|
Re: 3.0.26
Hello Bob,
toggle quoted messageShow quoted text
Yes, that is an option. Indeed I use SDR# but it is not that efficient. Optimal would be to have the network protocol that was included in SDRC Version 1. I do understand, though, this is a feature for few people. I'm not sure if extra food for the dog can help... ---------------------- 73 de Max, N5NHJ (I8NHJ) Monday, December 14, 2020, 4:07:04 PM, you wrote:
At 12/14/2020 11:32 AM, you wrote:Hello Bob, OK I see. SDRC has a "data repeater" that makes the raw I-Q samples available programmatically via a DLL, but I guess MP65 can't use that. So you need something like what SDR# or HDSDR offers, a "raw" I-Q output to the audio output. Bob NO6B
|
||||
|
|
||||
|
Re: 3.0.26
Bob Dengler
At 12/14/2020 11:32 AM, you wrote:
Hello Bob,OK I see. SDRC has a "data repeater" that makes the raw I-Q samples available programmatically via a DLL, but I guess MP65 can't use that. So you need something like what SDR# or HDSDR offers, a "raw" I-Q output to the audio output. Bob NO6B
|
||||
|
|
||||
|
Re: 3.0.26
Siegfried Jackstien
and pluto works superb even an slow machines ... grin dg9bfc sigi ps since a few (test) versíons cpu load seems a bit higher ...
any idea?? Am 14.12.2020 um 18:10 schrieb Simon
Brown:
|
||||
|
|
||||
|
Re: 3.0.26
Hello Bob,
toggle quoted messageShow quoted text
MAP65 doesn't accept the audio output from the audio card, so it isn't just about BW. It works with IQ data, either from a sound card or through the network. ---------------------- 73 de Max, N5NHJ (I8NHJ) Monday, December 14, 2020, 1:05:35 PM, you wrote:
At 12/14/2020 10:15 AM, you wrote:Hi Simon, How much BW does it need? I've used VACs at ~90 kHz BW (192 kHz sampling) no problem. Bob NO6B
|
||||
|
|
||||
|
Re: 3.0.26
Hello Simon,
toggle quoted messageShow quoted text
MAP65 reads any signal in a 90 kHz window and creates a kind of band map of everything decoded, you don't need to be on the exact frequency to decode. ---------------------- 73 de Max, N5NHJ (I8NHJ) Monday, December 14, 2020, 12:09:58 PM, you wrote:
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of DL6SH Slawek
Sent: 14 December 2020 16:00 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] 3.0.26 Hello Simon, nice to see a new version. Unfortunatelly I have not seen any feedback to MAP65 Interface..... Any plans? TNX es 73, Slawek dl6sh Am 14.12.2020 um 16:26 schrieb Jempi ( ON7MA ):
-- - + - + - Please use https://forumsdr-radio.com:4499/ when posting questions or problems.
|
||||
|
|
||||
|
Re: 3.0.26
Bob Dengler
At 12/14/2020 10:15 AM, you wrote:
Hi Simon,How much BW does it need? I've used VACs at ~90 kHz BW (192 kHz sampling) no problem. Bob NO6B
|
||||
|
|
||||
|
Re: 3.0.26
DL6SH Slawek
Hi Simon,
would be really nice in actuall
version!
73, Slawek, dl6sh
Am 14.12.2020 um 19:22 schrieb Simon
Brown:
|
||||
|
|
||||
|
Re: 3.0.26
Simon Brown
Hi,
It is possible – I did it in version 1.
Simon Brown, G4ELI https://www.sdr-radio.com
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of DL6SH Slawek
Sent: 14 December 2020 18:15 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] 3.0.26
Hi Simon,
ok thank you.
VAC does not work with proper bandwith.
With Linrad I am not happy.
If not possible, forget it.
73, Slawek, dl6sh
Am 14.12.2020 um 19:09 schrieb Simon Brown:
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
||||
|
|
||||
|
Re: 3.0.26
Peter 1956
In action with RDS Spy!
https://youtu.be/embVmjyX35Q Peter Wilson
|
||||
|
|
||||
|
Re: 3.0.26
DL6SH Slawek
Hi Simon,
ok thank you.
VAC does not work with proper bandwith.
With Linrad I am not happy.
If not possible, forget it.
