SDRC is not designed to support side-by-side installations. A proper such design would not use the same registry and %apdata% folders for storing settings, thus making them truly independent of each o

#rtl

Hi I am using RTL-SDR v3 with Raspberry pi and want to receive DVB-T using some software like keffeine and w-scan but if I need to increase the gain value to receive weak signal and set it static as m

#rtldrivers #rtl #rspduo

So, on a tip I did the mod that brought the input to the q branch. I had to add in a wire jumper, and now I receive on the rtladr. I did not realize this was an see console only group.. but.. I will s

#kenwood #ts-2000 #huprf #hdsdr #rtl

Put another way, Simon why are the RTLs limited to a bandwidth of 300 kHz in TCP mode using the server?

#sdrserver #rtl

Well my 1545 is dual core 2.8 Intel and 4 gig of ram. The Laptop runs Unitrunker all day 24-7. Also its windows 7 home premimum. Maybe I will repurpose for SDR Console server. Now will I be able to us

#network #rtl

Hi TheTechGB, I've having the same problem, connecting to the server OK but just receiving static on the remote computer, gain is set to auto, how did you solve it? Rgs, Ken113.

#sdrconsolev3 #rtl #sdrconsole

On the "Home" tab, press "Radio Configuration". Then in the new window, select "HF Mode, Tuning" and make sure "Quadrature (Q)" is selected. SDR Console will then automatically enable/disable direct s

#rtl

Hello, I have done a search and did not find much on the IC-910 and satellite control. My gear I have is a IC-910 with two IF pan adapter outputs (1 for Main and 1 for Sub bands) 2 rtl dongles Yaesu G

#rtl #satellites

Have a similar problem but have found no solution yet

#rtl

I use Splashtop in my remote site. Price is quite reasonable and one feature I like, there is a virtual arrow keys. Helps in tuning.

#rtl

Which would you say is better for FT8 decoding? 2.4Mhz or <300kHz?

#rtl

Hi, Look at the website, use the Serach function. There are links to DSD etc. Simon Brown, G4ELI https://www.sdr-radio.com

#rtl #feature #sdrconsolev3

Hi Simon Thanks for the reply, as Direct Sampling will be added in the next version, I won't bother you further with these issues. Thanks for a great piece of software. 73 Ian G4GIR

#rtl

Did you install V3.0.9 in the same folder as V3.0.7, or did you you install V3.0.9 in a new folder? If so, you may have to reinstall all the RTL-SDR drivers.

#rtl #sdrconsolev3

Hi grup, these files inside the sdr console v3 folder, create a diver2 folder and put everything in. Launch rtl_eeprom.exe the driver and relaunch the file for serial control registration https://gith

#sdrconsolev3 #rtl

Hi Don, Doubt I’ll be over on your side of the pond any time soon, would be nice to be at the Dayton show without the travelling and expense 😊 . Simon Brown, G4ELI www.sdr-radio.com

#rtl #sdrconsolev3 #sdrsharp

from rtl-sdr forum https://www.rtl-sdr.com/forum/viewtopic.php?f=9&t=4675 "Remember that at it's core the KerberosSDR is four RTL-SDR dongles. So it can certainly be used as four independent RTL-SDR d

#rtl #rtldrivers #request #feature

no ... do not make it adjustable by the user ... hardcoded is fine better add a "lock to cw (or any other carrier) function if your setup is "only" 100kc off ... you are lucky a few days ago i had a v

#rtl

I finally was able to try my SpyVerter with RTL-SDR v3 dongle. The first problem I encountered was attempting to calibrate against WWV on 10 MHz. With the 120 MHz correction factor enabled, the receiv

#rtl #request

What’s just labeled FM in the states? FM (88-108mhz) is called FM in the states. But in ham radio world we distinguish the different FM modes as NFM= Narrow FM, WFM=Wide FM and BFM=Broadcast FM. You’l

#rtl #sdrconsolev3