Date   

Re: Not Preview 6 (Kit Enclosed)

Thom - W8TAM
 

I also have experienced this volume zeroing issue with N1MM+, and have verified that it still exists in Not Preview 6.

I'm using the most recent version of N1MM+ on Windows 10, with a RSP2 Pro.

The only difference I noticed from Carl's report is I'm using a faster bps rate, 57600.

73,
-Thom
w8tam


On Mon, May 1, 2017 at 8:26 PM, physics1@... [sdr-radio-com] <sdr-radio-com@...> wrote:
 

I forgot to mention, I used the ts2000 for the N1MM connection as recommended in your article.
Carl K0YCR



Re: Not Preview 6 (Kit Enclosed)

carl watterson
 

I forgot to mention, I used the ts2000 for the N1MM connection as recommended in your article.
Carl K0YCR


SDR Console and ELAD FDM-DUO

Kjell-Goran SM4GRP
 

Hi all,
I'm new to SDR Console and new to this group. I would like to run SDR Console V3 with my ELAD FDM-DUO. When I first tried to do so it seemed that SDR Console does not support FDM-DUO. I tried to connect by chosing the FDM S2 in SDR Console V3 but it didn't work. I just want to check with you guys if SDR Console does not support the FDM-DUO or if I'm doing something wrong.

Thanks and 73 / Kjell-Göran SM4GRP



Re: Not Preview 6 (Kit Enclosed)

carl watterson
 

Simon,
That fixed the mute issue. Now another. I created a VSPE connector virtual serial port for N1MM logger plus. I called it com 10 and set the baud to 38400 on both ends.
It tracks frequency ok, but it zeros out the volume on Not preview 6. I manually increase it and it automatically
zeros out again. Any ideas?
Carl K0YCR


Re: Not Preview 6 (Kit Enclosed)

Paul NN4F
 

working well here on RSP1/2 and LimeSDR no errors or startup issues

Paul - NN4F


Paul Jones - NN4F
Ridgeville, SC EM93TB

Email: paul@...
Facebook.com/groups/sdrplay




On Mon, May 1, 2017 at 2:46 PM, david.painter@... [sdr-radio-com] <sdr-radio-com@...> wrote:
 

Funcube Dongle Pro + and using 64 bit W7


David - G4PNX



Re: Bandwidth changes Reading

Bernard Malet
 

I change only by stopping / starting the radio

Bernard

 

De : sdr-radio-com@... [mailto:sdr-radio-com@...]
Envoyé : lundi 1 mai 2017 20:07
À : sdr-radio-com@...
Objet : RE: [sdr-radio-com] Bandwidth changes Reading
Critère de diffusion : Confidentiel

 

 

Hi,

 

How are you changing the bandwidth – via the Bandwidth dropdown in the ribbon bar or by stopping / starting the radio?

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 01 May 2017 15:57
To: sdr-radio-com@...
Subject: RE: [sdr-radio-com] Bandwidth changes Reading [1 Attachment]
Importance: High
Sensitivity: Confidential

 

 

[Attachment(s) from MALET Bernard included below]

Simon
As you requested in attachment the logfile

Bernard

 

De : sdr-radio-com@... [mailto:sdr-radio-com@...]
Envoyé : lundi 1 mai 2017 16:15
À : sdr-radio-com@...
Objet : RE: [sdr-radio-com] Bandwidth changes Reading
Critère de diffusion : Confidentiel

 

 

Hi,

 

Please start the radio, check that the error is still there and send the logfile as an attachment.

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 01 May 2017 14:54
To: sdr-radio-com@...
Subject: [sdr-radio-com] Bandwidth changes Reading [1 Attachment]
Importance: High
Sensitivity: Confidential

 

 

[Attachment(s) from MALET Bernard included below]

Dear Simon,

Why Bandwidth changes Reading
This problem occurs for the following bandwidths: 7.5 MHz, 15 MHz, 30 MHz, 50 MHz, 80 MHz
See PDF document attached

Bernard


Re: Not Preview 6 (Kit Enclosed)

david.painter@...
 

Funcube Dongle Pro + and using 64 bit W7


David - G4PNX


Re: Satellite Tracker 📡 🛰

Ken Alexander
 

I think that applies to several other Yaesu transceivers, notably the FT-817.  I currently use two of them; for transmit and the second one for receive...an FT-1634!

Ken
VE3HLS


On 2017-04-24 8:05 AM, 'Simon Brown' simon@... [sdr-radio-com] wrote:

 

Hi Mart,

 

The satellite tracking tracks the downlink using the SDR and optionally the uplink using an external radio (for example the FT 991). It doesn’ tray both VFO-A and VFO-B but that’s a good idea.

