I also like the new "semi-auto" one-click waterfall gain setting.

But would it be possible to make this button very accessible, like in Spectravue?
May be simply a left or right mouse click on the spectrum?

73
Paul
PD0PSB

--- In sdr-radio-com@..., "ic8pof" wrote:
>
> GE Simon.
> Pieter is a Pro I am just End_User_Home_Button_Depresser_Ham.
> Yes pleaseeeeeee a speed control is a must.
> Even over local LAN.
> Not much faster but little more, say 2 to 3 times than now.
> Via sliding cursor of course.
> I have tried to move the resolution but nothing happens to the speed.
>
> Anyway I would suggest to put the manual contrast sliding-bar directly to the right-mouse of the VFO bar.
> Instead or with the window width.
> That is because the noise specially on 160mt changes rapidly and going into the RXOptions take always time.
>
> 73
> Phil@IC8POF
>
>
> --- In sdr-radio-com@..., "Simon HB9DRV" wrote:
> >
> > Hi Phil,
> >
> >
> >
> > The Waterfall speed has been replaced with Resolution (at Pieter's request),
> > this is the way professional SDR software is presented. For faster waterfall
> > use lower resolution.
> >
> >
> >
> > If you want a faster waterfall using the remote server on your own network
> > let me know, I can extend this if needed.
> >
> >
> >
> > Blame Pieter :-)
> >
> >
> >
> > Simon Brown, HB9DRV, http://sdr-radio.com
> >
> >
> >
> > From: sdr-radio-com@... [mailto:sdr-radio-com@...]
> > On Behalf Of ic8pof
> > Sent: 02 December 2010 19:18
> > To: sdr-radio-com@...
> > Subject: [sdr-radio-com] b492 WaterFall speed lacks ?
> >
> >
> >
> >
> >
> > GE SImon and All.
> > Till now the console b492 works on my "ol"AMDs.
> > But cannot find a speed control for the WaterFall. It is too slow now.
> > Still using the b472 server.
> > 73
> > Phil@IC8POF
> >
>

 

I thought the SDR-30 was still a secret?

 

Simon Brown, HB9DRV, http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of RFSPACE

 

I will have to send you an IQ recording that I did a few days ago that is 30 MHz wide at 16 bit IQ. See if it opens :)

 

Phil,

The resolution slider is the speed control. If it is not changing then something is wrong. The resolution changes the FFT size which affects the speed. 

Pieter

Sent from my iPhone 4

On Dec 2, 2010, at 1:47 PM, "ic8pof" <ic8pof@...> wrote:

 

GE Simon.
Pieter is a Pro I am just End_User_Home_Button_Depresser_Ham.
Yes pleaseeeeeee a speed control is a must.
Even over local LAN.
Not much faster but little more, say 2 to 3 times than now.
Via sliding cursor of course.
I have tried to move the resolution but nothing happens to the speed.

Anyway I would suggest to put the manual contrast sliding-bar directly to the right-mouse of the VFO bar.
Instead or with the window width.
That is because the noise specially on 160mt changes rapidly and going into the RXOptions take always time.

73
Phil@IC8POF

--- In sdr-radio-com@..., "Simon HB9DRV" wrote:
>
> Hi Phil,
>
>
>
> The Waterfall speed has been replaced with Resolution (at Pieter's request),
> this is the way professional SDR software is presented. For faster waterfall
> use lower resolution.
>
>
>
> If you want a faster waterfall using the remote server on your own network
> let me know, I can extend this if needed.
>
>
>
> Blame Pieter :-)
>
>
>
> Simon Brown, HB9DRV, http://sdr-radio.com
>
>
>
> From: sdr-radio-com@... [mailto:sdr-radio-com@...]
> On Behalf Of ic8pof
> Sent: 02 December 2010 19:18
> To: sdr-radio-com@...
> Subject: [sdr-radio-com] b492 WaterFall speed lacks ?
>
>
>
>
>
> GE SImon and All.
> Till now the console b492 works on my "ol"AMDs.
> But cannot find a speed control for the WaterFall. It is too slow now.
> Still using the b472 server.
> 73
> Phil@IC8POF
>

GE Simon.
Pieter is a Pro I am just End_User_Home_Button_Depresser_Ham.
Yes pleaseeeeeee a speed control is a must.
Even over local LAN.
Not much faster but little more, say 2 to 3 times than now.
Via sliding cursor of course.
I have tried to move the resolution but nothing happens to the speed.

Anyway I would suggest to put the manual contrast sliding-bar directly to the right-mouse of the VFO bar.
Instead or with the window width.
That is because the noise specially on 160mt changes rapidly and going into the RXOptions take always time.

