Does not answer your question but... I'd love a Reset button that restored all DSP-type settings to some kind of "everything off" default (such as the values when SDRC is installed). Note that's not a

#sdrconsole

Might be nice if that region had an "Audio" header strip similar to the IF Display, Mode, etc panes lower down the DSP window? Just a thought.

#sdrconsole

Hello, Several months ago I had a big problem with broadband chirping noise. All over. Dis-abling NR4 corrected it. It's back, and probably something i inadvertently changed in the AGC and/or the NR1

#sdrconsole

Hi, Thanks. Never would have found it ! Appreciate the help, Bob

#sdrconsole

Virus-free. www.avast.com

#sdrconsole

Hello, Re Pseudo Stereo: Where do I find the "Audio Dropdown" menu they refer to, in order to verify that the L and R channels are being used ? Looked in the various Audio menus I could find, but don'

#sdrconsole

Hi Thank you very much. Appreciate the help. Lots to know, at least for me. Regards, Bob

#sdrconsole

Bob it is for any mode on any frequency below 2MHz. But to make use of it you must select a Bandwidth/sample rate of the Low IF type so that is 2MHz or below. You can do that when starting the radio o

#sdrconsole

Oh ok. Enhanced in what way? Larry

#sdrconsole

Larry please, this has nothing to do with IBOC radio stations. HDR in the RSPdx may best be described by "high dynamic range", i.e. less intermodulation and spurious responses on MF and LF compared to

#sdrconsole

Hi Terminology is the problem here. The SDRPLAY RSPdx has what they call a HDR mode. You can call it up in SDRUno and Console. Provides enhanced listening below 2 MHz. Different from the HD Radio you

#sdrconsole

Bob That refers to high definition radio in this case HDR AM stations in the AM radio broadcast band below >2 MHz. There are not many HDR AM radio stations. It was first allowed by the FCC in 2003 but

#sdrconsole

Hello, Have a RSPdx and thought it was about time I tried out the HDR mode that they mention. Have a few questions re using it, please: a. do you folks who use it find it a definite improvement ? All

#sdrconsole

Dear OMs and YLs, since yesterday i have had a problem with pluto transmission. The transmission frequency can no longer be synchronized with the reception frequency and always remains at 10489750000

#sdrconsolev3 #sdr-consolev3 #sdrconsole #qo100 #pluto

From the Windows-10 Data Usage applet. Showing the Ethernet data volume of the last 30 days. I've been using SDR Console with my just acquired Afedri-SDR Net for only 3 days. Wow!

#sdrconsole

Add a function(Feature) to the TM2 capabiliity? Possibly make F3,F4 a) Switch between Rx's? Or b) Zoom +/- on the displayed Rxs' range. tnx Dave KK7SS

#future #sdrconsole

Hi, See https://www.sdr-radio.com/tmate-2 for current support. Simon Brown, G4ELI https://www.sdr-radio.com

#sdrconsole

Hi Simon, I've been lucky enough to get a used ('as-new) TM2, and I'm trying it with SDR-Console. I can't seem to find anything changing using the F3 & F4 buttons.. ! What am I not doing? Thanks Dave

#sdrconsole

Hi All I have three different Instances: 1. MAIN: for QO-100 with SDRPlay RSP2 which shows 10'489'740.00 GHZ with converter Settings 2. for remote Spyserver (1.8 MHz to 30 MHz) 3. for local Panadapter

#rsp1a #sdrconsole

OK let's trace what it does as you increase the input amplitude and are not using hang AGC. That is the "oldest" form of AGC. At very low levels you have a fixed gain. As the signal goes up the demodu

#sdrconsole