Still having this issue.

#rsp1a #ts-590

Hi, If there’s a service problem it’s best to report this to SDRplay – their service should be bullet-proof. Simon Brown, G4ELI https://www.sdr-radio.com

#sdrconsolev3 #sdrplay #rsp1a #bug

The list is in the previous comments. https://sdr-radio.groups.io/g/main/message/58136

#rsp1a

This is working very well indeed. I am using an LNB with a high stability oscillator and the sdr-console locks and stays locked to the beacon.

#rsp1a #satellites #sdrconsolev3 #qo100

Hi All I have three different Instances: 1. MAIN: for QO-100 with SDRPlay RSP2 which shows 10'489'740.00 GHZ with converter Settings 2. for remote Spyserver (1.8 MHz to 30 MHz) 3. for local Panadapter

#rsp1a #sdrconsole

first question, Can someone tell me if it is possible to change frequency at any position in the spectrum ...? I would like to be located on any frequency by the selected band anywhere, But every time

#sdrconsolev3 #rsp1a #workspace

Define "bandwidth". I know that sounds funny but it depends where in the SDR signal chain you're referring to. IF bandwidth can be set as narrow as you want. But I think the real problem is LO phase n

#rsp1a

Thomas Obviously de-power and re-power the radio by unplugging the USB cable. Only plug direct to PC USB or use powered USB hub. Insufficient USB power causes many issues. Try a different USB cable. A

#sdrconsolev3 #rsp1a

But I am cheeky ;-) Thanks for the reply

#rsp1a #hdsdr #sdruno

Hi, I have noticed that even though I set ctcss tone to receive only when signal+tone option are met - despite this I keep receiving some noise - and my squelch is around 80% on NFM.. I am positive no

#rsp1a

Thanks Simon. I found an excellent video here that had the setting I needed: https://www.youtube.com/watch?v=jmdFbFPVXGs I had the IF frequency incorrectly set which was leading to weird things. The I

#rsp1a

Hi, AM, FM – yes. Simon Brown, G4ELI https://www.sdr-radio.com

#sdrconsolev3 #rsp1a

(more fully formed) for each running receiver: the ability to save a number of configuration tuples. 'receiver' here not in the sense of receiving hardware itself, but including each active tuned freq

#rsp1a

video https://youtu.be/nUeITF3zOTM screenshot from the video https://www.dropbox.com/s/ogjd76j07o7rc05/a1.png?dl=1 Today after around 40 minutes of operation the program totally frozen after changing

#sdrplay #sdrconsolev3 #rsp1a

Hi, Start here: https://www.sdr-radio.com/Console/ExternalRadio Simon Brown, G4ELI https://www.sdr-radio.com

#sdrconsolev3 #rsp1a #ts480

Hi, Your first posting to this list is automatically moderated, now you’re free to post as much as you want. There will always be latency with a satellite, the extra latency with the RSP1a comes from

#rsp1a #satellites

I can't stand the GUI of SDRUno. Far too many windows!! Functionally (RF wise) I don't have a problem with it, but the usability of the front facing interface/design is a total mess, my opinion only o

#sdrconsolev3 #rsp1a

Limesdr -- with proper driver -- 0hz to 4.8ghz, low power ... But steep learning curve if new to sdr ... I can Tx under Linux ( openSUSE, Ubuntu ) with SdrAngel .... not tried to use sdr-radio in a vi

#rsp1a #satellites

Click the first button: Enable Tracking. This may have something to do with it. Simon Brown, G4ELI https://www.sdr-radio.com

#sdrconsolev3 #rsp1a

I did in the original message, now I rebooted and re-installed v 3.0.10 and all is working as expected again. The Start button turns grey and the stop button black and tuning works OK for both RSP1a a

#rsp1a