ANAN Radios - Borked!
|
Hi,
Now have my ANAN 10E connected, I can confirm that something, somewhere is nicely borked. After a minute or two it goes ’tits-up’. Working on it…
Simon Brown, G4ELI
|
|
|
|
Good Luck Simon!!! |
|
|
|
Exactly.
It was a memory leak (resource leak). Now found, so at least that’s one nasty bug out of the way. Was probably biting me in other parts of the code.
Send out for a new programmer, this one’s past it now 😊 .
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Kriss Kliegle
|
|
|
|
Paul White
Know just how you feel, but you can't give up! The quality of your software (inspiration, function, interface and, apparently, the internals) is just outstanding. Together with your honesty, patience and good humour, this makes you a legend.
Sorry, don't mean to be an ass-licker. |
|
|
|
Augusto <hb9tza@...>
He's
right!
toggle quoted message
Show quoted text
I2JJR Il 29/09/2018 13:53, Paul White ha
scritto:
Know just how you feel, but you can't give up! The quality of your software (inspiration, function, interface and, apparently, the internals) is just outstanding. Together with your honesty, patience and good humour, this makes you a legend. |
|
|
|
😊
Anyway, that resource leak (GDI Objects in Task manager) is fixed. There was also a very slow, similar resource leak elsewhere. The ANAN 10E now runs for hours, I’ll check the TX later but the WX is just too good for sitting indoors.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Augusto
Sent: 29 September 2018 13:00 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] ANAN Radios - Borked!
He's right! Il 29/09/2018 13:53, Paul White ha scritto:
|
|
|
|
Augusto <hb9tza@...>
I'm just planning a
trip to Cornwall with non-ham friends ...
toggle quoted message
Show quoted text
I hope the weather will be the same as you write now! CU, Augusto I2JJR Il 29/09/2018 14:45, Simon Brown ha
scritto:
|
|
|
|
Willi Passmann
Am 29.09.2018 um 14:45 schrieb Simon Brown:
The ANAN 10E now runs for hoursSimon, could you please tell which other ANAN models can be operated with SDR Console after you recent work and if operation will be possible in conjunction with both protocolls (old and new firmware versions)? vy 73, Willi, DJ6JZ |
|
|
|
toggle quoted message
Show quoted text
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Augusto
Sent: 29 September 2018 15:06 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] ANAN Radios - Borked!
I'm just planning a trip to Cornwall with non-ham friends ... Il 29/09/2018 14:45, Simon Brown ha scritto:
|
|
|
|
Hi,
toggle quoted message
Show quoted text
New protocol only, all models except the 7000 (which I will add very soon). Simon Brown, G4ELI www.sdr-radio.com -----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Willi Passmann Sent: 29 September 2018 16:17 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] ANAN Radios - Borked! Am 29.09.2018 um 14:45 schrieb Simon Brown: The ANAN 10E now runs for hoursSimon, could you please tell which other ANAN models can be operated with SDR Console after you recent work and if operation will be possible in conjunction with both protocolls (old and new firmware versions)? vy 73, Willi, DJ6JZ |
|
|
|
paul newcombe <G6YZC@...>
Hello Simon,
Do I take it from the above that the download link for the latest version now contains the none "Borked" version for the Anan's?
Am I also correct in understanding that you still plan on working on a Protocol 1 version of SDRC to run with the Anan range.
I know at this end full TX for the ANAN and Lime's will be well received.
Paul N2EME
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Simon Brown <simon@...>
Sent: Saturday, September 29, 2018 11:49 AM To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] ANAN Radios - Borked! Hi,
I’m here: https://www.sdr-radio.com/Support/Contact
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io>
On Behalf Of Augusto
I'm just planning a trip to Cornwall with non-ham friends ... Il 29/09/2018 14:45, Simon Brown ha scritto:
|
|
|
|
Hi,
The downloadable version is borked. We’ll be testing 3.0.4 next week some time. I will only support the next protocol (Protocol II).
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of paul newcombe
Sent: 29 September 2018 17:25 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] ANAN Radios - Borked!
Hello Simon,
Do I take it from the above that the download link for the latest version now contains the none "Borked" version for the Anan's?
Am I also correct in understanding that you still plan on working on a Protocol 1 version of SDRC to run with the Anan range. I know at this end full TX for the ANAN and Lime's will be well received.
Paul N2EME From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Simon Brown <simon@...>
Hi,
I’m here: https://www.sdr-radio.com/Support/Contact
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Augusto
I'm just planning a trip to Cornwall with non-ham friends ... Il 29/09/2018 14:45, Simon Brown ha scritto:
|
|
|
|
Hi,
I tried Anan-7000DLE / protocol 2 and SDR-Radio 3.0.3 on Win10/64 1803 running on Core i3-530 using Intel HD Graphics. SDR-Radio recognizes the Anan without any problem, and runs absolutely fine for about 1 minute, then it stops, no audio, waterfall stops. Transfer of data from the Anan seems to continue. Stopping and starting the Anan from SDR-Radio reenables sound, until after approx. 1 minute SDR-Radio stops again. This was more than expected so far. Thetis also running fine in this config, and it continues to run without problem. Let me know if I can be of any help in further testing. 73 Folkert PA0FOT |
|
|
|
john@...
Hey Simon,
PA0FOT’s report sounds like the same thing I reported back on 11 November in the “v3.0.4 Kit – October 17th, 2018” thread.
I tried turning off the firewall, sending a logfile, but no resolution at that time. Like PA0FOT, my Anan (200D in my case) and PC work okay with P2 and Thetis.
73, John W1JA
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Folkert pa0fot
Hi, |
|
|
|
Hi,
I’ve invited you to the test team. V3.0.4 is working much better.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Folkert pa0fot
Hi, |
|
|
|
toggle quoted message
Show quoted text
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Helmut oe9eri
I had the same experience when testing 3.0.3 with my new Anan 7000dle and Win10/64 on I7-6700K with Intel HD and would like to join the test-team. |
|
|
|
pinoleronica <pinoleronica@...>
I did not know that the ANAN 7000dle was in the testing fashion. If so, Simon, can I be added?
Rafael / NN3RP
|
|
|