73, Slawek, dl6sh
Am 14.12.2020 um 19:09 schrieb Simon
Brown:
|
||||
|
|
||||
|
Re: 3.0.26
Simon Brown
Maybe,
But I do support Pluto.
Simon Brown, G4ELI https://www.sdr-radio.com
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Jempi ( ON7MA )
Sent: 14 December 2020 15:26 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] 3.0.26
Tnx Simon, Good XMas to U and the family -- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
||||
|
|
||||
|
Re: problem on init of rtl-sdr
Simon Brown
Please post this problem in the new forums (URL) below and add screenshots.
Simon Brown, G4ELI https://www.sdr-radio.com
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Oguzhan Kayhan
Sent: 14 December 2020 17:10 To: SDR-Radio@groups.io Subject: [SDR-Radio] problem on init of rtl-sdr
Hello Simon I am not sure if this was discussed before. This is what happens. When I start the console, if the frequency is with offset (for oscar-100 rx) my waterfall has no visible signals even if it is set to the correct frequency.(there is white noise present) When I change the frequency to something else and return back to the first frequency, everything works. I recorded a screen capture at https://yadi.sk/d/sz8KuHXGRdksww In the first seconds, it is not visible but I am selecting rtl-srd radio.. Then you will see a spectrum without any signals after I change the frequency.
Regards de TA2NC
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
||||
|
|
||||
|
Re: 3.0.26
Simon Brown
I ran out of time. I must contact Lief; the interface doesn’t seem to be documented.
Why not use WSJT and a VAC?
Simon Brown, G4ELI https://www.sdr-radio.com
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of DL6SH Slawek
Sent: 14 December 2020 16:00 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] 3.0.26
Hello Simon,
nice to see a new version.
Unfortunatelly I have not seen any feedback to MAP65 Interface..... Any plans?
TNX es 73, Slawek dl6sh
Am 14.12.2020 um 16:26 schrieb Jempi ( ON7MA ):
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
||||
|
|
||||
|
Re: 3.0.26
N2MS
Simon,
Thanks for the effort, especially the support for the RX-888. I enjoy viewing a wide spectrum and this SDR, along with your great software provides this ability.
For those considering the RX-888 it consumes lots of current so I would recommend connecting it directly to a USB-3 port. I tried to measure the current with USB power meter and the combination of additional connections and a current shunt caused erratic operation of the RX-888.
I sent some funds for Christmas cookies for you and your dog.
73 Mike N2MS
|
||||
|
|
||||
|
Re: 3.0.26
EA7HGL
Muchas gracias por tu trabajo y esfuerzo. Que el próximo año te vaya todo bien.
Antonio D. (EA7HGL)
|
||||
|
|
||||
|
problem on init of rtl-sdr
Oguzhan Kayhan
Hello Simon I am not sure if this was discussed before. This is what happens. When I start the console, if the frequency is with offset (for oscar-100 rx) my waterfall has no visible signals even if it is set to the correct frequency.(there is white noise present) When I change the frequency to something else and return back to the first frequency, everything works. I recorded a screen capture at https://yadi.sk/d/sz8KuHXGRdksww In the first seconds, it is not visible but I am selecting rtl-srd radio.. Then you will see a spectrum without any signals after I change the frequency. Regards de TA2NC
|
||||
|
|
||||
|
Re: 3.0.26
DL6SH Slawek
Hello Simon,
nice to see a new version.
Unfortunatelly I have not seen any
feedback to MAP65 Interface.....
Any plans?
TNX es 73, Slawek dl6sh
Am 14.12.2020 um 16:26 schrieb Jempi (
ON7MA ):
Tnx Simon, Good XMas to U and the family
|
||||
|
|
||||
|
Re: 3.0.26
Tnx Simon, Good XMas to U and the family
Still sorry to see no support for HackRF TX :-( When onde day U should have the time ? Tnx JP
|
||||
|
|
||||
|
Re: Elad S3 and optional filters
Francesco Di Giovanni
Thank you Simon.
Excellent job! 73 Francesco, IN3XZP
|
||||
|
|
||||
|
3.0.26
Simon Brown
Version 3.0.26 of SDR Console now available in time for the holidays: https://forum.sdr-radio.com:4499/viewtopic.php?f=66&t=604
Simon Brown, G4ELI https://www.sdr-radio.com
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
||||
|
|