NOAA satellite reception


John Elliott
 

Can some kind sole give me the setup for receiving the NOAA satellites . The problem seems to be that the software won't see the signal sync. SDRconsole is tracking the signal ok. Setting is WFM. Is there a filter setting I need to change ??.


David J Taylor
 

From: John Elliott

Can some kind sole give me the setup for receiving the NOAA satellites . The problem seems to be that the software won't see the signal sync. SDRconsole is tracking the signal ok. Setting is WFM. Is there a filter setting I need to change ??.
=======================================

John,

You might also like to join the Group for Earth Observation (GEO) is you're not already a member. There are a lot of weather satellite enthusiasts there.

Cheers,
David
--
SatSignal Software - Quality software written to your requirements
Web: http://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


David J Taylor
 

URL: https://groups.yahoo.com/neo/groups/GEO-Subscribers/info

Cheers,
David
--
SatSignal Software - Quality software written to your requirements
Web: http://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Simon Brown
 

http://www.sdr-satellites.com/Weather

 

Simon Brown, G4ELI
www.sdr-radio.com

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Sent: 04 August 2018 12:26
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] NOAA satellite reception

 

Can some kind sole give me the setup for receiving the NOAA satellites . The problem seems to be that the software won't see the signal sync. SDRconsole is tracking the signal ok. Setting is WFM. Is there a filter setting I need to change ??.


Clifford Taylor
 

Hi John
Are you useing WXtolmg or Multipsk to show image to set it up you need to have Virtual audio lead installed to link the two programs together I find the easyest to use is WXtolmg its then straight forward.
If you require any more help let me know.
Cliff


John Elliott
 

Setup is from SDRconsole is via VAC to Wxtolmg , and I end up with (see attached)


Seems to be missing a sync signal 


Regards
John Elliott



On 4 August 2018 at 23:17, Simon Brown <simon@...> wrote:

http://www.sdr-satellites.com/Weather

 

Simon Brown, G4ELI
www.sdr-radio.com

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Sent: 04 August 2018 12:26
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] NOAA satellite reception

 

Can some kind sole give me the setup for receiving the NOAA satellites . The problem seems to be that the software won't see the signal sync. SDRconsole is tracking the signal ok. Setting is WFM. Is there a filter setting I need to change ??.



John Elliott
 

Appreciate your reply...

Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end up with

Seems to be missing a sync signal . Should have ended up with this , which I get using SDR# .  




Regards
John Elliott



On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@...> wrote:
Hi John
Are you useing WXtolmg or Multipsk to show image to set it up you need to have Virtual audio lead installed to link the two programs together I find the easyest to use is WXtolmg its then straight forward.
If you require any more help let me know.
Cliff



Simon Brown
 

John,

 

Post a screenshot of SDR Console while receiving the satellite.

 

Simon Brown, G4ELI
www.sdr-radio.com

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Sent: 05 August 2018 05:42
To: main@sdr-radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

Appreciate your reply...

 

Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end up with

Seems to be missing a sync signal . Should have ended up with this , which I get using SDR# .  

 



Regards
John Elliott

 

 

On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@...> wrote:

Hi John
Are you useing WXtolmg or Multipsk to show image to set it up you need to have Virtual audio lead installed to link the two programs together I find the easyest to use is WXtolmg its then straight forward.
If you require any more help let me know.
Cliff

 


John Elliott
 

Here it is see attached…

 

Sent from Mail for Windows 10

 

From: Simon Brown
Sent: Sunday, 5 August 2018 3:05 PM
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

John,

 

Post a screenshot of SDR Console while receiving the satellite.

 

Simon Brown, G4ELI
www.sdr-radio.com

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Sent: 05 August 2018 05:42
To: main@sdr-radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

Appreciate your reply...

 

Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end up with

Seems to be missing a sync signal . Should have ended up with this , which I get using SDR# .  

 



Regards
John Elliott

 

 

On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@...> wrote:

Hi John
Are you useing WXtolmg or Multipsk to show image to set it up you need to have Virtual audio lead installed to link the two programs together I find the easyest to use is WXtolmg its then straight forward.
If you require any more help let me know.
Cliff

 

 


Simon Brown
 

John,

 

There’s an option in the console to take a screenshot – any chance you could use this? It’s a tad difficult to see the settings like this.

 

Simon Brown, G4ELI
www.sdr-radio.com

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Sent: 05 August 2018 06:37
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

Here it is see attached…

 

Sent from Mail for Windows 10

 

From: Simon Brown
Sent: Sunday, 5 August 2018 3:05 PM
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

John,

 

Post a screenshot of SDR Console while receiving the satellite.

