|
Re: Kit: November 11th, 2017
Hi,
The visible span will be (should be) the same value shown when you previously closed the program.
What I really need is a screenshot before you close the program, a screenshot after you open the program. I looked at your logfile and don’t see anything obvious.
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of David - G4PNX via Groups.Io
Morning Simon...still have the issue of Span defaulting to 76.800 on startup as in previous version...you have screen shot but can send another if required. |
||
|
|
||
|
Re: Kit: November 11th, 2017
David - G4PNX <david.painter@...>
Morning Simon...still have the issue of Span defaulting to 76.800 on startup as in previous version...you have screen shot but can send another if required.
David - G4PNX |
||
|
|
||
|
Re: Get a new kit this version has expired
richardperks95@...
Thanks very much Simon
|
||
|
|
||
|
Kit: November 11th, 2017
Hi All,
For those in this group – here’s an updated kit. The test team have played with it, for me the big improvement is Narrow FM now working properly (!) and lower stutter when many receivers are enabled.
http://www.sdr-radio.com/Software/Downloads/November11th,2017
Simon Brown, G4ELI
www.dxgalaxy.com
|
||
|
|
||
|
Re: Sdr Console and DsD plus
Hi,
Also big thanks from me, I’ve added a DSDPlus page: http://www.sdr-radio.com/Software/3rd-Party/DSDPlus using info from this thread.
In today’s kit Narrow FM is fixed – I have the de-emphasis wrong – badly wrong (typo).
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Christopher Warren
At last. Made it. Thank you all for your help and feedback. The screenshot did the trick as i could see all the settings. What i did wrong was that i set the mode to NFM and not WFM. I could not see the button as it was not selected from the list. Decoding is now 100%. I must also thank the om who first suggested WFM but could not find it at the time. Now I can use SDR Console.
Thanks again. |
||
|
|
||
|
Re: Sdr Console and DsD plus
Christopher Warren <christopherlwarren@...>
At last. Made it. Thank you all for your help and feedback. The screenshot did the trick as i could see all the settings. What i did wrong was that i set the mode to NFM and not WFM. I could not see the button as it was not selected from the list. Decoding is now 100%. I must also thank the om who first suggested WFM but could not find it at the time. Now I can use SDR Console. Thanks again. |
||
|
|
||
|
Re: FW: [airspy] Airspy HF+ pre-orders are open!
Patrick
Hi buddies, Though I tried as soon as I got the info (with a login), no coupon for me neither but an "invalid" message. Bad luck ... Patrick |
||
|
|
||
|
Re: Get a new kit this version has expired
Downloads are on the website, also I’ll be posting a kit in this group today.
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of richardperks95@...
I successfully installed back in February this year and now I just went back to use my SDR Play RSP2 with SDR Console V3 and got the message "Get a new kit, this version has expired, bye" - Can anyone advise what I need to do to get myself back to where I used to be i.e. enjoying the SDRPlay with SDR Console V3 please. |
||
|
|
||
|
Get a new kit this version has expired
richardperks95@...
I successfully installed back in February this year and now I just went back to use my SDR Play RSP2 with SDR Console V3 and got the message "Get a new kit, this version has expired, bye" - Can anyone advise what I need to do to get myself back to where I used to be i.e. enjoying the SDRPlay with SDR Console V3 please.
|
||
|
|
||
|
Re: FW: [airspy] Airspy HF+ pre-orders are open!
drew231955
I was up early in Australia. Had no joy with coupon. Have received shipping information, so it is on the way. New toy for next week. Drew VK4ZXI
|
||
|
|
||
|
Re: FW: [airspy] Airspy HF+ pre-orders are open!
agene
Hi Kevin, There were only a very limited number of coupons available, 100 from Itead and 50 from the U.S. Dealer, if you were not in the first few you did not get in. Unfortunately the release was during the night Australian time and by the time I got out of bed this morning, everything was gone... Don't think I will get one in any case, I don't think it covers the wide bandwidth like the original Airspy and the RSP2 I already have.
Regards, Mike Simpson
Penrith, NSW, Australia
http://www.rstools.info |
||
|
|
||
|
Re: FW: [airspy] Airspy HF+ pre-orders are open!
F. Kevin Feeney
I've tried with two browsers on 3 computers on two different networks. It always comes up coupon invalid. I've cut and pasted and tried typing in by hand. It just doesn't
like me.
toggle quoted message
Show quoted text
Kevin Sent from my Android phone using TouchDown (www.symantec.com) -----Original Message-----
From: LaValle Laabs [lavallelaabs@...] Received: Friday, 10 Nov 2017, 4:58PM To: main@SDR-Radio.groups.io [main@SDR-Radio.groups.io] Subject: Re: [SDR-Radio] FW: [airspy] Airspy HF+ pre-orders are open! Nope, still getting invalid...
On Fri, Nov 10, 2017 at 3:40 PM, Jean-Philippe DIEL
<zl1rpl@...> wrote:
Beautiful ! Just ordered mine now as well - no issues with coupon. |
||
|
|
||
|
Re: FW: [airspy] Airspy HF+ pre-orders are open!