 

There is a problem with the FT-991 – the TX frequency cannot be changed (doppler correction) while you are transmitting.

 

In the future you will be able to track TX and RX using a SDR transceiver such as the LimeSDR.

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 23 April 2017 20:27
To: sdr-radio-com@...
Subject: [sdr-radio-com] Re: Satellite Tracker
📡 🛰

 

 

Hello!

 

I just started with satellites and i have high hopes of sdr-console tracker. I have Yaesu 991 and have used it couple of days standalone without computer aid for satellite comm. Not easy at all..  

 

Does current version track only active VFO frequency? It would be helpful if i can set that VFO-A is downlink and VFO-B is uplink for example and i can set that tracker corrects transmit frequency of one of them or even both rx and tx.

If using dongle for receive then correction of only active VFO is ok but in case of VFO-A/B cross band split operation i need VFO-B correction.

 

I can be very wrong because i am rookie in satellite work so please excuse me!

 

73, Mart ES2MA

 



Memory Management

Simon Brown
 

All,

 

One thing I forgot to mention – I fixed some memory management errors which were fatal; I’ve also reduced the size of the data stored in the various data caches.

 

Simon Brown, G4ELI
http://sdr-radio.com

 


Re: Not Preview 6 (Kit Enclosed)

Simon Brown
 

Hi,

 

Also in the ribbon bar, Home, Waterfall DSP there Auto-mute, try this. It’ll react faster than the CAT commands.

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 01 May 2017 17:20
To: sdr-radio-com@...
Subject: RE: [sdr-radio-com] Not Preview 6 (Kit Enclosed)

 

 

Simon,

I have the elad fdm s2 connected to the rf out on the ftdx3000. so I use the elad for receive and the

ftdx3000 for transmit, with vspe omnirig and Not Preview 6. I cannot detect any issues with the software

with the exception of the mute. There is a slight delay --enough to let some audio through that shows up

on the spectrum and sounds a bleep. This is not new. It would improve the T/R function if you could issue

a mute command to the elad directly.

Otherwise it looks great, operates very well on cw.

Thanks again.

Carl K0YCR



---In sdr-radio-com@..., <simon@...> wrote :

damned windows 7 64 system has already 50% cpu load with just the bare desktop running”

 

That’s wrong, should be 1% or 2% max. Check for trojans, viruses etc.

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 01 May 2017 13:07
To: sdr-radio-com@...
Subject: Re: [sdr-radio-com] Not Preview 6 (Kit Enclosed)

 

 

does not crash but gives a bit choppy audio with my dualcore laptop and lime running only 2.5 megs :-(

my hardware is tooo slow

and damned windows 7 64 system has already 50% cpu load with just the bare desktop running ... grmbl

upgrading from xp to 7/64 and i have both feet standing on the brake pedal

dg9bfc sigi

ps hdsdr works with 4 megs bw but no stereo or rds decode

 

Am 30.04.2017 um 20:36 schrieb 'Simon Brown' simon@... [sdr-radio-com]:

 

So,

 

Before I make preview 6 here’s a little something, I just want to be sure it doesn’t explode before I update my website.

 

Sorry I don’t have a list of what’s new etc., but recently:

 

  • 64-bit uses CUDA 8 (you don’t have to do anything)
  • Fixed quite a few bugs in the satellite tracking
  • Added scheduled recordings
  • Added a funky FM Stereo display

 

So, are you feeling lucky?

 

64-bit: https://www.dropbox.com/s/yur9idcy8xe1f7c/SDR-Radio%20V3%2C%2064-bit%2C%202017-04-30_1928.exe?dl=0

32-bit: https://www.dropbox.com/s/jom0nf0gfmlhfow/SDR-Radio%20V3%2C%2032-bit%2C%202017-04-30_1930.exe?dl=0

 

Simon Brown, G4ELI
http://sdr-radio.com

 

 


Re: Bandwidth changes Reading [1 Attachment]

Simon Brown
 

Hi,

 

How are you changing the bandwidth – via the Bandwidth dropdown in the ribbon bar or by stopping / starting the radio?

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 01 May 2017 15:57
To: sdr-radio-com@...
Subject: RE: [sdr-radio-com] Bandwidth changes Reading [1 Attachment]
Importance: High
Sensitivity: Confidential

 

 

[Attachment(s) from MALET Bernard included below]

Simon
As you requested in attachment the logfile

Bernard

 

De : sdr-radio-com@... [mailto:sdr-radio-com@...]
Envoyé : lundi 1 mai 2017 16:15
À : sdr-radio-com@...
Objet : RE: [sdr-radio-com] Bandwidth changes Reading
Critère de diffusion : Confidentiel

 

 

Hi,

 

Please start the radio, check that the error is still there and send the logfile as an attachment.