 

Simon Brown, G4ELI
www.sdr-radio.com

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Sent: 05 August 2018 05:42
To: main@sdr-radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

Appreciate your reply...

 

Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end up with

Seems to be missing a sync signal . Should have ended up with this , which I get using SDR# .  

 



Regards
John Elliott

 

 

On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@...> wrote:

Hi John
Are you useing WXtolmg or Multipsk to show image to set it up you need to have Virtual audio lead installed to link the two programs together I find the easyest to use is WXtolmg its then straight forward.
If you require any more help let me know.
Cliff

 

 


John Elliott
 

Playboack of original recording

 

Sent from Mail for Windows 10

 

From: Simon Brown
Sent: Sunday, 5 August 2018 3:58 PM
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

John,

 

There’s an option in the console to take a screenshot – any chance you could use this? It’s a tad difficult to see the settings like this.

 

Simon Brown, G4ELI
www.sdr-radio.com

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Sent: 05 August 2018 06:37
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

Here it is see attached…

 

Sent from Mail for Windows 10

 

From: Simon Brown
Sent: Sunday, 5 August 2018 3:05 PM
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

John,

 

Post a screenshot of SDR Console while receiving the satellite.

 

Simon Brown, G4ELI
www.sdr-radio.com

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Sent: 05 August 2018 05:42
To: main@sdr-radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

Appreciate your reply...

 

Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end up with

Seems to be missing a sync signal . Should have ended up with this , which I get using SDR# .  

 



Regards
John Elliott

 

 

On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@...> wrote:

Hi John
Are you useing WXtolmg or Multipsk to show image to set it up you need to have Virtual audio lead installed to link the two programs together I find the easyest to use is WXtolmg its then straight forward.
If you require any more help let me know.
Cliff

 

 

 


John Elliott
 

 

SDRconsole used below the black line, then switched to SDR# above the black line.

 

 

 

Sent from Mail for Windows 10

 

From: Simon Brown
Sent: Sunday, 5 August 2018 3:58 PM
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

John,

 

There’s an option in the console to take a screenshot – any chance you could use this? It’s a tad difficult to see the settings like this.

 

Simon Brown, G4ELI
www.sdr-radio.com

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Sent: 05 August 2018 06:37
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

Here it is see attached…

 

Sent from Mail for Windows 10

 

From: Simon Brown
Sent: Sunday, 5 August 2018 3:05 PM
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

John,

 

Post a screenshot of SDR Console while receiving the satellite.

 

Simon Brown, G4ELI
www.sdr-radio.com

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of John Elliott
Sent: 05 August 2018 05:42
To: main@sdr-radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

Appreciate your reply...

 

Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end up with

Seems to be missing a sync signal . Should have ended up with this , which I get using SDR# .  

 



Regards
John Elliott

 

 

On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@...> wrote:

Hi John
Are you useing WXtolmg or Multipsk to show image to set it up you need to have Virtual audio lead installed to link the two programs together I find the easyest to use is WXtolmg its then straight forward.
If you require any more help let me know.
Cliff

 

 

 


Stu C <stu@...>
 

Home ribbon, Screenshot (camera Icon).
This

On 05/08/2018 08:25, John Elliott wrote:

SDRconsole used below the black line, then switched to SDR# above the black line.

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

*From: *Simon Brown <mailto:simon@...>
*Sent: *Sunday, 5 August 2018 3:58 PM
*To: *main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io>
*Subject: *Re: [SDR-Radio] NOAA satellite reception

John,

There’s an option in the console to take a screenshot – any chance you could use this? It’s a tad difficult to see the settings like this.

*Simon Brown*, G4ELI
www.sdr-radio.com <http://www.sdr-radio.com/>

*From:*main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> *On Behalf Of *John Elliott
*Sent:* 05 August 2018 06:37
*To:* main@SDR-Radio.groups.io
*Subject:* Re: [SDR-Radio] NOAA satellite reception

Here it is see attached…

cid:image003.jpg@...

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

*From: *Simon Brown <mailto:simon@...>
*Sent: *Sunday, 5 August 2018 3:05 PM
*To: *main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io>
*Subject: *Re: [SDR-Radio] NOAA satellite reception

John,

Post a screenshot of SDR Console while receiving the satellite.

*Simon Brown*, G4ELI
www.sdr-radio.com <http://www.sdr-radio.com/>

*From:*main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io> <main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io>> *On Behalf Of *John Elliott
*Sent:* 05 August 2018 05:42
*To:* main@sdr-radio.groups.io <mailto:main@sdr-radio.groups.io>
*Subject:* Re: [SDR-Radio] NOAA satellite reception

Appreciate your reply...

Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end up with

cid:image001.png@...

