Kriss I changed my Lan bandwidth to 10,000 and my Airspy’s R2 are getting 2.4 and 10 mhz now Sent from Mail for Windows

#airspyr2 #sdrconsolev3 #sdrserver

GM Dennis, All LAN connections are 192.168.1.xxx I was hoping not to open the WAN connections on that server to >1,000kHz in order to preserve ISP upload bandwidth for the other three SDRC Servers. 73

#airspyr2 #sdrconsolev3 #sdrserver

Kriss, what are your LAN network addresses? Based on the answer I got from Simon on how he determines what is a LAN and WAN if you are not using RFC1918 addresses (10.x.x.x, 172.16.x.x.x-172.31.x.x or

#airspyr2 #sdrconsolev3 #sdrserver

No joy here on mine. Still getting 612kHz max when used via the server on my own LAN. 73 Kriss KA1GJU

#airspyr2 #sdrconsolev3 #sdrserver

Um R2 run direct at 10 MHz and 2.5 MHz. The Discovery can sample up to 912 ksps. But, for a link limited to 1 MHz the frequency comes out as 10 MHz / 16 for the maximum. This is done with successive "

#airspyr2 #sdrconsolev3 #sdrserver

Ow - my head hurts. Ron, may I please request you use "M" for mega rather than "m" for milli? When I was working on the dithering synthesizer for the GPS satellite M and m were both significant and ge

#airspyr2 #sdrconsolev3 #sdrserver

Divide 10 MHz by integer powers of 2. That will give you some hints about how the server works. {^_-} On 20230215 03:49:21, Kriss Kliegle KA1GJU wrote:

#airspyr2 #sdrconsolev3 #sdrserver

LAN does work at 10 MHz bandwidth. Simon Brown https://g4eli.com https://sdr-radio.com

#airspyr2 #sdrconsolev3 #sdrserver

So when I get back home, I should set the LAN to “ ludicrous speed”** and I will get max out of it? Good to know! ** Cheap shot at the movie Spaceballs 73 Kriss KA1GJU/AM (again)

#airspyr2 #sdrconsolev3 #sdrserver

Yep, This'll be me not wanting to overload my Fractional Resampler (FR). Since this part of the server was written I've greatly optimised the FR so could relax the rates, allowing anything up to 2 MHz

#airspyr2 #sdrconsolev3 #sdrserver

I have an earlier message pending to post but wanted to let you know, I found that the LAN max bandwidth was set to 1000kbs. I changed to 10,000 and I am now seeing all of the expected choices up to 1

#airspyr2 #sdrconsolev3 #sdrserver

Simon, Thanks for the reply. I'm connecting via my local LAN. 1GB connection between them. Remote should be ok as well if I were to use it. It's a 400mbs connection. I will check my server configs aga

#airspyr2 #sdrconsolev3 #sdrserver

I too have an Airspy R2 on my server network (Super station #4) and its max bandwidth is only 625kHz, yet server bandwidth is set for 1MHz via LAN and WAN. 73 Kriss KA1GJU

#airspyr2 #sdrconsolev3 #sdrserver

Ron, The maximum bandwidth is set in the server configuration. High bandwidths require a fast internet. Simon Brown https://g4eli.com https://sdr-radio.com

#airspyr2 #sdrconsolev3 #sdrserver

Wow - you managed a new posting trick, probably thanks to a web mail facility. Attach the image rather than including it inline. Then it can be readable. The image is poor enough I cannot be sure whet

#airspyr2 #sdrconsolev3 #sdrserver

When connecting to my Airspy R2 via the SDRC Server component, the highest bandwidth I can select is 625khz. I don't see anything on the server configuration to adjust to allow for higher options. Wha

#airspyr2 #sdrconsolev3 #sdrserver

I'm trying to remotely decode WeFAX and they never come down straight, a few lines come down, then it slants. Same with SSTV. Modes such as FT8 decode perfectly though. Any idea what's going on here?

#sdrserver

And 100kc works superb on your server :-) Dg9bfc sigi Am 31.01.2023 18:44 schrieb Simon Brown <simon@...>:

#sdrserver

Hi, This also requires that the other station has good uplink bandwidth. Also, make sure the other station has enabled compression. Myself, I enable WAN compression and limit the uplink bandwidth to 1

#sdrserver

On Mon, Jan 30, 2023 at 06:18 PM, Kriss Kliegle KA1GJU wrote: Don't forget, the bottleneck may be at the host site, You got a good point there. I find with my cable service the upload speed is capped

#sdrserver