Date   

#support Receive Window #support

Geoff
 

Hi, can someone tell me how to get my Receive window back to the 'normal' docking position on the left hand side of the screen, please. I'm obviously missing something simple...

It appears to be stuck along the top. I can detach it by 'Floating' it but 'Docking' puts it back here. MTIA

Regards
Geoff


Re: To the user of my Superstation Servers who has an IP address from Scranton, KS…

Simon Brown
 

I wonder whether it’s USB? I used to see this myself but no longer. I would like to find out what it is.

 

As a side note, are the Airspys using the latest firmware?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Kriss Kliegle KA1GJU
Sent: 01 October 2021 02:16
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] To the user of my Superstation Servers who has an IP address from Scranton, KS…

 

Please contact me via ka1gju@...
You are locking up my servers so NOBODY can use them. I need to know what you are doing
to make this happen and pass it along to Simon.
Guest users only have 1 hr per session, so now I have to reset the servers… if the laptop responds to
TeamViewer. 🙄

73 Kriss KA1GJU


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


To the user of my Superstation Servers who has an IP address from Scranton, KS…

Kriss Kliegle KA1GJU
 

Please contact me via ka1gju@...
You are locking up my servers so NOBODY can use them. I need to know what you are doing
to make this happen and pass it along to Simon.
Guest users only have 1 hr per session, so now I have to reset the servers… if the laptop responds to
TeamViewer. 🙄

73 Kriss KA1GJU


Re: Request: Add Midi control and keyboard shortcuts for Satellite External Radio #satellites

SM0TGU
 

Please see this for my solution:
https://github.com/LarsThunberg/SDR-Console-VFO-Remote

//Lars SM0TGU 


Re: Unified Remote for controlling SDR Console

SM0TGU
 

I have made a virtual VFO controller. Please feel free to download from:
https://github.com/LarsThunberg/SDR-Console-VFO-Remote

//Lars SM0TGU 


Re: 2365 Beta won't start the RSPduo. This worked fine in version 2346 #bug

milairuk
 

Hi Simon,

I did say my RSPdx opened @ 10MHz but not my RSP1A which only works at 8MHz. I was only adding a comment to the thread, I didn't mean to confuse more.

John


Re: Question about doppler correction and my IC-705 - doppler correction not working properly

SM0TGU
 

Mark,
I'm using IC-705 as TX with SDR-Console (Airspy as SDR) and do not have any problem with doppler correction. It is rock solid and I have used FT4 on satellites with high doppler without any problem.
So it is hard to see what the problem can be for your setup.

Regarding your question about adjust the base transmit frequency: you do not have that function in SDR Console, that is correct. I'm working on software based VFO controller for both RX VFO and TX VFO in the satellite external radio. Initial tests seems very promising. I will update the following post when I'm done.

//Lars SM0TGU 


Re: 2365 Beta won't start the RSPduo. This worked fine in version 2346 #bug

Simon Brown
 

John,

 

The SDRplay software structure is such that it may well be independent of the radio. There’s a service which runs in the background and connects to the radios, the API talks to this service, this architecture hasn’t changes between 3.07 and 3.08 and I doubt it’ll change in the future.

 

Now it could well be a bug on my side but 10MHz does work with my RSPdx so I am a bit confused.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of milairuk via groups.io
Sent: 27 September 2021 07:54
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] 2365 Beta won't start the RSPduo. This worked fine in version 2346 #bug

 

Just out of interest I tried this on my RSP1A and got the same problem. Opens @ 8MHz but doesn't work if selecting 10MHz. I then tried this on my RSPdx which opened @ 10MHz with no problem. 

Not sure about the architecture of the RSP2, but maybe it's similar to the 1A ?

73  John


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: 2365 Beta won't start the RSPduo. This worked fine in version 2346 #bug

milairuk
 

Just out of interest I tried this on my RSP1A and got the same problem. Opens @ 8MHz but doesn't work if selecting 10MHz. I then tried this on my RSPdx which opened @ 10MHz with no problem. 

