BTW, what software do I need to access these online Perseus-servers:
https://microtelecom.it/map/ServersMap.html

Can SDR Console access them?

Hi Simon,
is this the one you hinted about long ago:

https://microtelecom.it/en

Thanks,

Mauno

And finally! From Nico:
After the forced Covid-19 stops the Friedrichshafen 2022 Ham Radio Messe is back at the door and we at Elad and Microtelecom are pleased to present you the Perseus 22 direct sampling communication receiver.

- 2 HF synchronous channels (0.01-70 MHz)
- 2 VHF synchronous channels (70-225 MHz)
- Up to 100 MSPS real-time bandwidth for wideband IF applications
- Space/Polarization Diversity, Interference Cancellation enabled and much more.

Visit the Elad booth at the Friedrischafen Messe from 24 to 26 June to learn more.
--
Bjarne Mjelde
Blog: arcticdx.blogspot.com - Twitter: @Arcticlistener

QSL.
That was the intention of my question. I was was unclear asking :-)
Now I know.
I had seen that as well, but was just puzzled at that time. I will try it out again.
A very handy feature. That is the time you need to get a IQ-recording started.
73 / Ingolf

--

Greetings Patrick...

I am running a similar set of software; info on my setup might help.  Station here is a Yaesu FTDX-10, Log4OM and SDRConsole.  All three of them follow each other.  I do all, or most of, the tuning by moving the cursor about on the SDRConsole screen; the radio and logging program follow in frequency and band changes.  Am also running a software called Win4Yaesu which provides cat control of the radio and also provides virtual comports which allow several other pieces of software to connect to the Yaesu.  Most likely, in your situation, all you may need is a "port splitter" software package to allow both SDRC and Log4OM to communicate with the radio at the same time.

Only problem is that my station is all disconnected right now;  stuff is everywhere and it all needs to get connected properly.  Hope to be on line later this evening, and I'll test some connectivity which may work for your station.  More to follow...

Best 73,
Steve KH6CT

Hi.
Is this fix incorporated in the upcoming V3.2 release?
73 / Ingolf, SM6FHZ

Hi all.
Does anyone have any questions, additions or corrections to my "Two Channel Beam Steering" paper?
Comments are most welcome.
However I do not see it attached to this thread any longer. It seems to have disappeared.
Do I have to re-submit it?
I plan to take a look at how the Radiation Patterns for two phased loops looks with different phasing.
However, this quickly becomes quite complex with all possible variations of the loop orientations possible. There is not just one answer here.
There is a myriad of solutions considering frequency, distance between the loops, relative orientation between the loops etc. etc.
73 / Ingolf, SM6FHZ