LaValle Laabs <lavallelaabs@...>
Nope, still getting invalid... On Fri, Nov 10, 2017 at 3:40 PM, Jean-Philippe DIEL <zl1rpl@...> wrote: Beautiful ! Just ordered mine now as well - no issues with coupon. |
||
|
|
||
|
Re: FW: [airspy] Airspy HF+ pre-orders are open!
Jean-Philippe DIEL
Beautiful ! Just ordered mine now as well - no issues with coupon.
toggle quoted message
Show quoted text
73’s ZL1RPL Sent from my iPhone On 11/11/2017, at 09:51, Massimo Mucci via Groups.Io <n5nhj@...> wrote: |
||
|
|
||
|
Re: FW: [airspy] Airspy HF+ pre-orders are open!
Just ordered one, no issues.
toggle quoted message
Show quoted text
---------------------- 73 de Max, N5NHJ (I8NHJ) one of EL2PP, 1A0KM, JT1Y, E30GA, T77V, TT8MM, T32R, K5K, XR0X, S05X, 4O3T, BS7H, K4M, PJ7E, PJ7DX, 6Y1V, C6ANA, VP5/I8NHJ and... Friday, November 10, 2017, 2:27:20 PM, you wrote: Just tried it again, still says it’s invalid for me. I left the Kevin, WB2EMS From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Paul NN4F It shows now, I was just to impatient.... Paul Jones - NN4F Email: paul@... Facebook.com/groups/sdrplay On Fri, Nov 10, 2017 at 2:46 PM, F. Kevin Feeney <fkf1@...> wrote: Yeah, that’s what I figure too. No worries. Still have an RSP to Kevin, WB2EMS From:main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of LaValle Laabs To: main@SDR-Radio.groups.io Same here, guess I'll wait the three to six months when the price will drop... It always does... On Nov 10, 2017 13:12, "F. Kevin Feeney" <fkf1@...> wrote: Guess I was too late, the coupon code was ‘invalid’. Kevin, WB2EMS From:main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Jim Smith G0OFE Just ordered mine! ================================ On 10/11/2017 18:19, Simon Brown wrote: FYI Simon Brown, G4ELI www.dxgalaxy.com From:main@airspy.groups.io [mailto:main@airspy.groups.io] On Behalf Of prog Dear Airspy fans, Thank you for your patience and your encouragement. We are pleased Coupon code (log in first to use it): AIRSPYFANS We hope you will enjoy it!
|
||
|
|
||
|
Re: Sdr Console and DsD plus
Hi,
Memory support in the very latest kit, there should be a kit for everyone in this forum tomorrow.
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Christopher Warren
Hi all . Thank you for all your replies. At least I know it is not something I am doing wrong.
At the moment I am using a quad core 1.67Ghz processors and 64 bit windows 7. So i may need more umff? To get it working. Btw the repeater is with a mile of my Qth. And i have already made it work with SDR#. But i really wished it would work with SDR Console which i prefer.
Whilst I am on the subject. I downloaded ver3 and I cannot find the memory icon, which according to the manual is next to the favourites icon. Has it moved?
Thanks again. De Chris.
|
||
|
|
||
|
Re: FW: [airspy] Airspy HF+ pre-orders are open!
F. Kevin Feeney
Just tried it again, still says it’s invalid for me. I left the cart open for about 5 minutes and tried over and over. No joy.
Kevin, WB2EMS
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io]
On Behalf Of Paul NN4F
Sent: Friday, November 10, 2017 2:52 PM To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] FW: [airspy] Airspy HF+ pre-orders are open!
It shows now, I was just to impatient....
On Fri, Nov 10, 2017 at 2:46 PM, F. Kevin Feeney <fkf1@...> wrote:
|
||
|
|
||
|
Re: FW: [airspy] Airspy HF+ pre-orders are open!
Paul NN4F
It shows now, I was just to impatient.... On Fri, Nov 10, 2017 at 2:46 PM, F. Kevin Feeney <fkf1@...> wrote:
|
||
|
|
||
|
Re: FW: [airspy] Airspy HF+ pre-orders are open!
F. Kevin Feeney
Yeah, that’s what I figure too. No worries. Still have an RSP to play with. And waiting on the Anan 200D support, that will be fun when it comes. Things to look forward to.
Kevin, WB2EMS
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io]
On Behalf Of LaValle Laabs
Sent: Friday, November 10, 2017 2:18 PM To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] FW: [airspy] Airspy HF+ pre-orders are open!
Same here, guess I'll wait the three to six months when the price will drop... It always does...
On Nov 10, 2017 13:12, "F. Kevin Feeney" <fkf1@...> wrote:
|
||
|
|
||
|
Re: FW: [airspy] Airspy HF+ pre-orders are open!
LaValle Laabs <lavallelaabs@...>
Same here, guess I'll wait the three to six months when the price will drop... It always does... On Nov 10, 2017 13:12, "F. Kevin Feeney" <fkf1@...> wrote:
|
||
|
|
