|
Re: Kit: November 11th, 2017 *** SDRPlay ***
Carl Moreschi <n4py3@...>
VCRuntime140.dll solved the problem. Thanks so much Simon.
toggle quoted message
Show quoted text
73, Carl Moreschi N4PY 58 Hogwood Rd Louisburg, NC 27549 www.n4py.com On 11/11/2017 12:09 PM, Simon Brown wrote:
OK, |
|
|
|
Kit: November 11th, 2017 *** SDRPlay ***
OK,
If you have problems with the SDRplay RSP1 or RSP2 then you *must* install the runtime below. I have tested on a Windows 7 32-bit system and can confirm that VCRuntime140.dll is required.
https://www.microsoft.com/en-us/download/details.aspx?id=52685
I will update the Download page.
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Simon Brown
Sent: 11 November 2017 08:47 To: main@SDR-Radio.groups.io Subject: [SDR-Radio] Kit: November 11th, 2017
Hi All,
For those in this group – here’s an updated kit. The test team have played with it, for me the big improvement is Narrow FM now working properly (!) and lower stutter when many receivers are enabled.
http://www.sdr-radio.com/Software/Downloads/November11th,2017
Simon Brown, G4ELI
www.dxgalaxy.com
|
|
|
|
Re: Kit: November 11th, 2017
Noel
Hi Simon
Same issue in W8.1 64-bit. The new Nov 11 kit doesn't start the RSP2. Previous version, Oct 23 was fine. Regards Noel. |
|
|
|
Re: V3 October build: Can't Select File For Playback
Bjarne Mjelde
Apparently not an issue with the November release!
-- Bjarne Mjelde arcticdx.blogspot.com Remote rx: kongsdr.proxy.kiwisdr.com:8073/ |
|
|
|
Re: Kit: November 11th, 2017
OK,
toggle quoted message
Show quoted text
Looks like the new MIRICS DLL doesn't work on Windows 7 - I will investigate this. Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com -----Original Message-----
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Carl Moreschi Sent: 11 November 2017 13:02 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Kit: November 11th, 2017 Hi Simon, I installed this kit today. It does not work at all with my SDRplay RSP1. The log file shows the DLL failed for this radio. I am running Windows 7 64 bit. The Oct 23 version does work. Running the 64 bit version in both cases. 73 Carl Moreschi N4PY 58 Hogwood Rd Louisburg, NC 27549 www.n4py.com On 11/11/2017 3:47 AM, Simon Brown wrote: Hi All, |
|
|
|
V3 October build: Can't Select File For Playback
Bjarne Mjelde
When I select Open, and I choose to search for a file instead of opening one, V3 seems to want to scan all files in a folder, ending up with stuttering. The program doesn't respond to commands, so in the end I have to hard close it. It was rather difficult to explain in words so I made an mp4 to illustrate. Downloadable/runable from https://www.dropbox.com/s/5rpje8mc9j1k8wq/V3%20Playback.mp4?dl=0
-- Bjarne Mjelde arcticdx.blogspot.com Remote rx: kongsdr.proxy.kiwisdr.com:8073/ |
|
|
|
Re: Kit: November 11th, 2017
Adam Meredith-Jones
I had the same SDR Play DLL problem, I then followed the suggested route to delete both the 2.10 and 2.xx versions then reinstalled today's kit. I got the logfle entry for DLL failed as follows:
15:56:23.292: Select Radio> Initialising
15:56:23.293: Select Radio> ------------
15:56:23.293: Select Radio> Parent class .: CMainFrame
15:56:23.294: Select Radio> -
15:56:23.294: SDRplay
15:56:23.294: Select Radio> Connecting
15:56:23.294: Select Radio> ----------
15:56:23.295: Select Radio> Address ....: 1603010400
15:56:23.295: Select Radio> Model ......: SDRplay RSP2
15:56:23.295: Select Radio> Serial .....: 1603010400
15:56:23.296: Select Radio> Port .......: 0
15:56:23.297: Select Radio> Soundcard ..:
15:56:23.297: Select Radio> Parent wnd .: 000D0220
15:56:23.297: Select Radio> Bandwidth ..: 500000
15:56:23.298: Select Radio> Frequency ..: 7100000
15:56:23.298: Select Radio> PPM ........: 0
15:56:23.298: Select Radio> Converter ..: 0
15:56:23.298: Select Radio> Swap IQ ....: 0
15:56:23.299: Select Radio> -
15:56:23.299: Select Radio> Connect frequency 7100000 = 7100000 + 0 (PPM)
15:56:23.299: Radio SDRplay: MIRICS> LoadDll failed
15:56:23.299: Select Radio> Status .....: Failed I downloaded the current version of SDR Uno; that works fine (and reminded me why I prefer SDR Console!) Any ideas anyone? Sorry Gaute, I was hopeful you'd cracked the problem. Adam M6JOM |
|
|
|
Re: Kit: November 11th, 2017
Updated.
Running fine with Arspy R2 Win10 64 bits Waiting now for NOAA 19 :-) |
|
|
|
Re: Kit: November 11th, 2017
Mike Bott <mike_bott@...>
I had to dig out my SDRplay RSP1, but it is functioning just fine alongside the RSP2 with the 11/11 Preview. Windows 10 64-bit.
toggle quoted message
Show quoted text
-- Mike On 11/11/2017 08:02 AM, Carl Moreschi wrote:
Hi Simon, |
|
|
|
GM4CXF HF+ on VHF
paul newcombe <G6YZC@...>
I look forward to hearing how it performs on VHF. One big problem for me is that APRS is on 144.390 and can be a pain when trying to hear signals on 2m EME when there is a local with an APRS saying "Yep still parked on the drive" every few minutes.
