Lime SDR and PTT out #poll
I am new to this group.
I have tried a lime sdr (usb 3) with sdr console and it works.
A small amp with a 2n 5109 gives me 3 watt output.
But it does not have a ptt out so I have to switch manualy from rx to tx the antennab relais.
In openhpsdr ( I use that with an Anan 200d and a redpitaya) there is a CAT possibility for PTT.
a simple usb to serial port cable gives switching dsr to - 9 and + nine volts.
My question to Simon is now is it possible to implement that in SDRconsole v3.
Thanks for answering in advance.
Onno (callsign PA0ONO)
Thank you for voting.
See Who Responded
toggle quoted messageShow quoted text
3.0.6 supports GPIO with Lime, I will add some Arduino PTT support as well.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Onno Bakker
A new poll has been created:
1. if i kwow the answer ???
Thanks for answering,
gpio is not wat I am looking for.
gpio needs that gbio board for the lime sdr. That is ihmo tomuch noney.!!
Android is also not wat I am looking for.. in the next
in powersdr 2.5.3, openhpsdr mr x and thetiis is a CAT PTT option that connects direct to an hardware port andthat triggers RTS or DTR low or high if you puch mox or tune. This is a very easy and cheap way to get an tx rx relais working.
The hardware port in my case is an usb to (hardware0 serial port (cable),
So pse try to do something about in the next version.
Very best regards plus 73