Hi, It may have been due to CPU load on your PC. Video recording is quite CPU-intensive, at least the way I designed it 😊 . Simon Brown, G4ELI https://www.sdr-radio.com

#sdrconsolev3 #airspyhfplus

And after playing with SpyServer for the first time - I see Youssef has seen fit to not export gain controls on the Discovery, which means it must be used as designed. {^_^}

#airspyhfplus #sdrserver #sdrsharp

A bit beside the discussed thread, but related, is that the only real thing for me on which I rely is the SNR indication which is both a nice feature on SDRuno and SDRconsole. Also your ears are not t

#sdrconsolev3 #airspyhfplus

When upgrading firmware it is a good practice to use the vendor's recommended software, SDR# in this case, to verify operation and check versions before upgrading. If there is a problem this will elim

#airspyhfplus #firmware

Answered in a PM to you. RFI still presents regardless of ground connection My mistake, it's the RU-1:1 Yes, the RFI is still present albeit of lesser intensity. I attached a pigtail to one of the nut

#airspyhfplus #sdrconsolev3

I have started using a K3s with Airspy HF+ Discovery- I use the IF out from the K3s directly to the Air Spy. Everything is working 100% apart from the following, when I tune the VFO on the K3s - on SD

#airspyhfplus

NDB's poppin' tonight from EM65

#airspyhfplus #sdrconsolev3

Hello Alan, Thank you for your additional tests. Werner has been kind enough to further elucidate his findings in his e-mail message below. Thank you both for providing further data regarding these is

#airspyhfplus #airspy

Sorry forgot the link https://youtu.be/PU_Gaiu3IGw

#airspy #airspyhfplus

Good morning, Maybe I am doing the wrong think but I noticed my HF+ has a 4Hz drift (measured with 5000 FORT Collins and CHU Canada. Then I try to calibrate it and I follow directions under the calibr

#airspyhfplus

I updated the Audio Realtek driver, no change. Also tried to update the Network Adapter drivers, but no updates were required. Sometimes the audio is totally unusable, other times it settles down when

#sdrconsolev3 #airspyhfplus #sdrplay

Not enough shielding. Probably leaks RF like a sieve. N0UU. Looks pretty though.

#sdrsharp #airspy #airspyhfplus #sdrconsolev3

Maybe rtl_tcp

#airspy #sdrsharp #airspyhfplus #ubuntu1604

Mmmm, OK, but I was disconcerted to see an 8MHz frequency when recording an 11MHz frequency. Just a bit odd but all good.

#sdrconsole #airspyhfplus

Brent, For the future: please start a new thread with a title that identifies the problem, this helps me keep track of issues. Thanks, Simon Brown, G4ELI www.sdr-radio.com

#airspyhfplus

Thanks for the responses folks. Kriss - that's all noted. I'll keep an eye out for any further freezes and attach images plus logfiles. Simon - yes, I can restart the console display by just clicking

#airspyhfplus

Hello, i have tested AirSpy HF+ with SDR# and SDR Console V3.0 Test AirSpy locally connected to my PC at USB and compare test via LAN ( Raspi with Spy Server) Both software shows the same result here.

#airspyhfplus

Tico, Sorry – I can’t – you’ll have to ask in the Airspy group (I have never set up a SplyServer). Simon Brown, G4ELI www.sdr-radio.com

#sdrsharp #airspyhfplus

Might as well cut-n-paste this. It mirrored my experience exactly. "It works! But I did have lots of crashes/freeze ups, even though the choices of bandwidth of 30, 40, and 50 kHz are small."

#sdrplay #sdrsharp #airspyhfplus

Hi everyone, I have a question you might be able to help me answer. I am looking to setup an SDR Network to share IQ from an AirSpy HF+ (when that arrives), a couple of RTL-SDR’s and a Lime SDR. So ro

#airspyhfplus