Date   

Re: Console on ANAN 7000DLE MkII?

Mark Cayton <oldjackbob@...>
 

SDR Console is working fine with my 7000DLE MkII (static address 192.168.5.2), tied directly to my computer (no network switch, static address 192.168.5.1).
--
Mark  K1LSB


Re: RX-666 Testing

Bernard Malet
 

Ready to test if you wish


Re: RX-666 Testing

Simon Brown
 

OK,

 

Let me know when one arrives.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Bert Vierhout
Sent: 02 September 2020 09:12
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] RX-666 Testing

 

Hi Simon,

 

A week ago I have ordered rx-666 and rx-888 both. The rx-888 is on the way to me and will arrive soon. For the rx-666 not yet a message that it is send. I like to participate soon with the rx-888 if usefull for testing your beautiful program.

 

Best regards 

Bert

 

 

 

Verzonden vanaf mijn Samsung Galaxy-smartphone.

 

 

-------- Oorspronkelijk bericht --------

Van: Simon Brown <simon@...>

Datum: 01-09-2020 22:09 (GMT+01:00)

Aan: "SDR-Radio.com" <main@SDR-Radio.groups.io>

Onderwerp: [SDR-Radio] RX-666 Testing

 

Hi,

 

If anyone with a RX-666 would like to help with testing please:

 

 

It’s working well here with relatively low CPU load.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: RX-666 Testing

Bert Vierhout <bert.vierhout@...>
 

Hi Simon,

A week ago I have ordered rx-666 and rx-888 both. The rx-888 is on the way to me and will arrive soon. For the rx-666 not yet a message that it is send. I like to participate soon with the rx-888 if usefull for testing your beautiful program.

Best regards 
Bert



Verzonden vanaf mijn Samsung Galaxy-smartphone.


-------- Oorspronkelijk bericht --------
Van: Simon Brown <simon@...>
Datum: 01-09-2020 22:09 (GMT+01:00)
Aan: "SDR-Radio.com" <main@SDR-Radio.groups.io>
Onderwerp: [SDR-Radio] RX-666 Testing

Hi,

 

If anyone with a RX-666 would like to help with testing please:

 

 

It’s working well here with relatively low CPU load.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: RX-666 Testing

Simon Brown
 

Ah,

 

Shame, you’ll regret this. They may not be available in the future.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Bjarne Mjelde
Sent: 02 September 2020 05:35
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] RX-666 Testing

 

Hi Simon,
just sent my RX-666 back for a refund due to problems with the antenna connectors, sorry.

--
Bjarne Mjelde
arcticdx.blogspot.com
Remote receivers: 
arcticsdr.ddns.net:8073/
kongsdr.ddns.net:8074


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: RX-666 Testing

Simon Brown
 

Hi,

I should know that today.

Simon Brown, G4ELI
https://www.sdr-radio.com

-----Original Message-----
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Bob
Dengler
Sent: 01 September 2020 21:36
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] RX-666 Testing

At 9/1/2020 01:09 PM, you wrote:

Hi,

Â

If anyone with a RX-666 would like to help with testing please:

Â
* Join the forum:
<https://forum.sdr-radio.com:4499/app.php/new-users?sid=b15d90e17e3eb2fedfd7
b72a36a7c243>https://forum.sdr-radio.com:4499/app.php/new-users?sid=b15d90e1
7e3eb2fedfd7b72a36a7c243
* Apply to join the Test Team.
I have an RX-888 on order; will it work with that?

Bob NO6B







--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Console on ANAN 7000DLE MkII?

James Barber
 

Greetings, All.

I have a ANAN 7000DLE MkII and would like to try Console.
The radio is connected to a separate network card in the computer and uses APIPA (automatic) addressing - giving it a 169.254.xxx.xxx address.
That doesn't seem to work with Console.

I did hook the radio up to the network card on my main network, (192.168.1.xxx) and while it can find the radio there, the stream can't be copied, it sounds more like arc welding than white noise.
Any ideas?  I'm currently running OpenHPSDR Thetis, which works fine, but I'd like to try Console.

Thanks and 73,
Jim N7CXI


Re: RX-666 Testing

Bjarne Mjelde
 

Hi Simon,
just sent my RX-666 back for a refund due to problems with the antenna connectors, sorry.

--
Bjarne Mjelde
arcticdx.blogspot.com
Remote receivers: 
arcticsdr.ddns.net:8073/
kongsdr.ddns.net:8074


Re: RX-666 Testing

Bob Dengler
 

At 9/1/2020 01:09 PM, you wrote:

Hi,

Â

If anyone with a RX-666 would like to help with testing please:

Â
* Join the forum: <https://forum.sdr-radio.com:4499/app.php/new-users?sid=b15d90e17e3eb2fedfd7b72a36a7c243>https://forum.sdr-radio.com:4499/app.php/new-users?sid=b15d90e17e3eb2fedfd7b72a36a7c243
* Apply to join the Test Team.
I have an RX-888 on order; will it work with that?