73
Phil@IC8POF


--- In sdr-radio-com@..., "Simon HB9DRV" <simon@> wrote:

Hi Phil,



The Waterfall speed has been replaced with Resolution (at Pieter's request),
this is the way professional SDR software is presented. For faster waterfall
use lower resolution.



If you want a faster waterfall using the remote server on your own network
let me know, I can extend this if needed.



Blame Pieter :-)



Simon Brown, HB9DRV, http://sdr-radio.com



From: sdr-radio-com@... [mailto:sdr-radio-com@...]
On Behalf Of ic8pof
Sent: 02 December 2010 19:18
To: sdr-radio-com@...
Subject: [sdr-radio-com] b492 WaterFall speed lacks ?





GE SImon and All.
Till now the console b492 works on my "ol"AMDs.
But cannot find a speed control for the WaterFall. It is too slow now.
Still using the b472 server.
73
Phil@IC8POF

 

Hi,

 

Thanks - looks like it exploded trying to list either the soundcards or the SDR radios. I'll add more diagnostics.

 

Shout at me using SKYPE please, I am hb9drv (I am).

 

Simon Brown, HB9DRV, http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of Michael Oexner
Sent: 02 December 2010 19:54
To: sdr-radio-com@...
Subject: Re: [sdr-radio-com] Build 492 - Find That Crash (XP etc.) [2 Attachments]

 

 

[Attachment(s) from Michael Oexner included below]

Hi Simon,

> If (when) the console (or server) crashes send me the logfile, best of
> all post here with the logfile as an attachment.

Crash logfile plus xml file attached.

> I will need to talk with someone (anyone) with a crash so that I can
> send executables to find exactly where things are blowing up.

Please let me know what you need and when / how.

--
vy 73 + gd DX,

Michael

 

Thanks - was bad coding, actually never tested with 2MHz files before.

 

Simon Brown, HB9DRV, http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of nhpdxr
Sent: 02 December 2010 19:32
To: sdr-radio-com@...
Subject: [sdr-radio-com] Re: Build 492 - Find That Crash (XP etc.)

 

 

aaah....Now those 2MHz wide files are playing back nicely on W7 64-bit...don't have time right now for a serious test drive, but will be back. Thanks Simon.

best wishes,

Nick

--- In sdr-radio-com@..., "Simon HB9DRV" wrote:
>
> Hi All,
>
>
>
> http://www.ham-radio.ch/kits/sdr-radio.com/InternalOnly/SDR-RADIO_v1.1b492.e
> xe
>
>
>
> This is designed to help me find where this stupid software crashes / hangs
> with XP etc. Please see
> http://www.sdr-radio.com/Support/CrashesLockupsMore/tabid/351/language/en-GB
> /Default.aspx for information about the logfiles. If (when) the console (or
> server) crashes send me the logfile, best of all post here with the logfile
> as an attachment. If the software runs at 100% follow the instructions to
> create a crash dump.
>
>
>
> I will need to talk with someone (anyone) with a crash so that I can send
> executables to find exactly where things are blowing up.
>
>
>
> - - - -
>
>
>
> Otherwise a lot of work has gone into the IQ Analysis (more to do still) and
> a few other areas to keep Pieter quiet for a while.
>
>
>
> Simon Brown, HB9DRV, http://sdr-radio.com
>

 

GE Simon.
Pieter is a Pro I am just End_User_Home_Button_Depresser_Ham.
Yes pleaseeeeeee a speed control is a must.
Even over local LAN.
Not much faster but little more, say 2 to 3 times than now.
Via sliding cursor of course.
I have tried to move the resolution but nothing happens to the speed.

Anyway I would suggest to put the manual contrast sliding-bar directly to the right-mouse of the VFO bar.
Instead or with the window width.
That is because the noise specially on 160mt changes rapidly and going into the RXOptions take always time.

73
Phil@IC8POF

--- In sdr-radio-com@..., "Simon HB9DRV" wrote:
>
> Hi Phil,
>
>
>
> The Waterfall speed has been replaced with Resolution (at Pieter's request),
> this is the way professional SDR software is presented. For faster waterfall
> use lower resolution.
>
>
>
> If you want a faster waterfall using the remote server on your own network
> let me know, I can extend this if needed.
>
>
>
> Blame Pieter :-)
>
>
>
> Simon Brown, HB9DRV, http://sdr-radio.com
>
>
>
> From: sdr-radio-com@... [mailto:sdr-radio-com@...]
> On Behalf Of ic8pof
> Sent: 02 December 2010 19:18
> To: sdr-radio-com@...
> Subject: [sdr-radio-com] b492 WaterFall speed lacks ?
>
>
>
>
>
> GE SImon and All.
> Till now the console b492 works on my "ol"AMDs.
> But cannot find a speed control for the WaterFall. It is too slow now.
> Still using the b472 server.
> 73
> Phil@IC8POF
>

Hi Phil,



The Waterfall speed has been replaced with Resolution (at Pieter's request),
this is the way professional SDR software is presented. For faster waterfall
use lower resolution.



