No Audio V2.1 b1580
One might apply to the sdr-radio-test-team for acceptance ?
More than a few users appear quite qualified, I would think, even though one can't have TOO many Beta Testers,and Simon may or may not want to limit the Beta list:
http://groups.yahoo.com/neo/groups/sdr-radio-test-team/info
Joe Rotello / Knoxville, TN / USA
I got it figured out........
Apparently, I did not have the audio enabled on VFO A. I was only running the bottom screen at the time so as to not take up too much of the display on my laptop. In the process I had turned the volume ALL THE WAY UP. So when I just so happen to click on VFO B and..............AHHHHHHHH!!!!! LOL :) It about blew my ears off. I was grabbing plugs and all sorts of things so as not to wake my housemate to get the volume turned down. VFO B had the audio enabled and I did not realize it.
Oh, the wonders of amateur and SDR radio. :)
So all is well here :)
Thanks for the reply's :)
73's and Merry Christmas :)
Steve/KC8LQV :)
Steve...
First and foremost, upgrade to latest Beta SDR-Radio V2, as 1580 is now "fairly way old" and superseded by the likes of Build 1608a, etc.
You may find the problem solved by doing so.
Other than that, make sure that the update to 1580 might not have soured the audio source selection in V2 irself...
...and one other thing that I personally saw here was that the audio in 1580 quit and I had to reselect the spectrum and frequency sampling in that area's dialog, and for me 1580 then began working fine again.
One other aspect is make sure that Windows itself still has the proper sound card / on-board audio chip-set or other source selected.
But DO upgrade to the latest Beta... the Beta's run just fine for 99.9% of us, even if marked "beta", and a lot of bug-lets have been solved.
Joe Rotello / Knoxville, TN / USA
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6948 - Release Date: 12/24/13
If you know where b1608 is, could you share a link????
Steve/KC8LQV
Merry Christmas too all.................and to all a good night! :)
To: sdr-radio-com@...
From: joerotello@...
Date: Tue, 24 Dec 2013 19:38:37 -0800
Subject: [sdr-radio-com] RE: No Audio V2.1 b1580
Steve...
First and foremost, upgrade to latest Beta SDR-Radio V2, as 1580 is now "fairly way old" and superseded by the likes of Build 1608a, etc.
You may find the problem solved by doing so.
Other than that, make sure that the update to 1580 might not have soured the audio source selection in V2 irself...
...and one other thing that I personally saw here was that the audio in 1580 quit and I had to reselect the spectrum and frequency sampling in that area's dialog, and for me 1580 then began working fine again.
One other aspect is make sure that Windows itself still has the proper sound card / on-board audio chip-set or other source selected.
But DO upgrade to the latest Beta... the Beta's run just fine for 99.9% of us, even if marked "beta", and a lot of bug-lets have been solved.
Joe Rotello / Knoxville, TN / USA
Steve...
First and foremost, upgrade to latest Beta SDR-Radio V2, as 1580 is now "fairly way old" and superseded by the likes of Build 1608a, etc.
You may find the problem solved by doing so.
Other than that, make sure that the update to 1580 might not have soured the audio source selection in V2 irself...
...and one other thing that I personally saw here was that the audio in 1580 quit and I had to reselect the spectrum and frequency sampling in that area's dialog, and for me 1580 then began working fine again.
One other aspect is make sure that Windows itself still has the proper sound card / on-board audio chip-set or other source selected.
But DO upgrade to the latest Beta... the Beta's run just fine for 99.9% of us, even if marked "beta", and a lot of bug-lets have been solved.
Joe Rotello / Knoxville, TN / USA
I do not make too many posts here, as I usually follow, listen, and learn. In spite of this, I have a small problem.
I am running SDR with a FCDP+. After installing b1580, the audio has cut out and I cannot figure out what happened or what to do.
Can anyone help????
Thanks :)
Steve/KC8LQV