

 

Conrad PA5Y

 

 

 

--

--

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown via groups.io
Sent: 05 January 2022 17:44
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Fixed Spectrum Width in waterfall

 

Yes,

 

Then save as a favourite.

 

 

 

Thanks for the speedy reply Simon I will give it a try this evening. What is the most expedient way of setting the band edges? Using the slider at bottom? I know that the edges can be pulled and the centre frequency set in a similar way. Is that best?

 

Regards

 

Conrad

 

 

Conrad,

 

Select No action here.

 

 

 

 

Ooops and ladies of course.

 

Conrad

 

 

Hello Gentlemen and happy new year.

 

I use SDR console with a transverter and Perseus as a band scope with point and click tuning. I did search the archives for what has previously  been referred to as ‘Fixed Spectrum Mode’ which I think is what I want.

 

Maybe it would be best if I explain the scenario.

 

I want the Waterfall to always display between 144.080 and 144.400 and for this to be fixed. This would be optimal use with the DXSpots markers during a contest. When I click I do not want the waterfall display to move just the receive frequency. I am sure that this must be possible but I cannot find it. I am sorry for being so dumb!

 

Say I click on 144.185 I do not require this to be centred in the main waterfall, it should stay static at a fixed bandwidth. I hope that my explanation is clear.

 

I thought that I may be able to do this by setting the width of the horizontal slider at the bottom of the screen but I cannot fix it to specific lower and upper limits. I want to view around 450kHz and I am sampling with adequate BW on the Perseus. It seems to have been requested but I do not know if it has been implemented yet. If it has I missed it and cannot find out how to achieve it.

 

Regards

 

Conrad PA5Y

 

 

 

--

--

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of sm6fhz via groups.io
Sent: 06 January 2022 09:47
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Fixed Spectrum Width in waterfall

 

Hi Conrad.
HNY!
I hope all is fine at your end.
You can use the "Multi Band" mode as well. It brings many nice possibilities.
73 / Ingolf, SM6FHZ

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of sm6fhz via groups.io
Sent: 06 January 2022 09:47
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Fixed Spectrum Width in waterfall

 

Hi Conrad.
HNY!
I hope all is fine at your end.
You can use the "Multi Band" mode as well. It brings many nice possibilities.
73 / Ingolf, SM6FHZ

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Conrad, PA5Y
Sent: 16 January 2022 16:32
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Fixed Spectrum Width in waterfall

 

I had a look and multiband mode does not appear as a choice in the View part of the receive ribbon.  I had a look here https://www.sdr-radio.com/multi-band but this assumes that the multiband view is available. I am using SDR Console 3.1 with a Perseus. How can I activate this feature? It does look very interesting.

 

Regards

 

Conrad PA5Y

 

 

 

Hi Conrad.
HNY!
I hope all is fine at your end.
You can use the "Multi Band" mode as well. It brings many nice possibilities.
73 / Ingolf, SM6FHZ

--

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Conrad, PA5Y
Sent: 16 January 2022 16:32
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Fixed Spectrum Width in waterfall

 

I had a look and multiband mode does not appear as a choice in the View part of the receive ribbon.  I had a look here https://www.sdr-radio.com/multi-band but this assumes that the multiband view is available. I am using SDR Console 3.1 with a Perseus. How can I activate this feature? It does look very interesting.

 

Regards

 

Conrad PA5Y

 

 

 

Hi Conrad.
HNY!
I hope all is fine at your end.
You can use the "Multi Band" mode as well. It brings many nice possibilities.
73 / Ingolf, SM6FHZ

--

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown via groups.io
Sent: 16 January 2022 17:54
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Fixed Spectrum Width in waterfall

 

Make sure you have the latest Beta.

 

 

 

I had a look and multiband mode does not appear as a choice in the View part of the receive ribbon.  I had a look here https://www.sdr-radio.com/multi-band but this assumes that the multiband view is available. I am using SDR Console 3.1 with a Perseus. How can I activate this feature? It does look very interesting.

 

Regards

 

Conrad PA5Y

 

 

 

Hi Conrad.
HNY!
I hope all is fine at your end.
You can use the "Multi Band" mode as well. It brings many nice possibilities.
73 / Ingolf, SM6FHZ

--