|
Re: Streaming at 60MHz Bandwidth
Max
On Mon, Oct 11, 2021 at 02:33 PM, Simon Brown wrote:
Just FWIW I now have this little beasty https://radio.taphere.com/ streaming at 60MHz bandwidthSimon A while ago you hinted that a new wideband SDR was in the pipeline possibly from one of known manufacturers? Is this it or is that still to come? I am wondering whether to go for an RX888 to replace my RSP2Pro or if it's worth hanging on for a while? Max
|
|
|
|
Simon's World Map
Simon's World Map updated with support for Hy-Gain DCU-1 protocol, thanks to Howard VE2AED for testing.
https://www.dit-dit-dit.com/world-map
Simon Brown, G4ELI
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
|
|
|
Re: Streaming at 60MHz Bandwidth
Siegfried Jackstien
a pluto rev c on steroids?? (better tcxo and usb c) dg9bfc sigi Am 11.10.2021 um 15:33 schrieb Simon
Brown:
|
|
|
|
Re: Streaming at 60MHz Bandwidth
Simon, Very interesting. 12 bit I assume to be able to handle 60 MHz b/w on a USB 3 port? I have contacted the company to inquire by email about availability and cost. I assume then it will run on SDR-Console with the HF extension? Thanks, Larry, K4LED
On Oct 11, 2021, at 9:33 AM, Simon Brown <simon@...> wrote:
|
|
|
|
Streaming at 60MHz Bandwidth
So,
Just FWIW I now have this little beasty https://radio.taphere.com/ streaming at 60MHz bandwidth, see attachment (DAB multiplexes). The innards are designed around the Analog Devices AD9361 (I think).
I have no information about price nor availability.
Simon Brown, G4ELI
-- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
|
|
|
Re: ShuttleXpress and SDR Console
Jochen Schaeuble
Hi altogether,
I know this thread is quite old, but I just released a small tool for that translates events from the Contour ShuttlExpress to MIDI events that can be used together with SDR Console. It uses the free loopMidi driver from Tobias Erichsen (https://www.tobias-erichsen.de/software/loopmidi.html) This tool is written in Go (https://go.dev) as I needed a use case to learn this language ;). The original driver from Contour is not required. You can find the tool here: https://github.com/dg1psi/shuttlemidi I would love to hear your feedback. 73, Jochen, DG1PSI
|
|
|
|
Re: Band Plan
mathews ember
It would be interesting to hear some stories about those days
|
|
|
|
Re: Band Plan
toggle quoted messageShow quoted text
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Frank
Sent: 09 October 2021 17:18 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Band Plan
On Tue, Oct 5, 2021 at 05:13 AM, Simon Brown wrote:
Hi Simon -- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
|
|
|
Re: Band Plan
On Tue, Oct 5, 2021 at 05:13 AM, Simon Brown wrote:
Hi Simon Is it already available somewhere that I can't find it info new or kit ?? As always great job ...!!! 73
|
|
|
|
Re: Cannot go On Air
Siegfried Jackstien
all settings were gone ... no converrter offset .. no mic selected in tx panel ... etc etc several settings wrong i had it all working ... somehow it did not (guessing user error)
and enzo then reinstalled all (and cleaned up registry etc.) so i
had to remakeall settings .., lnb offset, tx offset, audio gain,
equalizer and ...and greetz sigi dg9bfc Am 08.10.2021 um 15:33 schrieb Simon
Brown:
|
|
|
|
Re: Cannot go On Air
jdow
Unfortunately everything is not stored in one place.
