Date   

Re: Another Day, ... 408

ic8pof
 

GE, remember to inhibit the mouse tuning in the blue bar below fine tuning.
Often when changing the spectrum window width if clicking with the mouse over the blue bar below the fine tuning it moves the actual channel.
73
Phil@IC8POF

--- In sdr-radio-com@..., "Simon HB9DRV" <simon@...> wrote:

Ah,



Thanks - am actually working in the tuning bar area this evening as there's
a bug lurking down there.



Simon Brown, HB9DRV

http://sdr-radio.com



From: sdr-radio-com@... [mailto:sdr-radio-com@...]
On Behalf Of Cal Latham
Sent: 09 September 2010 17:30
To: sdr-radio-com@...
Subject: Re: [sdr-radio-com] Another Day, ... 408





Woof Woof! 408 runs here fine. The horizontal scroll bar on the bottom
is still kind of weird. If you put your mouse on it and press it down it
jumps freq. and then goes back to where you can move the range up or down in
freq. It looks like you made it to show the width of the spread of the
display.....



Add a buglette....Smoothing value not remembered in Spectrum Scope when
SDR is closed and reopened.



Love those biscuitsParty smile emoticon



All the Best
Cal, W1HHO
Fraternity Village ME.



From: Simon HB9DRV <mailto:simon@...>

Sent: Thursday, September 09, 2010 05:51

To: sdr-radio-com@...

Subject: [sdr-radio-com] Another Day, ... 408





... another dog-biscuit !

Build 408 which fixes some crashes, adds a few little tweaks etc. is
available.

http://www.ham-radio.ch/kits/sdr-radio.com/InternalOnly/SDR-RADIO_v1.1b408.e
xe

Simon Brown, HB9DRV

http://sdr-radio.com


Scheduled recording tuning problem

Giampiero Bernardini
 

Ciao,

I have a problem with scheduled recording.

 

When I try to schedule an IQ recording session, my SDR-radio (also 408) starts to record at the wanted time but it doesn’t tune the receiver on the wanted frequency. It record only on/around the current frequency.

 

(The recording starts only if the SDR-Radio is on, instead with Spectravue the rec starts even if it is on stop)

 

I used the Calendar procedure. Did I forget some trick?

 

XP - 1,6 GHz Pentium dual core – SDR-14

 

Thank you

Giampiero

 

Giampiero Bernardini

Avvenire

Milano


Re: Another Day, ... 408

Simon HB9DRV <simon@...>
 

Ah,

 

Thanks - am actually working in the tuning bar area this evening as there's a bug lurking down there.

 

Simon Brown, HB9DRV

http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of Cal Latham
Sent: 09 September 2010 17:30
To: sdr-radio-com@...
Subject: Re: [sdr-radio-com] Another Day, ... 408

 

 

    Woof Woof! 408 runs here fine. The horizontal scroll bar on the bottom is still kind of weird. If you put your mouse on it and press it down it jumps freq. and then goes back to where you can move the range up or down in freq. It looks like you made it to show the width of the spread of the display.....

 

    Add a buglette....Smoothing value not remembered in Spectrum Scope when SDR is closed and reopened. 

    

    Love those biscuits

 

         All the Best
         Cal, W1HHO
     Fraternity Village ME.

 

From: Simon HB9DRV

Sent: Thursday, September 09, 2010 05:51

Subject: [sdr-radio-com] Another Day, ... 408

 

 

... another dog-biscuit !

Build 408 which fixes some crashes, adds a few little tweaks etc. is available.

http://www.ham-radio.ch/kits/sdr-radio.com/InternalOnly/SDR-RADIO_v1.1b408.exe

Simon Brown, HB9DRV

http://sdr-radio.com


Re: Another Day, ... 408

Calder Latham
 

    Woof Woof! 408 runs here fine. The horizontal scroll bar on the bottom is still kind of weird. If you put your mouse on it and press it down it jumps freq. and then goes back to where you can move the range up or down in freq. It looks like you made it to show the width of the spread of the display.....
 