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 01 May 2017 14:54
To: sdr-radio-com@...
Subject: [sdr-radio-com] Bandwidth changes Reading [1 Attachment]
Importance: High
Sensitivity: Confidential

 

 

[Attachment(s) from MALET Bernard included below]

Dear Simon,

Why Bandwidth changes Reading
This problem occurs for the following bandwidths: 7.5 MHz, 15 MHz, 30 MHz, 50 MHz, 80 MHz
See PDF document attached

Bernard


Re: Not Preview 6 (Kit Enclosed)

Mike Bott <mike_bott@...>
 

The only "issue" I've encountered so far, is a monster volume increase when in the FM broadcast band.�

On 05/01/2017 01:09 PM, Paul Buch cantorpaul@... [sdr-radio-com] wrote:

�

Hi Simon:

All looks good on SDRPlay R2, though I had to reduce bandwidth to 1 MHz when playing with the new FM Broadcast tools as the lag made it unusable when using larger.

pb



Re: Not Preview 6 (Kit Enclosed)

Paul Buch
 

Hi Simon:

All looks good on SDRPlay R2, though I had to reduce bandwidth to 1 MHz when playing with the new FM Broadcast tools as the lag made it unusable when using larger.

pb


Re: Not Preview 6 (Kit Enclosed)

carl watterson
 

Simon,
I have the elad fdm s2 connected to the rf out on the ftdx3000. so I use the elad for receive and the
ftdx3000 for transmit, with vspe omnirig and Not Preview 6. I cannot detect any issues with the software
with the exception of the mute. There is a slight delay --enough to let some audio through that shows up
on the spectrum and sounds a bleep. This is not new. It would improve the T/R function if you could issue
a mute command to the elad directly.
Otherwise it looks great, operates very well on cw.
Thanks again.
Carl K0YCR


---In sdr-radio-com@..., <simon@...> wrote :

damned windows 7 64 system has already 50% cpu load with just the bare desktop running”

 

That’s wrong, should be 1% or 2% max. Check for trojans, viruses etc.

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 01 May 2017 13:07
To: sdr-radio-com@...
Subject: Re: [sdr-radio-com] Not Preview 6 (Kit Enclosed)

 

 

does not crash but gives a bit choppy audio with my dualcore laptop and lime running only 2.5 megs :-(

my hardware is tooo slow

and damned windows 7 64 system has already 50% cpu load with just the bare desktop running ... grmbl

upgrading from xp to 7/64 and i have both feet standing on the brake pedal

dg9bfc sigi

ps hdsdr works with 4 megs bw but no stereo or rds decode

 

Am 30.04.2017 um 20:36 schrieb 'Simon Brown' simon@... [sdr-radio-com]:

 

So,

 

Before I make preview 6 here’s a little something, I just want to be sure it doesn’t explode before I update my website.

 

Sorry I don’t have a list of what’s new etc., but recently:

 

  • 64-bit uses CUDA 8 (you don’t have to do anything)
  • Fixed quite a few bugs in the satellite tracking
  • Added scheduled recordings
  • Added a funky FM Stereo display

 

So, are you feeling lucky?

 

64-bit: https://www.dropbox.com/s/yur9idcy8xe1f7c/SDR-Radio%20V3%2C%2064-bit%2C%202017-04-30_1928.exe?dl=0

32-bit: https://www.dropbox.com/s/jom0nf0gfmlhfow/SDR-Radio%20V3%2C%2032-bit%2C%202017-04-30_1930.exe?dl=0

 

Simon Brown, G4ELI
http://sdr-radio.com

 

 


Re: Not Preview 6 (Kit Enclosed) - OneDrive Links

Terry W6LEO
 

Working great hear. My Satellite tracking bugs seems better.
RSP1

Terry


On Sunday, April 30, 2017 2:39 PM, "'Simon Brown' simon@... [sdr-radio-com]"


 
In case you have issues with Dropbox:
 
64-bit: https://1drv.ms/u/s!AovWaZDu7HrdzlJ7XS01VIaDUrA3
 
Simon Brown, G4ELI
http://sdr-radio.com
 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 30 April 2017 21:37
To: sdr-radio-com@...
Subject: [sdr-radio-com] Not Preview 6 (Kit Enclosed)
 
 
So,
 
Before I make preview 6 here’s a little something, I just want to be sure it doesn’t explode before I update my website.
 
