Date
1 - 2 of 2
SDR server synchronize with collocated Kenwood radio?
|
Simon Brown
But,
toggle quoted messageShow quoted text
You must have control of the remote TS-590 in the shack (local), what software are you using for this? Simon Brown, G4ELI https://www.sdr-radio.com
-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown Sent: 27 August 2021 17:11 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] SDR server syncroniz with colocated Kenwood radio? I don't think so... Simon Brown, G4ELI https://www.sdr-radio.com -----Original Message----- From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Gordon LaPoint Sent: 27 August 2021 17:05 To: main@sdr-radio.groups.io Subject: [SDR-Radio] SDR server syncroniz with colocated Kenwood radio? I run a remote setup with a Kenwood TS-590sg and an RSP1a. Can the V3 server be run and synchronized with the Kenwood? I can synchronize the V3 client with the kenwood, but want to access the server over the internet while using the Kenwood via RCForb. Right now to see the SDR display I have to open a remote desktop to the server computer, I would like to eliminate that step. Thanks Gordon - N1MGO -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. -- - + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
|
|
|
Gordon LaPoint
We are using RCForb server at the remote and RCForb client on the local, sometimes with DXLabs for logging and radio control.
toggle quoted messageShow quoted text
I will experiment with using the local SDRconsole that is connected to the remote and see if I can get the local interface going with the Hamlib software interface. Gordon - N1MGO
On 8/27/2021 12:50 PM, Simon Brown wrote:
But,
|
|
|