NOAA satellite reception
|
Siegfried Jackstien
I use a home brewed qfh for the Leo birds Works suberb Just some wodden spreaders and two stiff wires... Easy... Cheap... But works DG9BFC SIGI Am 01.09.2018 15:45 schrieb "Steve via Groups.Io" <kc8lqv@...>: What kind of an antenna are you using???? |
|
|
|
Dave (NK7Z)
I am coming in in the middle of this, but if it is the old GOES birds, I use a Discone, and it works very well.
toggle quoted message
Show quoted text
73s and thanks, Dave (NK7Z/NNR0DC) https://www.nk7z.net ARRL Technical Specialist On 09/01/2018 06:45 AM, Steve via Groups.Io wrote:
What kind of an antenna are you using???? |
|
|
|
Steve
What kind of an antenna are you using????
Is it a circularly polarized one????? Steve |
|
|
|
wageners@...
Thank you!
Stefan |
|
|
|
toggle quoted message
Show quoted text
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of wageners@...
Hi Simon, |
|
|
|
wageners@...
Hi Simon,
did you have a chance to look into this. You thought you might have an idea what's going on. Thank you, Stefan VE4NSA |
|
|
|
wageners@...
Sounds like a plan!
Thank you! Stefan, VE4NSA |
|
|
|
I’ll look at this issue soon – I have an idea what’s going wrong.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of wageners@...
Same result here. |
|
|
|
wageners@...
Same result here.
Recorded full pass of NOAA 19 with V3 of the software. Using IC-R8600. When piping audio via VAC to WXtoImg getting only distorted output either live or recorded. Tried different settings in VAC, no changes. NOAA signal received with WFM, 40KHz. Have switched back to SatPC32 with doppler and rotor control and use the Icom audio codec (usb).. Now images are clear. Picture shows example with audio codec (usb): |
|
|
|
John Elliott <jaellio@...>
toggle quoted message
Show quoted text
From: Stu C
Sent: Sunday, 5 August 2018 5:42 PM To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] NOAA satellite reception
Home ribbon, Screenshot (camera Icon). This
On 05/08/2018 08:25, John Elliott wrote: > > SDRconsole used below the black line, then switched to SDR# above the > black line. > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows 10 > > *From: *Simon Brown <mailto:simon@...> > *Sent: *Sunday, 5 August 2018 3:58 PM > *To: *main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io> > *Subject: *Re: [SDR-Radio] NOAA satellite reception > > John, > > There’s an option in the console to take a screenshot – any chance you > could use this? It’s a tad difficult to see the settings like this. > > *Simon Brown*, G4ELI > www.sdr-radio.com <http://www.sdr-radio.com/> > > *From:*main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> *On Behalf > Of *John Elliott > *Sent:* 05 August 2018 06:37 > *To:* main@SDR-Radio.groups.io > *Subject:* Re: [SDR-Radio] NOAA satellite reception > > Here it is see attached… > > cid:image003.jpg@... > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows 10 > > *From: *Simon Brown <mailto:simon@...> > *Sent: *Sunday, 5 August 2018 3:05 PM > *To: *main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io> > *Subject: *Re: [SDR-Radio] NOAA satellite reception > > John, > > Post a screenshot of SDR Console while receiving the satellite. > > *Simon Brown*, G4ELI > www.sdr-radio.com <http://www.sdr-radio.com/> > > *From:*main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io> > <main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io>> *On > Behalf Of *John Elliott > *Sent:* 05 August 2018 05:42 > *To:* main@sdr-radio.groups.io <mailto:main@sdr-radio.groups.io> > *Subject:* Re: [SDR-Radio] NOAA satellite reception > > Appreciate your reply... > > Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end > up with > > cid:image001.png@... > > Seems to be missing a sync signal . Should have ended up with this , > which I get using SDR# . > > cid:image002.png@... > > > > Regards > John Elliott > > On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@... > <mailto:clifftaylor280@...>> wrote: > > Hi John > Are you useing WXtolmg or Multipsk to show image to set it up you > need to have Virtual audio lead installed to link the two programs > together I find the easyest to use is WXtolmg its then straight > forward. > If you require any more help let me know. > Cliff > >
|
|
|
|
Stu C <stu@...>
Home ribbon, Screenshot (camera Icon).
