|
Would it be possible to reduce the size of recorded data file
Mark Cayton <mcayton@...>
Simon,
If the operator could select an option to record only the visible bandwidth in the session window (instead of the entire receiver bandwidth), it would make the resulting recorded file size much smaller in many cases. Would that perhaps be an option at some point in the future? Thank you for everything you do, Mark KF5VQY |
|
|
|
Re: Another Airspy HF+
rbuck@...
Ditto Paul Goelz comments
toggle quoted message
Show quoted text
My RSP2 is far from disappointing on HF. Propagation conditions are still iffy on the HF bands these days but when they open up a bit, the RSP2 + SDR Console is a real treat. Randall ----- Original Message -----
From: "Paul Goelz" <pgoelz@...> To: "main" <main@SDR-Radio.groups.io> Sent: Friday, November 3, 2017 5:00:19 AM Subject: Re: [SDR-Radio] Another Airspy HF+ At 11:08 PM 11/2/2017, you wrote: I quickly sold my RSP1 and RSP2, very disappointing on HF, both inOut of curiosity, what did you find "very disappointing" about the RSP2 on HF? I could not be happier with mine. Other than some very minor aliasing, I find it has no bad habits at all. I am still trying to figure out what all the fuss is about over the Airspy HF+. I can see where on paper, it is a superior design. But in the real world connected to a real antenna and tuning the HF bands, I fail to see how it will make my life better than it is now with the RSP2. Paul Paul Goelz Rochester Hills, MI pgoelz@... www.pgoelz.com |
|
|
|
Re: Audio problem with x-fi titanium + SDR-Console v3 in Windows 10.
mattiashawee@...
Hi again..
Ok, the computer im using is an Intel Q6600 Quad, with 8GB memory, x-fi titanium soundcard and a GeForce 460 GTX I also attach the logfile. /M |
|
|
|
Re: Audio problem with x-fi titanium + SDR-Console v3 in Windows 10.
Hi,
Please see Problem on http://www.sdr-radio.com/Support - thanks.
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of mattiashawee@...
Hi all. |
|
|
|
IQ File splitter
Mark Pettifor
Is there a way to split recorded IQ files into smaller segments using SDR-Console? I had the default file size set to 2GB for a while, now I've set it to 1GB. I want to go back to ones recorded at 2Gb size and split them into 1GB segments.
Is that something that File Analyzer can (or could) do? Is the File Analyzer still available? I think that was a tool available in earlier versions, yes? Mark |
|
|
|
Audio problem with x-fi titanium + SDR-Console v3 in Windows 10.
mattiashawee@...
Hi all.
I have installed Windows 10 yesterday and i have a X-FI titanium pci-e in my computer. I also installed the "newest" version of SDR Console v3, .. but when i try to use it the sound is terrible. I trie to change buffer and stuff but it doesent seems to help. Do someone have any ideas. /M |
|
|
|
Re: SDRConsole and DM789
M0ZEH <m0zeh@...>
Try different volumes.
|
|
|
|
Re: Build 940 won't start
Dick Grote
I will go back to 940 and send a screenshot.
I'm pretty certain that the panadaptor operation wasn't a play here since I had reset V3 and hence the external radio wasn't enabled. Dick, K6PBF |
|
|
|
Re: Build 940 won't start
OK,
Please send a screenshot after the radio has started and before you start clicking on things.
Try disabling the panadapter?
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Dick Grote via Groups.Io
I've had a few instances when V3 wouldn't start with earlier builds and was able to reset out of the issue. After a few days of operation on 940, I got to the point where it locked up and there was nothing I could do to enable a reset. I start the program, pick my radio, and then the display looks fine until I click on anything. At this point the Windows activity circle starts rotating and after few seconds the screen dulls. I then can't close the program anyway other than restarting the computer. I used the Restart Utility to clear the registry and User Ident0 files, clicked reset on the utility and V3 immediately does the same thing. It won't start. After fooling around for an hour or so, I went back to build 845 and V3 started immediately and has been rock solid for several days. |
|
|
|
LimeSDR Transmit
tblake84@...
