you have to set up AND down converter (its a transverter right?"?) dg9bfc sigi Am 13.04.2021 um 14:29 schrieb g3zqh via groups.io:

#sdrconsole #sdrconsolev3 #sdr-consolev3

Got it. That worked Rich

#sdrconsole #sdrconsolev3 #sdr-consolev3

#sdrconsole #sdrconsolev3 #sdr-consolev3

Hi This converter function is a nice feature I had not spotted before. I have a 144 to 28MHz transverter (down-converter) in use with ANAN radio but cannot seem to make it work with SDRC in the conver

#sdrconsole #sdrconsolev3 #sdr-consolev3

before start a radio go into radio definitions .. converter offset (white box below radio list) .. click on edit (button next to that white box) ... new window opens (list of the converter(s) added)..

#sdrconsole #sdrconsolev3 #sdr-consolev3

How do I set the 125MHz offset for the Ham it Up converter in SDR Console? Is straight forward in as in SDR#?

#sdrconsole #sdrconsolev3 #sdr-consolev3

Hi, It may have been due to CPU load on your PC. Video recording is quite CPU-intensive, at least the way I designed it 😊 . Simon Brown, G4ELI https://www.sdr-radio.com

#sdrconsolev3 #airspyhfplus

Gggrrr!! I go away from the Console, watch two races of the Americas Cup and have dinner, launch Console, video record session and perfect copy, damn it! Sorry to trouble you Simon and anyone else. Ne

#sdrconsolev3 #airspyhfplus

Hi, Looks like it couldn’t get started – let’s see the logfile. Simon Brown, G4ELI https://www.sdr-radio.com

#sdrconsolev3 #airspyhfplus

I've had a couple of goes at recording the console but each time after clicking the Stop button the recording information on the bottom bar continues to count the time but a message titled "Finalising

#sdrconsolev3 #airspyhfplus

" b) Tony's advice is a bit spurious. "Set RF Gain to automatic" is very generally bad advice. " Wasn't me. I suggested running at the same bandwidth in both pictures to make them easier to compare. T

#sdrconsolev3 #sdr-consolev3

Hi, This is an informal group, the official support is online (see bottom of this message). Just post screenshots with questions, Summer E’s coming soon. Simon Brown, G4ELI https://www.sdr-radio.com

#sdrconsolev3 #sdr-consolev3

Thanks, changed to B-FM and can now hear Radio 2 clearly. Just got to get to grips with everything thing else now!

#sdrconsolev3 #sdr-consolev3

One thing about the visible noise floor (spectrum) – Console uses filters which keep peaks but flatten the noise, without this the spectrum will flicker like crazy and I don’t like that. Check the 1 e

#sdrconsolev3 #sdr-consolev3

I see several problems. But first, I am glad your +40 dBm was a typo for -50 dBfs. 1) Chief among them is your expectation that either SDRSharp or SDRC is really calibrated. SDRC makes a loose effort

#sdrconsolev3 #sdr-consolev3

FWIW, the screens would compare more clearly if you were using the same bandwidth. It looks like you are running about 300Khz BW in SDRC but closer to 2Mhz in SDR#. You might try running both with the

#sdrconsolev3 #sdr-consolev3

Phil, The two programs show different things, SDR# dB full scale, SDR Console attempts to show something roughly like the signal level (dBm). In Console select B-FM (Broadcast FM) for Stereo FM recept

#sdrconsolev3 #sdr-consolev3

Hi home screen tab screenshot as requested, gain is set to automatic. Phil

#sdrconsolev3 #sdr-consolev3

Please show screen shot of home tab not view. try changing RF Gain to automatic on home tab

#sdrconsolev3 #sdr-consolev3

Dear Simon, Thanks for your reply. I have attached two screen shots, one is the SDR sharp, the other is SDR consol. Hope you can see something. Regards, Phil. G8PJH

#sdrconsolev3 #sdr-consolev3