And select the packing option. That reduces the load on USB by about 1/3. {^_^}

Frequency? {o.o}

Sounds like you have not adjusted the respective front end gains correctly. {o.o}

A cool feature for recording would be to take a 200 kHz wide slice of spectrum and feed that out somewhat as is done in the various SDR servers. Then the uploads might not take two days and a excess o

30 seconds plus a button that saves the last 30 seconds to a file might be nice. {o.o}

Wires are inconvenient; but, they do remove some annoying potential problems. And if you are sitting at your ham station listening you're stuck there for your tuning knob so why no wired NOISE CANCELI

PK - for pure important communications or contesting the old Motorola police or utility radios are, well, designed for speech and if that kills "fidelity" "oh well." If you want easy listening for ext

Normally speaking a shared port would not communicate with each other but would both communicate with a third port. At least that is the way the lower level windows code is setup unless it has changed

Tools menu. Options. Take a tour. You will find all manner of interesting things including com port selections for various things. And your ideal source for help is, believe it or not, https://www.sdd

I would think they'd have different COM port numbers. Two things connected to the same COMn port would be the same as two terminals connected together with a 1:1 cable rather than a cable that twists

I am thinking in terms of communications between OmniRig and SDRC. Remember that you cannot open a com port and share it with multiple applications. So you cannot connect SDRC to the radio's comport a

With com0com or equivalent you get virtual cables that have two ends. If you try to open COM7 in SDRC and in OmniRig it's not going to work. Find the other end of COM7's virtual cable and have one of

SDRC is not designed to support side-by-side installations. A proper such design would not use the same registry and %apdata% folders for storing settings, thus making them truly independent of each o

#rtl

Bat pucky. {o.o}

#rtl

That is not even effective as all the registry and appdata settings will be shared. {o.o}

#rtl

He makes me think of a disheveled Mitt Romney - Lots of promise and a total fail when the rubber hits the road. {^_^}

More Attenuation. Experiment. It's good for you. You learn your equipment that way. {^_^}

I know nothing about VAC; but, looking at your picture of its settings panel the "Clock corr ratio" value raises the hairs on my neck a little. Is that "100.0000000" as in 100.0000000% or 100.0000000

Are you trying to use SDRConsole? It sounds like you are trying to use HDSDR. Damnifino how to make it work. Visit HDSDR based lists for that help. For help with SDRConsole this is the place. Despite

#hdsdr

Run the installer and accept defaults except for the question about installing for everybody or just the current user. Otherwise all warranties expressed or implied are void and you get to clean up th