Client and server must both run 1301.

Simon G4ELI/HB9DRV

http://v2.sdr-radio.com/

*From:*sdr-radio-com@... [mailto:sdr-radio-com@...] *On Behalf Of *N2CUA
*Sent:* 18 February 2013 22:33
*To:* sdr-radio-com@...
*Subject:* [sdr-radio-com] SDR Radio Server

Hi Simon ..

Hi Simon ..

Running SDR-Radio .. Set up the server config in the server manager GUI
..

Added the radio ( USB DVB ) .. and set up the account for the user.

Added the port to the FW and to the router for forwarding to my

Workstation. The logfile shows user connect and immediately disconnected.

They get a pop-up with a BIG RED X in it ..

I can connect to my own machine with the same account just fine..



In another case .. my son tries to connect ..

And the connection doesn't show up in the logfile

But in the session tab I get these ..



2013-02-18 15:45:17, Accept> Connection accepted, socket 2384, IPV4 address
204.13.200.248, location (United States)

2013-02-18 15:45:17, Accept> Pending connection NOT found

2013-02-18 15:58:08, Select> Select read



2013-02-18 15:58:08, Accept> Connection accepted, socket 2388, IPV4 address
204.13.200.248, location (United States)

2013-02-18 15:58:08, Accept> Pending connection NOT found

2013-02-18 16:03:08, Select> Select read



2013-02-18 16:03:08, Accept> Connection accepted, socket 2096, IPV4 address
204.13.200.248, location (United States)

2013-02-18 16:03:08, Accept> Pending connection NOT found

2013-02-18 16:21:13, Select> Select read







Any ideas ?



Thanks for a nice program .. J



Randy - N2CUA

I think the second issue in my post is a version issue ..
So the only issue now is the quick connect / disconnect in the erver manager logfile

Randy

--- In sdr-radio-com@..., "N2CUA" <n2cua@> wrote:

Hi Simon ..

Running SDR-Radio .. Set up the server config in the server manager GUI
..

Added the radio ( USB DVB ) .. and set up the account for the user.

Added the port to the FW and to the router for forwarding to my

Workstation. The logfile shows user connect and immediately disconnected.

They get a pop-up with a BIG RED X in it ..

I can connect to my own machine with the same account just fine..



In another case .. my son tries to connect ..

And the connection doesn't show up in the logfile

But in the session tab I get these ..



2013-02-18 15:45:17, Accept> Connection accepted, socket 2384, IPV4 address
204.13.200.248, location (United States)

2013-02-18 15:45:17, Accept> Pending connection NOT found

2013-02-18 15:58:08, Select> Select read



2013-02-18 15:58:08, Accept> Connection accepted, socket 2388, IPV4 address
204.13.200.248, location (United States)

2013-02-18 15:58:08, Accept> Pending connection NOT found

2013-02-18 16:03:08, Select> Select read



2013-02-18 16:03:08, Accept> Connection accepted, socket 2096, IPV4 address
204.13.200.248, location (United States)

2013-02-18 16:03:08, Accept> Pending connection NOT found

2013-02-18 16:21:13, Select> Select read







Any ideas ?



Thanks for a nice program .. J



Randy - N2CUA

ok ... after getting the version issue fixed ..
He connects, but gets disconnected...
Heres the session info ..

2013-02-18 18:25:50, Select> Select read

2013-02-18 18:25:50, Accept> Connection accepted, socket 368, IPV4 address 204.13.200.248, location (United States)
2013-02-18 18:25:50, Accept> Pending connection NOT found
2013-02-18 18:25:50, Select> Select read

2013-02-18 18:25:50, Accept> Connection accepted, socket 2452, IPV4 address 204.13.200.248, location (United States)
2013-02-18 18:25:50, Accept> Pending connection was found
2013-02-18 18:25:50, Accept> Continuing, socket 1 368, socket 2 2452
2013-02-18 18:25:50, Accept> Assigning server index 0, socket 1 368, socket 2 2452...
2013-02-18 18:25:50, Accept> 204.13.200.248 is a WAN connection
2013-02-18 18:25:50, Accept> Loading radio dlls
2013-02-18 18:25:50, Accept> Setting socket 368 and address 204.13.200.248
2013-02-18 18:25:51, Accept> Starting
2013-02-18 18:25:51, (0) Start> Starting
2013-02-18 18:25:51, (0) Start> Creating threads
2013-02-18 18:25:51, Accept> Host aip-248.trustwave.com
2013-02-18 18:25:51, (0) Start> Created thread Input Reader (Part 1)
2013-02-18 18:25:51, (0) Start> Created thread Input Reader (Part 2)
2013-02-18 18:25:51, (0) Start> Created thread Main FFT
2013-02-18 18:25:51, (0) Start> Created thread Data Recorder
2013-02-18 18:25:51, (0) Server Options> Reloaded
2013-02-18 18:25:51, (0) Start> Created thread TCP Sender
2013-02-18 18:25:51, (0) Name Info> Host aip-248.trustwave.com