Sorry I don’t have a list of what’s new etc., but recently:
 
  • 64-bit uses CUDA 8 (you don’t have to do anything)
  • Fixed quite a few bugs in the satellite tracking
  • Added scheduled recordings
  • Added a funky FM Stereo display
 
So, are you feeling lucky?
 
 
Simon Brown, G4ELI
http://sdr-radio.com
 



Re: Bandwidth changes Reading

Bernard Malet
 

Simon
As you requested in attachment the logfile

Bernard

 

De : sdr-radio-com@... [mailto:sdr-radio-com@...]
Envoyé : lundi 1 mai 2017 16:15
À : sdr-radio-com@...
Objet : RE: [sdr-radio-com] Bandwidth changes Reading
Critère de diffusion : Confidentiel

 

 

Hi,

 

Please start the radio, check that the error is still there and send the logfile as an attachment.

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 01 May 2017 14:54
To: sdr-radio-com@...
Subject: [sdr-radio-com] Bandwidth changes Reading [1 Attachment]
Importance: High
Sensitivity: Confidential

 

 

[Attachment(s) from MALET Bernard included below]

Dear Simon,

Why Bandwidth changes Reading
This problem occurs for the following bandwidths: 7.5 MHz, 15 MHz, 30 MHz, 50 MHz, 80 MHz
See PDF document attached

Bernard


Re: Bandwidth changes Reading [1 Attachment]

Simon Brown
 

Hi,

 

Please start the radio, check that the error is still there and send the logfile as an attachment.

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 01 May 2017 14:54
To: sdr-radio-com@...
Subject: [sdr-radio-com] Bandwidth changes Reading [1 Attachment]
Importance: High
Sensitivity: Confidential

 

 

[Attachment(s) from MALET Bernard included below]

Dear Simon,

Why Bandwidth changes Reading
This problem occurs for the following bandwidths: 7.5 MHz, 15 MHz, 30 MHz, 50 MHz, 80 MHz
See PDF document attached

Bernard


Re: Not Preview 6 (Kit Enclosed)

Simon Brown
 

damned windows 7 64 system has already 50% cpu load with just the bare desktop running”

 

That’s wrong, should be 1% or 2% max. Check for trojans, viruses etc.

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 01 May 2017 13:07
To: sdr-radio-com@...
Subject: Re: [sdr-radio-com] Not Preview 6 (Kit Enclosed)

 

 

does not crash but gives a bit choppy audio with my dualcore laptop and lime running only 2.5 megs :-(

my hardware is tooo slow

and damned windows 7 64 system has already 50% cpu load with just the bare desktop running ... grmbl

upgrading from xp to 7/64 and i have both feet standing on the brake pedal

dg9bfc sigi

ps hdsdr works with 4 megs bw but no stereo or rds decode

 

Am 30.04.2017 um 20:36 schrieb 'Simon Brown' simon@... [sdr-radio-com]:

 

So,

 

Before I make preview 6 here’s a little something, I just want to be sure it doesn’t explode before I update my website.

 

Sorry I don’t have a list of what’s new etc., but recently:

 

  • 64-bit uses CUDA 8 (you don’t have to do anything)
  • Fixed quite a few bugs in the satellite tracking
  • Added scheduled recordings
  • Added a funky FM Stereo display

 

So, are you feeling lucky?

 

64-bit: https://www.dropbox.com/s/yur9idcy8xe1f7c/SDR-Radio%20V3%2C%2064-bit%2C%202017-04-30_1928.exe?dl=0

32-bit: https://www.dropbox.com/s/jom0nf0gfmlhfow/SDR-Radio%20V3%2C%2032-bit%2C%202017-04-30_1930.exe?dl=0

 

Simon Brown, G4ELI
http://sdr-radio.com

 

 


Re: Not Preview 6 (Kit Enclosed)

Simon Brown
 

Thanks,

 

Which radio?

 

Simon Brown, G4ELI
http://sdr-radio.com

 

From: sdr-radio-com@... [mailto:sdr-radio-com@...]
Sent: 01 May 2017 12:09
To: sdr-radio-com@...
Subject: RE: [sdr-radio-com] Not Preview 6 (Kit Enclosed)

 

 

Went back to 5A just after sending report.

 

Reinstalled Not Preview 6 to take a screenshot and CW appears to be working FB now

 

David - G4PNX


Bandwidth changes Reading

Bernard Malet
 

Dear Simon,

Why Bandwidth changes Reading
This problem occurs for the following bandwidths: 7.5 MHz, 15 MHz, 30 MHz, 50 MHz, 80 MHz
See PDF document attached

Bernard