Not sure about the architecture of the RSP2, but maybe it's similar to the 1A ?

73  John


Re: Production of Hermes-Lite 2.0 Suspended

Michael Durkin
 

I'll sell mine .... barley used ... 


On Sun, Sep 26, 2021, 5:48 AM Sid Boyce <boyce.sid@...> wrote:
Hi Steve,
That's a pity but I could see it coming as I've indicated in very recent
posts, so no surprise having read of the impact of chip shortages on
just about all industries.
73 ... Sid.

On 26/09/2021 05:00, Steve Haynal wrote:
> Hi Group,
>
> I am sorry to inform you that Makerfabs and I have agreed to suspend
> production of the Hermes-Lite 2.0 until the global integrated circuit
> supply chain is in a more normal state. Although Makerfabs was quoted
> a price of $60 for the FPGA just a few days ago, the price is now
> $135. Makerfabs has checked with more than 20 reputable suppliers and
> has not found stock at a reasonable price. A price of $135 for a part
> which is typically $20 to $30 goes against the spirit of this project
> which is low-cost. It is also a business risk for Makerfabs to invest
> in a build of 100 units when the price of the FPGA is so volatile.
>
> There are 40 plus people who have already ordered at the new $289
> price point. Makerfabs will refund your money. Again, Makerfabs and I
> are sincerely sorry for the inconvenience.
>
> We will not be making partial kits. Given the large number and wide
> diversity of expectations and skills of people interested in the
> Hermes-Lite, this just opens up a Pandora's box of support issues. The
> Hermes-Lite is entirely open source and open hardware, so those who
> believe they have the right set of skills, expertise and patience can
> download all the files from github and build their own. I know of
> maybe a dozen users who went that route.
>
> Please monitor this group for details on when Hermes-Lite production
> will begin again.
>
> 73,
>
> Steve
> kf7o
>
> --
> You received this message because you are subscribed to the Google
> Groups "Hermes-Lite" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to hermes-lite+unsubscribe@....
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/hermes-lite/43013796-aa73-4a40-ab6c-49b667a58252n%40googlegroups.com
> <https://groups.google.com/d/msgid/hermes-lite/43013796-aa73-4a40-ab6c-49b667a58252n%40googlegroups.com?utm_medium=email&utm_source=footer>.


--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks

--
You received this message because you are subscribed to the Google Groups "Hermes-Lite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite+unsubscribe@....
To view this discussion on the web visit https://groups.google.com/d/msgid/hermes-lite/d16d29d7-6e35-3d43-6990-c1f96b2f1122%40gmail.com.


Re: RFI from mains ethernet adaptors

Brent Seres/ VE3CUS
 

FWIW,  here in Canada, I have opened up switching supplies and found spots on the circuit board where components were missing.  I've long suspected that these may have been filter components which were included in a device when submitted for testing and approval prior to sale, and left out for cost savings once approved  No proof...just suspicion..

73
Brent
VE3CUS 





Re: Request: Add Midi control and keyboard shortcuts for Satellite External Radio #satellites

SM0TGU
 

I have made an AutoHotKey script that actually solves this problem. I will write a short post about this shortly and publish the script on AMSAT-SM website.
//Lars SM0TGU 


Unified Remote for controlling SDR Console

SM0TGU
 

Hello,
I have just tested the free version for Android and the "Scroll Wheel" remote works very good controlling the VFO. No need to connect an external VFO knob.
Is anyone using Unified Remote for controlling SDR Console, like for VFO and shortcuts? And maybe has a made a custom remote?

https://www.unifiedremote.com/

/Lars SM0TGU 


Re: RFI from mains ethernet adaptors

Allan Isaacs
 

Hi Kriss

This scan is from our Hotpoint washing machine in standby which plays musical notes on a portable radio. Not the usual mush.