If you want a faster waterfall using the remote server on your own network
let me know, I can extend this if needed.



Blame Pieter :-)



Simon Brown, HB9DRV, http://sdr-radio.com



From: sdr-radio-com@... [mailto:sdr-radio-com@...]
On Behalf Of ic8pof
Sent: 02 December 2010 19:18
To: sdr-radio-com@...
Subject: [sdr-radio-com] b492 WaterFall speed lacks ?





GE SImon and All.
Till now the console b492 works on my "ol"AMDs.
But cannot find a speed control for the WaterFall. It is too slow now.
Still using the b472 server.
73
Phil@IC8POF

 

When I go beyond about 2/3 scale with the 'Resolution', I get some 'break-up' and if I continue all goes black on the waterfall with a message "Radio Not Started" but it is still playing and audio is good as ever.  Just some feedback... Win 7 64 bit; FA-66; V1.1. build 492.

On 12/2/2010 1:26 PM, Simon HB9DRV wrote:

 

Hi Phil,

 

The Waterfall speed has been replaced with Resolution (at Pieter's request), this is the way professional SDR software is presented. For faster waterfall use lower resolution.

 

If you want a faster waterfall using the remote server on your own network let me know, I can extend this if needed.

 

Blame Pieter :-)

 

Simon Brown, HB9DRV, http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of ic8pof
Sent: 02 December 2010 19:18
To: sdr-radio-com@...
Subject: [sdr-radio-com] b492 WaterFall speed lacks ?

 

 

GE SImon and All.
Till now the console b492 works on my "ol"AMDs.
But cannot find a speed control for the WaterFall. It is too slow now.
Still using the b472 server.
73
Phil@IC8POF

 

Hi Phil,

 

The Waterfall speed has been replaced with Resolution (at Pieter's request), this is the way professional SDR software is presented. For faster waterfall use lower resolution.

 

If you want a faster waterfall using the remote server on your own network let me know, I can extend this if needed.

 

Blame Pieter :-)

 

Simon Brown, HB9DRV, http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of ic8pof
Sent: 02 December 2010 19:18
To: sdr-radio-com@...
Subject: [sdr-radio-com] b492 WaterFall speed lacks ?

 

 

GE SImon and All.
Till now the console b492 works on my "ol"AMDs.
But cannot find a speed control for the WaterFall. It is too slow now.
Still using the b472 server.
73
Phil@IC8POF

 

Hi Phil,

 

The Waterfall speed has been replaced with Resolution (at Pieter's request), this is the way professional SDR software is presented. For faster waterfall use lower resolution.

 

If you want a faster waterfall using the remote server on your own network let me know, I can extend this if needed.

 

Blame Pieter :-)

 

Simon Brown, HB9DRV, http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...] On Behalf Of ic8pof
Sent: 02 December 2010 19:18
To: sdr-radio-com@...
Subject: [sdr-radio-com] b492 WaterFall speed lacks ?

 

 

GE SImon and All.
Till now the console b492 works on my "ol"AMDs.
But cannot find a speed control for the WaterFall. It is too slow now.
Still using the b472 server.
73
Phil@IC8POF

Hi All,



http://www.ham-radio.ch/kits/sdr-radio.com/InternalOnly/SDR-RADIO_v1.1b492.e
xe



This is designed to help me find where this stupid software crashes / hangs
with XP etc. Please see
http://www.sdr-radio.com/Support/CrashesLockupsMore/tabid/351/language/en-GB
/Default.aspx for information about the logfiles. If (when) the console (or
server) crashes send me the logfile, best of all post here with the logfile
as an attachment. If the software runs at 100% follow the instructions to
create a crash dump.



I will need to talk with someone (anyone) with a crash so that I can send
executables to find exactly where things are blowing up.



- - - -



Otherwise a lot of work has gone into the IQ Analysis (more to do still) and
a few other areas to keep Pieter quiet for a while.



Simon Brown, HB9DRV, http://sdr-radio.com