2013-02-18 18:25:51, (0) CheckHeader> Invalid header size (1)
2013-02-18 18:25:51, (0) ReadCommand> Failed to read message, header checks failed
2013-02-18 18:25:51, (0) Server> Closing channel 1 socket 368
2013-02-18 18:25:51, (0) Server> Closing channel 2 socket 0
2013-02-18 18:25:51, (0) Input Reader (Part 1)> Stop sending
2013-02-18 18:25:51, (0) Input Reader (Part 1)> Stop listener
2013-02-18 18:25:51, (0) Server Stop> Closing thread Input Reader (Part 1)
2013-02-18 18:25:51, (0) Server Stop> Closing thread Input Reader (Part 2)
2013-02-18 18:25:51, (0) Server Stop> Closing thread Main FFT
2013-02-18 18:25:51, (0) Server Stop> Closing thread Data Recorder
2013-02-18 18:25:51, (0) Server Stop> Closing thread TCP Sender
2013-02-18 18:25:51, (0) Server Stop> Closing thread Demod VFO-A
2013-02-18 18:25:51, (0) Server Stop> Closing thread Demod VFO-B
2013-02-18 18:25:51, (0) Server Stop> Closing thread Demod VFO-C
2013-02-18 18:25:51, (0) Server Stop> Closing thread Demod VFO-D
2013-02-18 18:25:51, (0) Server Stop> Closing thread Demod VFO-E
2013-02-18 18:25:51, (0) Server Stop> Closing thread Demod VFO-F

thanks

Randy

--- In sdr-radio-com@..., "RJ" <n2cua@> wrote:

I think the second issue in my post is a version issue ..
So the only issue now is the quick connect / disconnect in the erver manager logfile

Randy

--- In sdr-radio-com@..., "N2CUA" <n2cua@> wrote:

Hi Simon ..

Running SDR-Radio .. Set up the server config in the server manager GUI
..

Added the radio ( USB DVB ) .. and set up the account for the user.

Added the port to the FW and to the router for forwarding to my

Workstation. The logfile shows user connect and immediately disconnected.

They get a pop-up with a BIG RED X in it ..

I can connect to my own machine with the same account just fine..



In another case .. my son tries to connect ..

And the connection doesn't show up in the logfile

But in the session tab I get these ..



2013-02-18 15:45:17, Accept> Connection accepted, socket 2384, IPV4 address
204.13.200.248, location (United States)

2013-02-18 15:45:17, Accept> Pending connection NOT found

2013-02-18 15:58:08, Select> Select read



2013-02-18 15:58:08, Accept> Connection accepted, socket 2388, IPV4 address
204.13.200.248, location (United States)

2013-02-18 15:58:08, Accept> Pending connection NOT found

2013-02-18 16:03:08, Select> Select read



2013-02-18 16:03:08, Accept> Connection accepted, socket 2096, IPV4 address
204.13.200.248, location (United States)

2013-02-18 16:03:08, Accept> Pending connection NOT found

2013-02-18 16:21:13, Select> Select read







Any ideas ?



Thanks for a nice program .. J



Randy - N2CUA

Didnt realize myself that the version went to 1301 recently .. upgrading now .. then will try again and post results

--- In sdr-radio-com@..., "RJ" <n2cua@> wrote:

ok ... after getting the version issue fixed ..
He connects, but gets disconnected...
Heres the session info ..