Bob NO6B


RX-666 Testing

Simon Brown
 

Hi,

 

If anyone with a RX-666 would like to help with testing please:

 

 

It’s working well here with relatively low CPU load.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Pager Signals

Radioman ZeroZero
 

Last chance for pager signals.  Government is phasing them out next year for public services.
--
Thanks Steve M0ZEH


External Radio Transmit Track Rx ?

Hasan Schiers N0AN
 

SDRC is nearly the PERFECT program for working satellites. The only place it is lacking is when running an external radio, there is no provision for having the External Radio Transmitter and the Internal Radio Dongle Rx track when running satellites.

I have no idea how hard this would be, but if possible, I would love to see it added to SDRC.

What I"m looking for is if I have a standard pair of frequencies set so that I'm listening on 145.915 and transmitting on 435.290, AND my voice is in perfect tune ...

Should I need to move up to 145.925 to catch someone, ...when I do that, I would like the transmit VFO to properly track as I move the rx dial. In other words, the transmitter should move the tx vfo DOWN 10 KHz when I move the Rx VFO up 10 KHz to catch another qso.  (obviously not all birds are reverse, but all the Mode B ones are).

It would be nice if we could enter a "constant" for each satellite in the SatList > Current > Organize section, that reflects and would keep the Tracking of VFOs up and down in the right place as we move the receiver VFO.

Can this be done?
Is it difficult?
Simon, would you consider doing it?

What I do now is use math. If I''m already tuned in to my signal and I want to move, I note the rx freq, click where I want to go, then if I went up 10 on Rx, I tune down 10 on Tx and all is well. I can live with it.

But...auto-tracking would be soooo much nicer.

73, N0AN
Hasan


Re: CAT Control Question #cat

martin m3ghe
 

Value M5 is for SAM (synchronous AM, includes ECSS and AM)
You select which mode it defaults to in the mode mapping options in SDR-Console.
--
Martin m3ghe


Re: Log4OM, SDR-Radio, WSJT-X, Omni-rig

David Jackson
 

Use GridTracker and Cloudlog. Log over UDP / IP. CAT to WSJT-X from SDR-Console. Much easier.


Re: Log4OM, SDR-Radio, WSJT-X, Omni-rig

Jack D. Generaux
 

Thanks for replies -- got it to work by disabling the external radio and relying on a virtual serial port pair.


Re: How Do You Save an Identity, Then Load To Another Identity? #sdr-consolev3 #identity

Siegfried Jackstien
 

i would like to copy YOUR identity ... you live in a nice place and you know so much more as I do in programming ;-)

dg9bfc sigi

Am 31.08.2020 um 05:50 schrieb Simon Brown:

In fact the registry info isn’t needed!

 

In practice I can support an unlimited number of identities, I just show a maximum of 9.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown via groups.io
Sent: 31 August 2020 06:43
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] How Do You Save an Identity, Then Load To Another Identity? #sdr-consolev3 #identity

 

Programmers never retire, they just decompile 😊 .

 

Moving / copying identities would not be too hard, it’s a case of copying files and a registry tree.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of jdow
Sent: 31 August 2020 05:58
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] How Do You Save an Identity, Then Load To Another Identity? #sdr-consolev3 #identity

 

I do not think this could be done without a lot of work. (I could "probably" facilitate this with some work with C++ and Visual Studio; but, I lack the incentive. And it would be on a basis of, "If something breaks you get to keep all the pieces.") Half of it would be easy. The other half requires registry hacking. The registry hacking is complicated by the lack of an explicit rename ability in C++. It has to be done with a delete key on the new key name and then copy the existing key and all its values to the new key name. Since this wipes out any data that might have existed in the new key name - well, you get to keep the pieces. There are some other places that need to be doctored. Getting them all may be dicey. I can see the utility of such a too; but, my usual motivation is, "Do I need this?" (That is to say, "I am retired.")

{^_^}

On 20200830 21:05:58, Tomas, NW7US wrote:

I would like to save my Main identity (with all of my virtual radios and so on), so that I could later load that saved identity into one of the four alternative.  That way I could change the Main identity and still have the saved one loaded into an alternative identity.  Is that possible?  Can an entire identity be copied to a new identity?

Thanks for your help,

73 de NW7US dit dit
+ Check out my SDRplay RSPdx on http://www.sdrspace.com/Version-3
SKCC Nr. 4758s / FISTS Nr. 7055 / LICW Nr. 653 
NW7US on QRZ / NW7US on YouTubeTwitterFacebookBlog
Space weather and radio propagation editor for 
      - CQ Amateur Radio Magazine, and,
      - The Spectrum Monitor magazine. 
..

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Log4OM, SDR-Radio, WSJT-X, Omni-rig

martin m3ghe
 

I run an external radio via Omni-rig no problem and another program via the CAT controller section all usually runs fine.
Sometimes I get a similar problem to you when using a VSP for the connection. I have to reset the virtual pair and it works again.
If you are using a VSP I suggest you try that.

