Simon,

My up/down/left/right arrows stop working (no effect on frequency anymore) if I change any of the settings in the Receive DSP panel (Filter bandwidth, Mode, Squelch, etc.).  However, if I stop then restart the bandscope/waterfall (using the Stop/Start buttons) the up/down/left/right arrows start working again.

It's certainly no show-stopper, just thought I'd mention it.

Here's a screenshot if that's of any value:

https://drive.google.com/open?id=0B77dlHbMDWmJTG80ODFSd0t3X0E

Best regards,

Mark  KF5VQY

I cannot download from any of the sources.
I get this error:

Hi Simon,

I cannot download from any of the sources.

I get this error:

Server Error in '/' Application.

---

Runtime Error

Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine. 

Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<!-- Web.Config Configuration File -->

<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>

Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<!-- Web.Config Configuration File -->

<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>

73, Alex - DH2ID

Hi -

Simon's new public preview of V3 as of June 16th has two more exciting features:

• “Signal History” takes the signal strength of the given bandwidth each 50 milliseconds, which can be saved in a CSV file. It is also shown in three different speeds on a display.
• “Receivers’ Pane” shows up to six combos of spectrum/spectrogram of the complete up to 24 parallel demodulators (they additionally can be shown in the Matrix, as in former versions).

“Signal History” offers many applications, to name just three:

• analyze fading and its structure with an unsurpassed time resolution of 50 ms
• document fade-in and fade out
• measure signal-to-noise ratio of signals

As an First Aid, I have written a PDF of 19 pages with 36 instructive Figures. There you find a step-by-step introduction plus numerous example on how to use this valuable tool in practice: https://goo.gl/CY6eAF

Thanks once again, Simon, for your most valuable work: Nils, DK8OK