toggle quoted message
Show quoted text
This On 05/08/2018 08:25, John Elliott wrote:
|
|
|
|
John Elliott <jaellio@...>
SDRconsole used below the black line, then switched to SDR# above the black line.
Sent from Mail for Windows 10
From: Simon Brown
Sent: Sunday, 5 August 2018 3:58 PM To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] NOAA satellite reception
John,
There’s an option in the console to take a screenshot – any chance you could use this? It’s a tad difficult to see the settings like this.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Here it is see attached…
Sent from Mail for Windows 10
From: Simon Brown
John,
Post a screenshot of SDR Console while receiving the satellite.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Appreciate your reply...
Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end up with Seems to be missing a sync signal . Should have ended up with this , which I get using SDR# .
On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@...> wrote:
|
|
|
|
John Elliott <jaellio@...>
toggle quoted message
Show quoted text
From: Simon Brown
Sent: Sunday, 5 August 2018 3:58 PM To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] NOAA satellite reception
John,
There’s an option in the console to take a screenshot – any chance you could use this? It’s a tad difficult to see the settings like this.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Here it is see attached…
Sent from Mail for Windows 10
From: Simon Brown
John,
Post a screenshot of SDR Console while receiving the satellite.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Appreciate your reply...
Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end up with Seems to be missing a sync signal . Should have ended up with this , which I get using SDR# .
On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@...> wrote:
|
|
|
|
John,
There’s an option in the console to take a screenshot – any chance you could use this? It’s a tad difficult to see the settings like this.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Sent: 05 August 2018 06:37 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] NOAA satellite reception
Here it is see attached…
Sent from Mail for Windows 10
From: Simon Brown
John,
Post a screenshot of SDR Console while receiving the satellite.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Appreciate your reply...
Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end up with Seems to be missing a sync signal . Should have ended up with this , which I get using SDR# .
On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@...> wrote:
|
|
|
|
John Elliott <jaellio@...>
toggle quoted message
Show quoted text
From: Simon Brown
Sent: Sunday, 5 August 2018 3:05 PM To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] NOAA satellite reception
John,
Post a screenshot of SDR Console while receiving the satellite.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Appreciate your reply...
Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end up with Seems to be missing a sync signal . Should have ended up with this , which I get using SDR# .
On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@...> wrote:
|
|
|
|
John,
Post a screenshot of SDR Console while receiving the satellite.
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Appreciate your reply...
Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end up with Seems to be missing a sync signal . Should have ended up with this , which I get using SDR# .
On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@...> wrote:
|
|
|
|
John Elliott <jaellio@...>
Appreciate your reply... Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end up with Regards John Elliott On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@...> wrote: Hi John |
|
|
|
John Elliott <jaellio@...>
Setup is from SDRconsole is via VAC to Wxtolmg , and I end up with (see attached) Seems to be missing a sync signal Regards John Elliott On 4 August 2018 at 23:17, Simon Brown <simon@...> wrote:
|
|
|
|
Clifford Taylor
Hi John
Are you useing WXtolmg or Multipsk to show image to set it up you need to have Virtual audio lead installed to link the two programs together I find the easyest to use is WXtolmg its then straight forward. If you require any more help let me know. Cliff |
|
|
|
toggle quoted message
Show quoted text
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Can some kind sole give me the setup for receiving the NOAA satellites . The problem seems to be that the software won't see the signal sync. SDRconsole is tracking the signal ok. Setting is WFM. Is there a filter setting I need to change ??. |
|
|