Windows device settings allows you to change the com port number under com ports.

A pc clock cannot maintain time accurately. It is all very well setting a very accurate time but after half an hour it will have drifted. I'm not sure what amateur radio part of the hobby requires a s

#future

works now :)

See other tab starts 0 in pic.

Downloaded latest world map 1.2.5 and installed over previous version. got this error when I clicked Stations tab

See this post on another thread. https://sdr-radio.groups.io/g/main/message/62120 Based on this design http://www.kk5jy.net/rf-clipper/

SDR Console server is streaming 8 MHz bandwidth from my RX-888 with no stutter what so ever. Well done Simon. I'm guessing the server can't go any higher in bandwidth. The receiver can.

#sdrserver

I think you need 2 definitions one for internal connections and one for external connections.

Maybe do a recording then play back many times adjusting the settings each time until you get the wanted result.

how is that even possible. 1 second in 30 minutes. You need a new pc mate.

I built the sdr input protection device and it works as expected. Now when I transmit on my other radio the sdr's front end is protected. Well worth the £1 worth of diodes.

I'm transmitting at 100W on the IC-746 and no it doesn't have a monitor. As I don't need to monitor the sdr when I'm transmitting I thought my idea would work. i.e. it will clamp the sdr input when I'

The sdr setup is independent of the transmitter. The transmitter and associated outdoor antenna is separate to the sdr receiver and indoor loop. It turns out my solution could be simple, a couple of d

As I mainly want to use the sdr as a panadaptor it sounds like I need to short the antenna input on the sdr when I transmit on the IC-746 to avoid any damage to the sdr fornt end.

Dave, I think the spurs are noise.

Hi Jdow, Can I damage my RX-888 receiver with indoor loop? It is very overloaded when on the signal. The transmitter is on another outdoor antenna with ICOM IC-746.

FT8 screenshot of my own transmission taken 1 band down whilst transmitting on 20m. Its a good way to check your not over modulating!

The volume is critical for any decoding

https://en.wikipedia.org/wiki/TDF_time_signal Nice detail... Recorded at max resolution and max speed on RX-888 via sdr-console server.

Can't get more than 1 mhz band width with my rx-888. I do have a 3d card and 8ghz memory