    Add a buglette....Smoothing value not remembered in Spectrum Scope when SDR is closed and reopened. 
    
    Love those biscuits
 
         All the Best
         Cal, W1HHO
     Fraternity Village ME.

Sent: Thursday, September 09, 2010 05:51
Subject: [sdr-radio-com] Another Day, ... 408

 

... another dog-biscuit !

Build 408 which fixes some crashes, adds a few little tweaks etc. is available.

http://www.ham-radio.ch/kits/sdr-radio.com/InternalOnly/SDR-RADIO_v1.1b408.exe

Simon Brown, HB9DRV

http://sdr-radio.com


Another Day, ... 408

Simon HB9DRV <simon@...>
 

... another dog-biscuit !

 

Build 408 which fixes some crashes, adds a few little tweaks etc. is available.

 

http://www.ham-radio.ch/kits/sdr-radio.com/InternalOnly/SDR-RADIO_v1.1b408.exe

 

Simon Brown, HB9DRV

http://sdr-radio.com

 


Re: SDR Console does'nt play my recording wave files ...

Simon HB9DRV <simon@...>
 

Hi,

 

I've been working on this, it will be OK in the next kit and also supports SpectraVue.

 

For 'commercial' reasons I do not support Perseus - for now.

 

Simon Brown, HB9DRV

http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of boxkey3
Sent: 09 September 2010 10:07
To: sdr-radio-com@...
Subject: [sdr-radio-com] SDR Console does'nt play my recording wave files ...

 

 

Hello,

I try to play wav files but not recording by this software.
When i check the files tools > program options > Waves files
the answer is ok

But when i select input source > Playing IQ file i select the file
nothing appear in the window below and play button stay grey.

What i have forget to make ?

Your idea and help are welcome
Thanks by advance
Sincerely

Michel F5OZF


SDR Console does'nt play my recording wave files ...

Michel Trias
 

Hello,

I try to play wav files but not recording by this software.
When i check the files tools > program options > Waves files
the answer is ok

But when i select input source > Playing IQ file i select the file
nothing appear in the window below and play button stay grey.

What i have forget to make ?

Your idea and help are welcome
Thanks by advance
Sincerely

Michel F5OZF


Re: Waterfall "Automatic colour scaling"

Mark &#92;(G4PCS&#92;) <g4pcs@...>
 

>> "Any chance the show/hide state of the "Ribbon" can be stored between invocations please?"

oops sorry, I think this already works under normal circumstances. I was mislead by an "abnormal" program exit during testing :)

Mark


From: Mark (G4PCS)
To: sdr-radio-com@...
Sent: Thursday, 9 September, 2010 8:52:44
Subject: [sdr-radio-com] Waterfall "Automatic colour scaling"

 

A couple of comments on build 404...

I'd like to turn off the waterfall's automatic colour scaling (I don't like the way the "colour agc" works every time a signal appears, I'd rather it just stayed constant). I can see the button to deselect auto scaling in the settings, but once turned off how do I adjust the range manually, since clip & gain are disabled with Auto turned off? I'm sure I *used* to be able to do it... A feature I'd like to see is a one-shot auto scale, which works really well in spectravue.

When playing back an IQ data file, it'd be useful if the waterfall/spectrum could be automatically adjusted to the bandwidth of the data file (and centred appropriately). At the moment it takes a bit of faffing to sort it out every time a file is played :)

Any chance the show/hide state of the "Ribbon" can be stored between invocations please?

Generally, getting better and better - congrats Simon :D

73, Mark G4PCS



Waterfall "Automatic colour scaling"

Mark &#92;(G4PCS&#92;) <g4pcs@...>
 

A couple of comments on build 404...

I'd like to turn off the waterfall's automatic colour scaling (I don't like the way the "colour agc" works every time a signal appears, I'd rather it just stayed constant). I can see the button to deselect auto scaling in the settings, but once turned off how do I adjust the range manually, since clip & gain are disabled with Auto turned off? I'm sure I *used* to be able to do it... A feature I'd like to see is a one-shot auto scale, which works really well in spectravue.