Seems to be missing a sync signal . Should have ended up with this , which I get using SDR# .

cid:image002.png@...



Regards
John Elliott

On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@... <mailto:clifftaylor280@...>> wrote:

Hi John
Are you useing WXtolmg or Multipsk to show image to set it up you
need to have Virtual audio lead installed to link the two programs
together I find the easyest to use is WXtolmg its then straight
forward.
If you require any more help let me know.
Cliff


John Elliott
 

 

Sent from Mail for Windows 10

 

From: Stu C
Sent: Sunday, 5 August 2018 5:42 PM
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

Home ribbon, Screenshot (camera Icon).

This

 

On 05/08/2018 08:25, John Elliott wrote:

> SDRconsole used below the black line, then switched to SDR# above the

> black line.

> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for

> Windows 10

> *From: *Simon Brown <mailto:simon@...>

> *Sent: *Sunday, 5 August 2018 3:58 PM

> *To: *main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io>

> *Subject: *Re: [SDR-Radio] NOAA satellite reception

> John,

> There’s an option in the console to take a screenshot – any chance you

> could use this? It’s a tad difficult to see the settings like this.

> *Simon Brown*, G4ELI

> www.sdr-radio.com <http://www.sdr-radio.com/>

> *From:*main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> *On Behalf

> Of *John Elliott

> *Sent:* 05 August 2018 06:37

> *To:* main@SDR-Radio.groups.io

> *Subject:* Re: [SDR-Radio] NOAA satellite reception

> Here it is see attached…

> cid:image003.jpg@...

> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for

> Windows 10

> *From: *Simon Brown <mailto:simon@...>

> *Sent: *Sunday, 5 August 2018 3:05 PM

> *To: *main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io>

> *Subject: *Re: [SDR-Radio] NOAA satellite reception

> John,

> Post a screenshot of SDR Console while receiving the satellite.

> *Simon Brown*, G4ELI

> www.sdr-radio.com <http://www.sdr-radio.com/>

> *From:*main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io>

> <main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io>> *On

> Behalf Of *John Elliott

> *Sent:* 05 August 2018 05:42

> *To:* main@sdr-radio.groups.io <mailto:main@sdr-radio.groups.io>

> *Subject:* Re: [SDR-Radio] NOAA satellite reception

> Appreciate your reply...

> Using Wxtolmg and have VAC connecting SDRconsole and Wxtolmg and I end

> up with

> cid:image001.png@...

> Seems to be missing a sync signal . Should have ended up with this ,

> which I get using SDR# .

> cid:image002.png@...

> Regards

> John Elliott

> On 4 August 2018 at 22:04, Clifford Taylor <clifftaylor280@...

> <mailto:clifftaylor280@...>> wrote:

>     Hi John

>     Are you useing WXtolmg or Multipsk to show image to set it up you

>     need to have Virtual audio lead installed to link the two programs

>     together I find the easyest to use is WXtolmg its then straight

>     forward.

>     If you require any more help let me know.

>     Cliff

>

 

 

 

 

 


wageners@...
 

Same result here.

Recorded full pass of NOAA 19 with V3 of the software. Using IC-R8600. When piping audio via VAC to WXtoImg getting only distorted output either live or recorded. Tried different settings in VAC, no changes. NOAA signal received with WFM, 40KHz.

Have switched back to SatPC32 with doppler and rotor control and use the Icom audio codec (usb).. Now images are clear.

Picture shows example with audio codec (usb):


Simon Brown
 

I’ll look at this issue soon – I have an idea what’s going wrong.

 

Simon Brown, G4ELI
www.sdr-radio.com

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of wageners@...
Sent: 06 August 2018 01:06
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

Same result here.

Recorded full pass of NOAA 19 with V3 of the software. Using IC-R8600. When piping audio via VAC to WXtoImg getting only distorted output either live or recorded. Tried different settings in VAC, no changes. NOAA signal received with WFM, 40KHz.

Have switched back to SatPC32 with doppler and rotor control and use the Icom audio codec (usb).. Now images are clear.

Picture shows example with audio codec (usb):


wageners@...
 

Sounds like a plan!

Thank you!

Stefan, VE4NSA


wageners@...
 

Hi Simon,

did you have a chance to look into this. You thought you might have an idea what's going on.

Thank you,

Stefan VE4NSA


Simon Brown
 

Monday of next week.

 

Simon Brown, G4ELI
www.sdr-radio.com

 

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of wageners@...
Sent: 31 August 2018 16:47
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] NOAA satellite reception

 

Hi Simon,

did you have a chance to look into this. You thought you might have an idea what's going on.

Thank you,

Stefan VE4NSA


wageners@...
 

Thank you!

Stefan