--
Martin m3ghe


Re: Log4OM, SDR-Radio, WSJT-X, Omni-rig

martin m3ghe
 

On Sun, Aug 30, 2020 at 09:13 PM, Jack D. Generaux wrote:
Log4OM manual
I don't use Log4OM but surely it's connection to SDR Console should be through the CAT controller section and not through Omni-rig.

--
Martin m3ghe


Re: How Do You Save an Identity, Then Load To Another Identity? #sdr-consolev3 #identity

jdow
 

The page layouts are in the registry. That would be nice to save. At least I'd want that.
{o.o}

On 20200830 22:50:12, Simon Brown wrote:

In fact the registry info isn’t needed!

 

In practice I can support an unlimited number of identities, I just show a maximum of 9.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Simon Brown via groups.io
Sent: 31 August 2020 06:43
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] How Do You Save an Identity, Then Load To Another Identity? #sdr-consolev3 #identity

 

Programmers never retire, they just decompile 😊 .

 

Moving / copying identities would not be too hard, it’s a case of copying files and a registry tree.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of jdow
Sent: 31 August 2020 05:58
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] How Do You Save an Identity, Then Load To Another Identity? #sdr-consolev3 #identity

 

I do not think this could be done without a lot of work. (I could "probably" facilitate this with some work with C++ and Visual Studio; but, I lack the incentive. And it would be on a basis of, "If something breaks you get to keep all the pieces.") Half of it would be easy. The other half requires registry hacking. The registry hacking is complicated by the lack of an explicit rename ability in C++. It has to be done with a delete key on the new key name and then copy the existing key and all its values to the new key name. Since this wipes out any data that might have existed in the new key name - well, you get to keep the pieces. There are some other places that need to be doctored. Getting them all may be dicey. I can see the utility of such a too; but, my usual motivation is, "Do I need this?" (That is to say, "I am retired.")

{^_^}

On 20200830 21:05:58, Tomas, NW7US wrote:

I would like to save my Main identity (with all of my virtual radios and so on), so that I could later load that saved identity into one of the four alternative.  That way I could change the Main identity and still have the saved one loaded into an alternative identity.  Is that possible?  Can an entire identity be copied to a new identity?

Thanks for your help,

73 de NW7US dit dit
+ Check out my SDRplay RSPdx on http://www.sdrspace.com/Version-3
SKCC Nr. 4758s / FISTS Nr. 7055 / LICW Nr. 653 
NW7US on QRZ / NW7US on YouTubeTwitterFacebookBlog
Space weather and radio propagation editor for 
      - CQ Amateur Radio Magazine, and,
      - The Spectrum Monitor magazine. 
..

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: How Do You Save an Identity, Then Load To Another Identity? #sdr-consolev3 #identity

jdow
 

I noticed a few other places that seem to be tied into the issue. Getting them all without the benefit of knowing the inwards of SDRC would be "risky". (And John Williams (Star Wars) will never die, he will decompose.)

{O.o}

On 20200830 22:43:20, Simon Brown wrote:

Programmers never retire, they just decompile 😊 .

 

Moving / copying identities would not be too hard, it’s a case of copying files and a registry tree.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of jdow
Sent: 31 August 2020 05:58
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] How Do You Save an Identity, Then Load To Another Identity? #sdr-consolev3 #identity

 

I do not think this could be done without a lot of work. (I could "probably" facilitate this with some work with C++ and Visual Studio; but, I lack the incentive. And it would be on a basis of, "If something breaks you get to keep all the pieces.") Half of it would be easy. The other half requires registry hacking. The registry hacking is complicated by the lack of an explicit rename ability in C++. It has to be done with a delete key on the new key name and then copy the existing key and all its values to the new key name. Since this wipes out any data that might have existed in the new key name - well, you get to keep the pieces. There are some other places that need to be doctored. Getting them all may be dicey. I can see the utility of such a too; but, my usual motivation is, "Do I need this?" (That is to say, "I am retired.")

{^_^}

On 20200830 21:05:58, Tomas, NW7US wrote:

I would like to save my Main identity (with all of my virtual radios and so on), so that I could later load that saved identity into one of the four alternative.  That way I could change the Main identity and still have the saved one loaded into an alternative identity.  Is that possible?  Can an entire identity be copied to a new identity?

Thanks for your help,

73 de NW7US dit dit
+ Check out my SDRplay RSPdx on http://www.sdrspace.com/Version-3
SKCC Nr. 4758s / FISTS Nr. 7055 / LICW Nr. 653 
NW7US on QRZ / NW7US on YouTubeTwitterFacebookBlog
Space weather and radio propagation editor for 
      - CQ Amateur Radio Magazine, and,
      - The Spectrum Monitor magazine. 
..

 


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

9861 - 9880 of 69391