When playing back an IQ data file, it'd be useful if the waterfall/spectrum could be automatically adjusted to the bandwidth of the data file (and centred appropriately). At the moment it takes a bit of faffing to sort it out every time a file is played :)

Any chance the show/hide state of the "Ribbon" can be stored between invocations please?

Generally, getting better and better - congrats Simon :D

73, Mark G4PCS



Re: No Audio via web server

Alan <alan4alan@...>
 

----- Original Message -----
From: "Andrew"
Subject: [sdr-radio-com] No Audio via web server



Question is what am I missing I can't recieve any audio via the web server on some of the remote radios I tried.
I also asked some of the local hams to try my sdr via the website but no audio.
If somebody connects to me using sdr radio software with Ip and password etc it works no problem.
Nobody has ever answered, this has been mentioned several times. I have had my Softrock on for months, no-one has ever successfully connected via the web application. I've never connected to anyone that way. I have wondered if it does not select the correct soundcard.

73 Alan G4ZFQ


No Audio via web server

Andrew <gm0udl@...>
 

Hello All,

Impressed with the newer version on the software Simon.
Like the new tuning via scroll mouse on second screen better waterfall etc.
It has made me use my sdr for recieving as well as using it as a panadapter hooked up to the 2000.
Waiting for rig support for my FT2000.


Question is what am I missing I can't recieve any audio via the web server on some of the remote radios I tried.
I also asked some of the local hams to try my sdr via the website but no audio.
If somebody connects to me using sdr radio software with Ip and password etc it works no problem.

Ideas..
Also if anybody wants to use my sdr for any testing I may be able to help with the various antennas here from 160 to 10m, send an e-mail..
Andrew GM0UDL


Re: Console filter width , bug or reality ?

Simon HB9DRV <simon@...>
 

Hi,

 

I can understand that - a filter width of 380Hz is OK. Also I will (hopefully) be improving my RTTY decoder while on holiday. I know what I want to do, just need to do it.

 

Also a 250Hz crystal filter will be much wider than a 250Hz digital FIR filter. If this is the K3 filter then you'll find it's actually ~ 350Hz or so.

 

Simon Brown, HB9DRV

http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of ic8pof
Sent: 08 September 2010 21:14
To: sdr-radio-com@...
Subject: [sdr-radio-com] Console filter width , bug or reality ?

 

 

GE Simon and All.
Just playing in the shack for more tests with the sdr-iq.
In the pic below is shown in parallel MMTTY audio from my rig with the narrow 250hz filter in rtty\lsb and the sdr-iq via the 2nd IF to the DataDecoder. Both work OK.
A strange thing: cannot tighten the sdr-iq filter below 370\380hz even if RTTY shift is at 170hz otherwise the DD does not decode anymore.

What happens ?

http://groups.yahoo.com/group/sdr-radio-com/photos/album/1050649225/pic/342550827/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc

73
Phil@ic8pof


Console filter width , bug or reality ?

ic8pof
 

GE Simon and All.
Just playing in the shack for more tests with the sdr-iq.
In the pic below is shown in parallel MMTTY audio from my rig with the narrow 250hz filter in rtty&#92;lsb and the sdr-iq via the 2nd IF to the DataDecoder. Both work OK.
A strange thing: cannot tighten the sdr-iq filter below 370&#92;380hz even if RTTY shift is at 170hz otherwise the DD does not decode anymore.

What happens ?

http://groups.yahoo.com/group/sdr-radio-com/photos/album/1050649225/pic/342550827/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc

73
Phil@ic8pof


Re: IF2000 WITH MY YAESU FT950

Simon HB9DRV <simon@...>
 

Hi,

 

This work will resume after I get back from holiday in October. It will only be available when it works and works properly :)

 

Simon Brown, HB9DRV

http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of ea8ay@...
Sent: 08 September 2010 14:31
To: sdr-radio-com@...
Subject: [sdr-radio-com] IF2000 WITH MY YAESU FT950

 

 

Simon first congratulations for fantastic work!! Hey I´m waiting for use my sdr with my if2000 and ft950....regards!!