Paul N2EME From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Jim T <gm4cxf@...>
Sent: Saturday, November 11, 2017 8:12 AM To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] FW: [airspy] Airspy HF+ pre-orders are open! I've ordered one as well. Tried almost as soon as it was announced but, no discount success here either.
Looking forward to a significant improvement on vhf in terms of intermod issues. Specifically interested in aircraft band which is hammered by strong out of band signals here. Mind you, the SDR dongle I'm using has no front end filtering built in. Just need to be patient ... |
|
|
|
Re: FW: [airspy] Airspy HF+ pre-orders are open!
Jim T
I've ordered one as well. Tried almost as soon as it was announced but, no discount success here either.
Looking forward to a significant improvement on vhf in terms of intermod issues. Specifically interested in aircraft band which is hammered by strong out of band signals here. Mind you, the SDR dongle I'm using has no front end filtering built in. Just need to be patient ... |
|
|
|
Re: Kit: November 11th, 2017
Installed the v3 new kit on Nov 11 build 959 today. I can start the programme but cannot start my SDRPlay RSP2. I closed SDR Console and then my Windows system crashed and become blue screen (the BSoD phenomenon) several minutes later,
I am using Windows 7 32-bit. The log file shows the following lines which may indicate potential causes of problems: 20:55:59.166: Select Radio> 20:55:59.206: Select Radio> Initialising 20:55:59.206: Select Radio> ------------ 20:55:59.206: Select Radio> Parent class .: CMainFrame 20:55:59.206: Select Radio> - 20:55:59.206: SDRplay 20:55:59.206: Select Radio> Connecting 20:55:59.206: Select Radio> ---------- 20:55:59.206: Select Radio> Address ....: xxxxxxxx 20:55:59.206: Select Radio> Model ......: SDRplay RSP2 20:55:59.206: Select Radio> Serial .....: xxxxxxxx 20:55:59.206: Select Radio> Port .......: 0 20:55:59.206: Select Radio> Soundcard ..: 20:55:59.206: Select Radio> Parent wnd .: 000302DA 20:55:59.206: Select Radio> Bandwidth ..: 2048000 20:55:59.206: Select Radio> Frequency ..: 157024134 20:55:59.206: Select Radio> PPM ........: 0 20:55:59.206: Select Radio> Converter ..: 0 20:55:59.206: Select Radio> Swap IQ ....: 0 20:55:59.206: Select Radio> - 20:55:59.206: Select Radio> Connect frequency 157024134 = 157024134 + 0 (PPM) 20:55:59.206: Radio SDRplay: MIRICS> LoadDll failed 20:55:59.206: Select Radio> Status .....: Failed 20:56:01.506: OnSysCommand: nID 0000F012 SC_MOVE, lParam 000F0424 Is it the case that some .dll file is missing or outdated? |
|
|
|
Re: Kit: November 11th, 2017
Carl Moreschi <n4py3@...>
Hi Simon,
toggle quoted message
Show quoted text
I installed this kit today. It does not work at all with my SDRplay RSP1. The log file shows the DLL failed for this radio. I am running Windows 7 64 bit. The Oct 23 version does work. Running the 64 bit version in both cases. 73 Carl Moreschi N4PY 58 Hogwood Rd Louisburg, NC 27549 www.n4py.com On 11/11/2017 3:47 AM, Simon Brown wrote:
Hi All, |
|
|
|
Re: Kit: November 11th, 2017
David - G4PNX <david.painter@...>
Gaute...many thanks for the suggestion...thats the problem with so many choices...my brain goes into a loop!!!
73 David - G4PNX |
|
|
|
Re: Sdr Console and DsD plus
Christopher Warren <christopherlwarren@...>
Simon, That goes without saying. As always you have given us a superb piece of software. Which gets better with every upgrade. I first used your digi software during the early days, when I was using the then standard Digipan, and convinced our club to try HRD instead. I will download this new feature for sure. Thanks Chris de 9H1BW. |
|
|
|
Re: Kit: November 11th, 2017
gautea@...
Hi guys. Strange.....I always get +- 96Khz when restarting the Console, unless of course if I have changed the setting manually first.
I would recommend David to use the Zoom slider rather than the Bottom slider to change visual BW. I only use the Bottom slider for shifting the selected BW up and down. If you do shift between 192kHz and 200Hz often, I do recommend creating Favourites for each setting. Theese may be organized in Groups and Folders as desired. Have a nice weekend, LB6YD Gaute |
|
|
|
Re: Kit: November 11th, 2017
David - G4PNX <david.painter@...>
Many thanks ...thought it was senility creeping in!!
David |
|
|
|
Re: Kit: November 11th, 2017
Yes,
It does. Looks like I set the bandwidth to 80% of the radio’s sample rate in this situation. I’ll relax his to 90% now, thanks for the help.
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of David - G4PNX via Groups.Io
Simon...this may be user induced...I usually change the span (using the bottom slider) so that it shows a span of 200Khz ie the span will show + or - 100Khz |
|
|
|
Re: Kit: November 11th, 2017
David - G4PNX <david.painter@...>
Simon...this may be user induced...I usually change the span (using the bottom slider) so that it shows a span of 200Khz ie the span will show + or - 100Khz
If I then close the program and restart the span will default to 76.800Khz. However if I manually set the span using the slider control to say + or - 95Khz then it restarts correctly and the span will show that value (95Khz). so it seems that if the user manually sets a value exceeding the bandwidth setting ...in my case 192Khz for the FCDP+ the span will default to 76.800 when the program is restarted. I have duplicated this several times. Does that make sense to you. David |
|
|
|
Re: Kit: November 11th, 2017
David - G4PNX <david.painter@...>
As requested.
David |
|
|