toggle quoted messageShow quoted text
First open RegEdit. Navigate to: Computer\HKEY_CURRENT_USER\SOFTWARE Scroll down to: SDR-RADIO.com (V3) Right click on it and select export. Give it a suitable file name in a safe folder. Click save. Second open a folder anywhere. In the folder header type in: %appdata% Scroll down to: SDR-RADIO.com (V3) Click left mouse button on it once. Type control-C Navigate to the safe folder used on the registry edit step. Type control-V Third - go about your life as normal. To restore EVERYTHING (including any errors:that existed with your last backup): First navigate to: %AppData%. Rename "SDR-RADIO.com (V3)" to "SDR-RADIO.com (V3) old" Then navigate to the safe folder from above. Double left click on the .reg file and tell it to continue when it asks the are you sure question. Then left click on the "SDR-RADIO.com (V3)" folder you copied into it before. Navigate back to: %AppData% Type control-V. Then proceed with the old complete data set restored. {o.o} On 20211008 10:14:07, Vincenzo Mone
wrote:
|
|
|
|
Re: Cannot go On Air
On Fri, Oct 8, 2021 at 06:14 PM, Vincenzo Mone wrote:
Hi Enzo See latest Beta 2365 where Simon has added a new Backup/Restore option: https://www.sdr-radio.com/download#Beta Also, for a manual backup, I think your question was answered here? https://forum.sdr-radio.com:4499/viewtopic.php?p=7021#p7021 Also see here for the user data locations: https://www.sdr-radio.com/reset You need to back up this folder: C:\Users\\AppData\Roaming\SDR-RADIO.com (V3)\Console\Ident0 There is a separate folder for each "Identity", Ident0, Ident1, Ident2 etc. For a complete backup you may also need to backup the Registry entries as mentioned by Joanne (jdow) in the Forum post I linked above. 73 Max
|
|
|
|
Re: Cannot go On Air
Vincenzo Mone
Hello Max, what does it mean? I am looking if there is a possibility to save all the settings so if I have to re install the program from scratch, I can restore the settings as it was before . Thanks
73 de Enzo IK8OZV ****** GSM +39 328 7110193 ****** ***** SMS +39 328 7110193 ***** *********************************
Da: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Per conto di Max
On Fri, Oct 8, 2021 at 02:37 PM, Vincenzo Mone wrote:
Hi Enzo
|
|
|
|
Re: Cannot go On Air
Max
On Fri, Oct 8, 2021 at 02:37 PM, Vincenzo Mone wrote:
Hi Enzo You can save different "Identities" for different setups (Identity for Sat - Identity for HF - Identity for UHF - Identity for different SDR etc. etc.) 73 Max
|
|
|
|
Re: Cannot go On Air
Vincenzo Mone
We have just uninstalled and re installed the program and re made the settings. Is there a possibility to save all settings? Thanks
73 de Enzo IK8OZV ****** GSM +39 328 7110193 ****** ***** SMS +39 328 7110193 ***** *********************************
Da: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Per conto di Simon Brown
Yea,
Problem was what?
Simon Brown, G4ELI
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien
Sent: 08 October 2021 11:17 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Cannot go On Air
i helped him remote via teamviewer ... at least it works (again) dg9bfc sigi
- + - + - Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
|
|
|
Re: Cannot go On Air
toggle quoted messageShow quoted text
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Siegfried Jackstien
Sent: 08 October 2021 11:17 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Cannot go On Air
i helped him remote via teamviewer ... at least it works (again) dg9bfc sigi -- - + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.
|
|
|
|
Re: Band Plan
When I worked for Department of Communications back in 1977, there were lots of Good Buddies in Toronto who would modify Yaesu and other han gear and play around between channel 40 and the bottom end of the 10 meter band. Oh what fun we had chasing them with DF equipment, and sometimes with the help of the cops, seizing their equipment
|
|
|
|
Re: Cannot go On Air
Vincenzo Mone
Thanks Sigi for your helps
73 de Enzo IK8OZV ****** GSM +39 328 7110193 ****** ***** SMS +39 328 7110193 ***** *********************************
Da: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Per conto di Siegfried Jackstien
i helped him remote via teamviewer ... at least it works (again) dg9bfc sigi Am 07.10.2021 um 16:50 schrieb Simon Brown:
|
|
|
|
Re: Cannot go On Air
Siegfried Jackstien
i helped him remote via teamviewer ... at least it works (again) dg9bfc sigi Am 07.10.2021 um 16:50 schrieb Simon
Brown:
|
|
|
|
Re: Cannot go On Air
Siegfried Jackstien
2400+8089.5=10489.5 ... thats correct to use that 8089.5 tx offset dg9bfc sigi Am 08.10.2021 um 02:54 schrieb jdow:
I am coming from out in left field here; but, I thought QO-100's uplink was in the 2.4 GHz region. But your picture is declaring the TX is on 8.0895 GHz. Is your TX set up correctly?
|
|
|