GA Simon as I have already asked a lot ;-)))
I had only to wait till someone had ask for a manual notch and its interface.
Here it is on the CiaoRadio SDR, look at the pics I uploaded
http://groups.yahoo.com/group/sdr-radio-com/photos/album/1050649225/pic/382031468/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc

http://groups.yahoo.com/group/sdr-radio-com/photos/album/1050649225/pic/1953948852/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc

http://groups.yahoo.com/group/sdr-radio-com/photos/album/1050649225/pic/1884090808/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc

The manual notch in the CiaoRadio SDR works so: in the filter window just click with the rigth mouse key over the interfering signal (here 3 times) and I have perfect notches.
More if I drag right mouse over one or more of the already notches on the bottom part the notch becomes wider, so wide that all the filter is notched!
To remove the nochtes simply put the mouse on the upper part of the filter window and drag left to righ or viceversa and the filter window is again clean on notches.
Hope The explanation will suffice eh hehehe.

The other two pics show how is possible to get just the spectrum uppper part viewable simply by dragging the mouse from one of the below corners toward upper ones.
This way I\We will have much more free space on out LITTLE_Monitors.

I was just waiting the good occasion to let you know that.
Eh hehehe,.
73
Phil


--- In sdr-radio-com@..., "Simon HB9DRV" <simon@...> wrote:

Also I don't have a good interface yet for actually setting the manual notch
- any suggestions?



Simon Brown, HB9DRV

http://sdr-radio.com



From: sdr-radio-com@... [mailto:sdr-radio-com@...]
On Behalf Of Simon HB9DRV

I'll add auto-notches initially then add manual notches as well. I haven't
yet decided on the right filtering to use for a notch - FIR or FFT, I'll
have to look at this. Using FIR will introduce extra latency which will
become an issue with TX support, so maybe FFT filtering.

Also I don't have a good interface yet for actually setting the manual notch
- any suggestions?



Simon Brown, HB9DRV

http://sdr-radio.com



From: sdr-radio-com@... [mailto:sdr-radio-com@...]
On Behalf Of Simon HB9DRV

I'll add auto-notches initially then add manual notches as well. I haven't
yet decided on the right filtering to use for a notch - FIR or FFT, I'll
have to look at this. Using FIR will introduce extra latency which will
become an issue with TX support, so maybe FFT filtering.

Also I don't have a good interface yet for actually setting the manual notch
- any suggestions?



Simon Brown, HB9DRV

http://sdr-radio.com



From: sdr-radio-com@... [mailto:sdr-radio-com@...]
On Behalf Of Simon HB9DRV

I'll add auto-notches initially then add manual notches as well. I haven't
yet decided on the right filtering to use for a notch - FIR or FFT, I'll
have to look at this. Using FIR will introduce extra latency which will
become an issue with TX support, so maybe FFT filtering.

I am feeding the IF output from my K3 into a SoftrockLite and then using a computer running XP SP3 for Simon's V1.1 Build 360 #2.

I would like to correspond *OFFLIST*
with anyone else using a similar setup.

Hi,



Please - what mode are you using with the FT-1000? I seem to remember that
there is some unique logic in the FT-1000 regarding frequency display.



When I get the HF Radio integration working properly you will be able to
compensate for these offsets.



Simon Brown, HB9DRV

http://sdr-radio.com



From: sdr-radio-com@... [mailto:sdr-radio-com@...]
On Behalf Of ic8pof



Having used the SDR_IQ beside my SUPER FIELD for a while I have noted that
changing the bands from one
to another the SDR_IQ is always OFF_tune even 1000Hz apart the FIELD's
tuning scale.
So it is a must to recalibrate to keep the 2 units iso-freq.

Two options are still necessary to the above function:

1) 500Hz move + and - ,
2) some sort of memory, one per band, so that when I&#92;We go back from one
band to another the calibration follows the band tuned.

Even because when Simon will add the RIG support to the Console the tuning
scales would need anyway to be resynchronized .

GN Simon just discovered the external resizable S meter.
Fine option again.
73
Phil