Date
1 - 9 of 9
SDR Console with Ettus Restarci USRP B210 #ettusb210
|
Has anyone used Ettus Research URSP B210 70MHz-6GHz (or other Ettus product) with SDR Console?
73 Francesco Dì Giovanni - IN3XZP |
|
|
|
I’ve used the B200.
Simon Brown, G4ELI https://www.sdr-radio.com
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Francesco Di Giovanni
Sent: 22 September 2020 14:38 To: main@SDR-Radio.groups.io Subject: [SDR-Radio] SDR Console with Ettus Restarci USRP B210 #ettusb210
[Edited Message Follows] Has anyone used Ettus Research URSP B210 70MHz-6GHz (or other Ettus product) with SDR Console? -- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems. |
|
|
|
Francesco Di Giovanni
Hi Simon, thank you for your answer. Could you please tell me how it runs? Besides Ettus, I have seen on AliExpress a board almost identical. Are the boards the same produced by the same manufacturer? 73 Francesco Di Giovanni - IN3XZP |
|
|
|
Siegfried Jackstien
i bet its a clone dg9bfc sigi Am 22.09.2020 um 17:11 schrieb
Francesco Di Giovanni:
|
|
|
|
Francesco Di Giovanni
Thank you Sigi,
I supposed it. Will the performances be the same? Regards Francesco - IN3XZP |
|
|
|
On Tue, Sep 22, 2020 at 12:44 PM, Francesco Di Giovanni wrote:
Thank you Sigi,How long is a piece of string? -- Martin m3ghe |
|
|
|
jdow
It is very likely a pirated cheap Chinese knockoff.
But you probably had that figured out already.
toggle quoted message
Show quoted text
{^_^} On 20200922 10:11:02, Francesco Di
Giovanni wrote:
|
|
|
|
jdow
On 20200922 14:14:48, martin m3ghe wrote:
On Tue, Sep 22, 2020 at 12:44 PM, Francesco Di Giovanni wrote: Love it. I suppose it draws power which is good if that is the only performance that matters to you. As for meeting specifications? I'd not take that bet to Las Vegas. {o.o} |
|
|
|
Erik. M0MWF
Hi,
I have both used (and loved) my Chinesium B210 on SDR Console. It actually covers about 26MHz through to 6GHz. The 850GBP OXCO from Ettus also has a Chinesium equivelent, and is <100 on Fleabay just now.. Mine cost nearly double that two years ago. You can run the device (in Rx) with the OXCO installed over a single USB's worth of current. Get one of those Y-USB adapters so you can supply it with the current of two USB ports, or use the supplied 6v PSU. The GPS antenna is ~5 GBP too. Consider getting it from Ettus if you can afford it - you'll get a warranty. The NI / Ettus warranty both picks up and delivers. Enjoy. |
|
|