Re: IF2000 WITH MY YAESU FT950

aborg <a_borg@...>
 

I thought the " IF Version" softrock lite II kit was the easy solution for the Yaesu FT-950 ?

Mike-KK4MS
a_borg@...


--- On Wed, 9/8/10, terry_genes wrote:

From: terry_genes
Subject: [sdr-radio-com] Re: IF2000 WITH MY YAESU FT950
To: sdr-radio-com@...
Date: Wednesday, September 8, 2010, 11:13 AM

 



--- In sdr-radio-com@..., ea8ay@... wrote:
>
> Simon first congratulations for fantastic work!! Hey I´m waiting for use my sdr with my if2000 and ft950....regards!!
>

Quiet a few of us would like to see rig integration for Yaesu and others brands to make the SDR more user friendly for Radio Hams but for now we have to wait until Simon gets round to it - It is all a matter of Simons priorities.

Terry G4POP



Re: IF2000 WITH MY YAESU FT950

terry_genes <tgenes@...>
 

--- In sdr-radio-com@..., ea8ay@... wrote:

Simon first congratulations for fantastic work!! Hey I´m waiting for use my sdr with my if2000 and ft950....regards!!
Quiet a few of us would like to see rig integration for Yaesu and others brands to make the SDR more user friendly for Radio Hams but for now we have to wait until Simon gets round to it - It is all a matter of Simons priorities.

Terry G4POP


IF2000 WITH MY YAESU FT950

ea8ay@...
 

Simon first congratulations for fantastic work!! Hey I´m waiting for use my sdr with my if2000 and ft950....regards!!


Re: Name Suggestion

steve_m0zeh <hsdx@...>
 

My name suggestion is KUDOS
Steve-M0ZEH


Re: Build 404 - AM & FM fixed

Simon HB9DRV <simon@...>
 

Good news, I would like a TS-590, don't forget my FTDX-5000 (with 300Hz filter) please :)

 

Until then I'll just get on with the bug-fixing, next kit'll probably be tomorrow or so...

 

Simon Brown, HB9DRV

http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of RFSPACE

 

I am not sure if there will be a good way of extracting a wide IF on the TS-590S. I have one on order so will know soon. It is my understanding that the IF is in the 11 MHz range and always the same. If there is easy access, then I might make a board for it. There is nothing on TX side from our end yet.

 


Re: Build 404 - AM & FM fixed

RFSPACE
 

Hi,
 
I am not sure if there will be a good way of extracting a wide IF on the TS-590S. I have one on order so will know soon. It is my understanding that the IF is in the 11 MHz range and always the same. If there is easy access, then I might make a board for it. There is nothing on TX side from our end yet.
 
 
Pieter
 

----- Original Message -----
Sent: Tuesday, September 07, 2010 5:13 AM
Subject: RE: [sdr-radio-com] Build 404 - AM & FM fixed

 

Hi,

The TS-590S may be a problem so wait until we do know more about this radio.

SDR transmitter from Pieter? You'll have to wait for an official announcement from him, for only he knows what he's doing ;)

Simon Brown, HB9DRV

http://sdr-radio.com

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of David Messing

My wife K0INA and I were at Dayton this year and when you received the award,  I was pleased for you.  I also saw the TS-590 and we have been waiting for its arrival.  Since then you commented of seeing it at a hamfest.  Yesterday you commented about adding that radio  to the software.  Does this mean the Kenwood TS590 looks promising for SDR use with RF Space radios and your software???  

I also spoke with Pieter and I got a feeling he may be leaning toward a transmitter option.  If that is the case, I will wait a longer.  SDR link to operating is going to be my path.