2013-02-18 18:25:50, Select> Select read

2013-02-18 18:25:50, Accept> Connection accepted, socket 368, IPV4 address 204.13.200.248, location (United States)
2013-02-18 18:25:50, Accept> Pending connection NOT found
2013-02-18 18:25:50, Select> Select read

2013-02-18 18:25:50, Accept> Connection accepted, socket 2452, IPV4 address 204.13.200.248, location (United States)
2013-02-18 18:25:50, Accept> Pending connection was found
2013-02-18 18:25:50, Accept> Continuing, socket 1 368, socket 2 2452
2013-02-18 18:25:50, Accept> Assigning server index 0, socket 1 368, socket 2 2452...
2013-02-18 18:25:50, Accept> 204.13.200.248 is a WAN connection
2013-02-18 18:25:50, Accept> Loading radio dlls
2013-02-18 18:25:50, Accept> Setting socket 368 and address 204.13.200.248
2013-02-18 18:25:51, Accept> Starting
2013-02-18 18:25:51, (0) Start> Starting
2013-02-18 18:25:51, (0) Start> Creating threads
2013-02-18 18:25:51, Accept> Host aip-248.trustwave.com
2013-02-18 18:25:51, (0) Start> Created thread Input Reader (Part 1)
2013-02-18 18:25:51, (0) Start> Created thread Input Reader (Part 2)
2013-02-18 18:25:51, (0) Start> Created thread Main FFT
2013-02-18 18:25:51, (0) Start> Created thread Data Recorder
2013-02-18 18:25:51, (0) Server Options> Reloaded
2013-02-18 18:25:51, (0) Start> Created thread TCP Sender
2013-02-18 18:25:51, (0) Name Info> Host aip-248.trustwave.com

2013-02-18 18:25:51, (0) CheckHeader> Invalid header size (1)
2013-02-18 18:25:51, (0) ReadCommand> Failed to read message, header checks failed
2013-02-18 18:25:51, (0) Server> Closing channel 1 socket 368
2013-02-18 18:25:51, (0) Server> Closing channel 2 socket 0
2013-02-18 18:25:51, (0) Input Reader (Part 1)> Stop sending
2013-02-18 18:25:51, (0) Input Reader (Part 1)> Stop listener
2013-02-18 18:25:51, (0) Server Stop> Closing thread Input Reader (Part 1)
2013-02-18 18:25:51, (0) Server Stop> Closing thread Input Reader (Part 2)
2013-02-18 18:25:51, (0) Server Stop> Closing thread Main FFT
2013-02-18 18:25:51, (0) Server Stop> Closing thread Data Recorder
2013-02-18 18:25:51, (0) Server Stop> Closing thread TCP Sender
2013-02-18 18:25:51, (0) Server Stop> Closing thread Demod VFO-A
2013-02-18 18:25:51, (0) Server Stop> Closing thread Demod VFO-B
2013-02-18 18:25:51, (0) Server Stop> Closing thread Demod VFO-C
2013-02-18 18:25:51, (0) Server Stop> Closing thread Demod VFO-D
2013-02-18 18:25:51, (0) Server Stop> Closing thread Demod VFO-E
2013-02-18 18:25:51, (0) Server Stop> Closing thread Demod VFO-F

thanks

Randy

--- In sdr-radio-com@..., "RJ" <n2cua@> wrote:

I think the second issue in my post is a version issue ..
So the only issue now is the quick connect / disconnect in the erver manager logfile

Randy

--- In sdr-radio-com@..., "N2CUA" <n2cua@> wrote:

Hi Simon ..

Running SDR-Radio .. Set up the server config in the server manager GUI
..

Added the radio ( USB DVB ) .. and set up the account for the user.

Added the port to the FW and to the router for forwarding to my

Workstation. The logfile shows user connect and immediately disconnected.

They get a pop-up with a BIG RED X in it ..

I can connect to my own machine with the same account just fine..



In another case .. my son tries to connect ..

And the connection doesn't show up in the logfile

But in the session tab I get these ..



2013-02-18 15:45:17, Accept> Connection accepted, socket 2384, IPV4 address
204.13.200.248, location (United States)

2013-02-18 15:45:17, Accept> Pending connection NOT found

2013-02-18 15:58:08, Select> Select read



2013-02-18 15:58:08, Accept> Connection accepted, socket 2388, IPV4 address
204.13.200.248, location (United States)

2013-02-18 15:58:08, Accept> Pending connection NOT found

2013-02-18 16:03:08, Select> Select read



2013-02-18 16:03:08, Accept> Connection accepted, socket 2096, IPV4 address
204.13.200.248, location (United States)

2013-02-18 16:03:08, Accept> Pending connection NOT found

2013-02-18 16:21:13, Select> Select read







Any ideas ?



Thanks for a nice program .. J



Randy - N2CUA