The scan in green is the washing machine, 4MHz plus minus 1MHz.

Yellow 30 feet away.

Because the mains plug is behind the thing it will need an extension lead so I can turn it off from standby.

Allan G3PIY


From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Kriss Kliegle KA1GJU
Sent: 26 September 2021 12:50
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] RFI from mains ethernet adaptors

 

Max,
I cured mine with an FT-240-31 Ferrite Toroid and an improved AC line filter, all of which I installed inside the washer. My first SDR antenna (EFW) was overhead the washer by about 25'.
Mine had a similar, useless, small plastic AC line filter as the OP in the following page:
https://www.eham.net/article/12278

I don't remember the make and model of the filter, but was in a metal case just like the OP's. Between the toroid and the filter, it was gone! There's a little RFI coming from the control panel, but only within a foot of it.

73 Kriss KA1GJU

 


Re: RFI from mains ethernet adaptors

Kriss Kliegle KA1GJU
 

Max,
I cured mine with an FT-240-31 Ferrite Toroid and an improved AC line filter, all of which I installed inside the washer. My first SDR antenna (EFW) was overhead the washer by about 25'.
Mine had a similar, useless, small plastic AC line filter as the OP in the following page:
https://www.eham.net/article/12278

I don't remember the make and model of the filter, but was in a metal case just like the OP's. Between the toroid and the filter, it was gone! There's a little RFI coming from the control panel, but only within a foot of it.

73 Kriss KA1GJU

 


Re: RFI from mains ethernet adaptors

Tom Crosbie G6PZZ
 

And generate your own wave energy…

 

Max, you could volunteer to do the washing - 100%-RFI-free :-

On 26/09/2021 10:02, Max wrote:

Eventually track it down. It's our own washing machine.

...Makes RFI racket when motor is turning drum, hence the "stop-start". ..


Re: 2365 Beta won't start the RSPduo. This worked fine in version 2346 #bug

Frank
 
Edited

HI Simon
Learned about the new API?

If it helps, I did a quick test on a Probook6560b PC with I5 and 16MB ram ... It's not a performing PC but it should be more than enough to handle SDRplay.
I installed SDRconsole and Sdrplay RSP2 API, and even here at @ 10MHz BW it doesn't work.
 
Without any problems with all other bandwidths from 0.500 to 8MHz.

It's not that I use @ 10MHz so much also because the quality of the RSP2 degrades .... but it was still useful for various searches.
 
After the test I uninstalled all the RSP2 and I forgot to save the "LOG", sorry ... in any case the same thing as on the big PC.

Maybe I could try going back to API 3.07 to check but I don't know where to copy it or how to do it ...

73



Re: RFI from mains ethernet adaptors

Max
 

On Sun, Sep 26, 2021 at 11:35 AM, Michael.2E0IHW wrote:
Max, you could volunteer to do the washing - 100%-RFI-free :-
Don't worry, I am the modern man...... do my full share of the domestic tasks!

Max


Re: RFI from mains ethernet adaptors

Michael.2E0IHW
 

Max, you could volunteer to do the washing - 100%-RFI-free :-

On 26/09/2021 10:02, Max wrote:
Eventually track it down. It's our own washing machine.
...Makes RFI racket when motor is turning drum, hence the "stop-start". ..


Re: FW: Production of Hermes-Lite 2.0 Suspended

Simon Brown
 

Yes,

 

I do have a unit.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of Max
Sent: 26 September 2021 09:26
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] FW: Production of Hermes-Lite 2.0 Suspended

 

On Sun, Sep 26, 2021 at 05:53 AM, Simon Brown wrote:

HL2 Run not happening

That is very sad news and gutting for those who have ordered. At least you've got one already I think Simon?

The world really is in the most bizarre state at the moment. Can't even get petrol for the mower!

Max


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

4561 - 4580 of 68661