1. SDR-Radio | Main
  2. Topics

Command Line Control of ELAD SW2 with SDR Console

Bill Nollman
 

Hi, I would like to automate the playback of previously captured ELAD S2 wav files with SDR Console. For example I have a 1 hour capture of 92-98MHz and would like to playback 92.1 then after an hour start at the beginning and play 92.3 and so on. I can think of ways to script the timing but am hoping there is a command line interface to SDR Console that allows you to start playback of a set of WAV files and select the frequency and demod settings. Has anyone done any command line control or can point me to some documentation?

 

Thanks,

Bill Nollman

Farmington, CT

 

Simon Brown
 

Bill,

 

Not been done, currently not planned.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Bill Nollman
Sent: 06 June 2020 17:27
To: main@sdr-radio.groups.io
Subject: [SDR-Radio] Command Line Control of ELAD SW2 with SDR Console

 

Hi, I would like to automate the playback of previously captured ELAD S2 wav files with SDR Console. For example I have a 1 hour capture of 92-98MHz and would like to playback 92.1 then after an hour start at the beginning and play 92.3 and so on. I can think of ways to script the timing but am hoping there is a command line interface to SDR Console that allows you to start playback of a set of WAV files and select the frequency and demod settings. Has anyone done any command line control or can point me to some documentation?

 

Thanks,

Bill Nollman

Farmington, CT

 

Bill Nollman
 

Thank you Simon. SDR-Console has SO MANY features it's good to know it's not there and I was missing it. Thank you, Bill

Simon Brown
 

Hi,

 

I was thinking about this – I’ll keep this in mind. I do see a user for a more complete startup command set.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Bill Nollman
Sent: 07 June 2020 14:11
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Command Line Control of ELAD SW2 with SDR Console

 

Thank you Simon. SDR-Console has SO MANY features it's good to know it's not there and I was missing it. Thank you, Bill

N8CVW
 

Hello Simon, All

if i’m understanding the idea,

maybe there could be a ‘configuration save’
command or button 

to easily name, save, and recall a nicely tweaked operational setup

and with a prompt to name/save upon stop or exit 

very nice 👍 console, just beginning with lots to learn

73,

Paul
N8CVW


On Jun 7, 2020, at 10:48 AM, Simon Brown <simon@...> wrote:

Hi,

 

I was thinking about this – I’ll keep this in mind. I do see a user for a more complete startup command set.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Bill Nollman
Sent: 07 June 2020 14:11
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Command Line Control of ELAD SW2 with SDR Console

 

Thank you Simon. SDR-Console has SO MANY features it's good to know it's not there and I was missing it. Thank you, Bill

1 - 5 of 5