Hey Simon,
Just wondering what the development roadmap looks like for transmit functionality with the LimeSDR? I have been using SDRangel to test this out for now but SDR Console is so much better and am anxiously awaiting the release of this capability. Thanks, Tim |
|
|
|
Re: Build 940 won't start
ww6rb
Exactly the symptoms here, tho the cause may be different. We killed the program with [CTL ALT DEL] to bring up Task Manager. Once Task Manager was open we observed the RAM usage heading for the sky before we shut down V3. This was one win7 machine only... the only one with the NVIDIA gtx750. All eight others here are just fine. Most, but not all, are win10. Btw, our current 'shiny object' here is the MINIX-pro x64 with no moving parts. We added a microSD chip and are deploying it in go-kits and as remote RMS gateways for Winlink and as our video conference server on our private, countywide Ubiquity LAN. It has four USB ports, HDMI, and an actual ethernet port. It runs the sdrplay under V3 up to 2 MHz span... and IT RUNS ON 12VDC! via cell -------- Original message --------
From: "Dick Grote via Groups.Io" <dick_grote@...> Date: 11/3/17 10:12 AM (GMT-08:00) To: main@SDR-Radio.groups.io Subject: [SDR-Radio] Build 940 won't start I've had a few instances when V3 wouldn't start with earlier builds and was able to reset out of the issue. After a few days of operation on 940, I got to the point where it locked up and there was nothing I could do to enable a reset. I start the program, pick my radio, and then the display looks fine until I click on anything. At this point the Windows activity circle starts rotating and after few seconds the screen dulls. I then can't close the program anyway other than restarting the computer. I used the Restart Utility to clear the registry and User Ident0 files, clicked reset on the utility and V3 immediately does the same thing. It won't start. After fooling around for an hour or so, I went back to build 845 and V3 started immediately and has been rock solid for several days. I'm running on a Win7, 64 bit using RSP1 as a panadaptor. I leave V3 running all the time during the day. I can sit tight as things are fine for me with 845, but if there is any information that I provide or further tests I can run, I'm very happy to do this. 73, Dick Grote K6PBF |
|
|
|
SDR-Radio V3, 64-bit, 2017-11-01_1101
Bernard Malet
That happiness, Simon, thank you for all the new improvements of your program
The ELAD FDM-S2 responds very well Windows 10, Version 1709 (operating system version 16299.19) SDR-Radio V3, 64-bit, 2017-11-01_1101.exe · 117.06 MB Computer Processor: OctalCore Intel Core i7-5960X Extreme Edition, 3500 MHz (35x100) Motherboard: Asus X99-Deluxe (1 PCI-E x4, 5 PCI-E x16, 1 M.2, 8 DDR4 DIMM, Audio, Dual Gigabit LAN, WiFi) Motherboard Chipset: Intel Wellsburg X99, Intel Haswell-E Memory system: 32 680 MB (DDR4-2133 DDR4 SDRAM) USB3: 8 ports USB2: 8 ports Video card: NVIDIA GeForce GTX Black TITAN (6 GB) Monitor: Iiyama ProLite 2773H [27 "LCD] Sound card: Creative Sound Blaster CAO132 Zx |
|
|
|
Re: Dramatic slowness when loading v3 (and others)
Patrick
Thanks for your comments Ignacio, so problem solved !
Now I have to understand why the boot is that long (1 minute running a SSD, hum, there must be something wrong, once again ...). |
|
|
|
Build 940 won't start
Dick Grote
I've had a few instances when V3 wouldn't start with earlier builds and was able to reset out of the issue. After a few days of operation on 940, I got to the point where it locked up and there was nothing I could do to enable a reset. I start the program, pick my radio, and then the display looks fine until I click on anything. At this point the Windows activity circle starts rotating and after few seconds the screen dulls. I then can't close the program anyway other than restarting the computer. I used the Restart Utility to clear the registry and User Ident0 files, clicked reset on the utility and V3 immediately does the same thing. It won't start. After fooling around for an hour or so, I went back to build 845 and V3 started immediately and has been rock solid for several days.
I'm running on a Win7, 64 bit using RSP1 as a panadaptor. I leave V3 running all the time during the day. I can sit tight as things are fine for me with 845, but if there is any information that I provide or further tests I can run, I'm very happy to do this. 73, Dick Grote K6PBF |
|
|
|
Re: Dramatic slowness when loading v3 (and others)
Siegfried Jackstien
antivirus soft active?? dg9bfc sigi Am 03.11.2017 um 15:19 schrieb Patrick:
No NVDIA card Ray, this is an integrated AMD Radeon R7 (with latest drivers installed) that does not support CUDA but the problem also occurs when loading other SDR programs such as Elad SW2 (native program of my SDR, 52" to load !), or Studio 1 as well. This is not a specific issue I have when running v3. |
|
|
|
Re: Dramatic slowness when loading v3 (and others)
EB4APL
Hi, I have a similar problem in my wife's PC: the front panel USB 2 ports are slower than the rear ones. Even I get a message when starting a copy from a USB memory that says something like: the copy will be slow in this port, use a faster port. Maybe some of these ports are mean for mice or headphones. 73 de Ignacio, EB4APL El 03/11/2017 a las 17:35, Patrick
escribió:
Thanks Peter, I have no other choice. |
|
|
|
Re: Dramatic slowness when loading v3 (and others)
Properly connected / Correct drivers!
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Patrick
Thanks Peter, I have no other choice. |
|
|
|
Re: Dramatic slowness when loading v3 (and others)
Patrick
Thanks Peter, I have no other choice.
But I don't understand what the issue is ... if the front USB ports were not 'connected' to the motherboard, the programs wouldn't start at all ? This is puzzling me ! |
|
|
|
Re: Dramatic slowness when loading v3 (and others)
Alan G4ZFQ
I indeed have both 2.0 and 3.0 on front.Why not use an extension? It has often been noted that all USB ports are not the same. Maybe a different internal hub or something else on that hub slowing it down but some simply act differently. 73 Alan G4ZFQ |
|
|
|
Re: Dramatic slowness when loading v3 (and others)
Peter Cumminsky <peterconrad@...>
One thing you could do if you need "Front" side access is to use a USB extension cable (USB Male-to-Female) cable from the rear port long enough to reach where it needs to go but no longer. Put some snap-on magnetic "cores" on it to reduce "noise" and it should do the job.
- Peter Conrad Cumminsky: <peterconrad@...> - My Homepage: [http://peterconrad.tripod.com] - "The Gods do not subtract, from man's allotted time, - the hours spent in sailing." - anonymous |
|
|