|
Re: SDRc V3 and MMTTY
David De Coons
RTTY signals are on LSB. Since your radio is on USB is why you need REV.
toggle quoted message
Show quoted text
Dave wo2x Sent from my iPad On Nov 11, 2017, at 11:49 PM, n0kk@... wrote:
|
|
|
|
Re: SDRc V3 and MMTTY
Kirk, N0KK
With more playing around I was able to get MMTTY to decode signals sent via VAC.
It seems that the REV function needs to be turned on to decode... Ive never had to use reverse before so it did not dawn on me to try that. 50% there. Now to find a way to TX and Im off and running. |
|
|
|
Re: Cloud IQ with latest V3
Jack L. Metcalfe <jlmetcalfe@...>
John Fonseca wrote: Likewise here. Cloud IQ working perfectly with the new kit. Also running Win 10 64. New kit does start faster, by the way.--- I just got a chance to install the new version on my primary i7 computer. I installed over the older kit installation & everything is working perfectly, as far as I can tell. I'll install the same way on my i5 tomorrow, if I have time. Both computers have access to Cloud-IQ radios on my LAN & both computers are running 64 bit versions of Windows 10 Pro. |
|
|
|
Re: Kit: November 11th, 2017 *** SDRPlay ***
Peter
So - the console is 'so small' because it's all the screen space I'm giving it ... I have other screens I want to see as well ... Hope that helps shed some light on the mystery |
|
|
|
Re: FW: [airspy] Airspy HF+ pre-orders are open!
John Fonseca <fonsecanyc@...>
Just ordered mine.
I wonder how how it will compare with my CloudIQ, which I use as a panadapter/alternate receiver to my 7600 (mostly use SDR receive at this point). Im quite happy with the CloudIQ but I couldn’t resist ordering after reading Simon’s positive comments on the HF+ pre prod units. |
|
|
|
Re: Cloud IQ with latest V3
John Fonseca <fonsecanyc@...>
Likewise here. Cloud IQ working perfectly with the new kit. Also running Win 10 64. New kit does start faster, by the way.
John |
|
|
|
Re: Cloud IQ with latest V3
Bjarne Mjelde
Newest V3 running effortlessly with Cloud-IQ here. Win10-64, but I haven't set up a new PC for that, just installed the November V3.
-- Bjarne Mjelde arcticdx.blogspot.com Remote rx: kongsdr.proxy.kiwisdr.com:8073/ |
|
|
|
Cloud IQ with latest V3
HERB KEATON N2GEW
I am trying to set-up an ACER laptop w Windows 7, 64. The specs seem OK
I already have a Windows 7 machine running V2 and Windows 10 running laptop on the previous version of V3. With the newest V3 on the ACER, I was unable to "detect" the Cloud IQ via search function, so I went to configure this manually. I noticed there was an option for "Cloud IQ "in the radio setup function. So I tried to attach my Cloud-IQ, but eventually got the message that it had to be defined as either NetSDR or SDR-IP. I cannot get the program to start the Cloud IQ as I get a time out (5-seconds). And that using either NetSDR or SDR-IP which are the only options I see. Has anyone "been there, done that"? Herb |
|
|
|
Re: Strange behavior after running calibrate
Carl Moreschi <n4py3@...>
Hi Simon,
toggle quoted message
Show quoted text
Here's a screen shot that just happened. Actually calibrate was not needed. I send 14.200 from my program and SDRConsole went here fine. I then clicked my band button for 18 khz, and all was fine. I then clicked my band button for 21.221 mhz and got the attached screen shot. So apparently SDFRplay went to 21.221 for RX 1 and the display is still showing 18 mhz. Thanks for looking into this. Carl Moreschi N4PY 58 Hogwood Rd Louisburg, NC 27549 www.n4py.com On 11/11/2017 5:02 PM, Simon Brown wrote:
Carl, |
|
|
|
Start up...
Calder Latham
This is not a new issue...has been this way for a while. If I start SDR Console and the radio is on a different frequency than the console was previously on I end up with two different frequencies displayed. This is with the SDR radio tracking parallel to the real radio using the same antenna.
Screen short included of course...Thanks for all your Great work. Cal...W1HHO All the Best. From the woods of Maine. |
|
|
|
Re: Kit: November 11th, 2017 *** SDRPlay ***
Hi,
I’m stumped. Out of interest, why is the console so small? What happens if you run with a bigger, full screen window?
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Peter via Groups.Io
Hi Simon, |
|
|
|
Re: Strange behavior after running calibrate
Carl,
toggle quoted message
Show quoted text
Can you explain this with screenshots please? Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com -----Original Message-----
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Carl Moreschi Sent: 11 November 2017 20:13 To: main@SDR-Radio.groups.io Subject: [SDR-Radio] Strange behavior after running calibrate Hi Simon, My SDRplay was a little off frequency so I pulled up the calibrate screen. All worked well. However, after running calibrate, the displayed panadapter and waterfall for receiver 1 would not follow what band I was on. I could switch to a different band and the receiver was working there but the display was still centered on the previous band. It looks like some setting is not cleared after a calibrate. I exited and restarted and all was well. Thanks and 73, Carl Moreschi N4PY 58 Hogwood Rd Louisburg, NC 27549 www.n4py.com On 11/11/2017 2:29 PM, Ray Lyford wrote: Be sure to have all the DSP Filters off. |
|
|
|
Re: Strange behavior after running calibrate
Thanks.
toggle quoted message
Show quoted text
Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com -----Original Message-----
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Carl Moreschi Sent: 11 November 2017 20:13 To: main@SDR-Radio.groups.io Subject: [SDR-Radio] Strange behavior after running calibrate Hi Simon, My SDRplay was a little off frequency so I pulled up the calibrate screen. All worked well. However, after running calibrate, the displayed panadapter and waterfall for receiver 1 would not follow what band I was on. I could switch to a different band and the receiver was working there but the display was still centered on the previous band. It looks like some setting is not cleared after a calibrate. I exited and restarted and all was well. Thanks and 73, Carl Moreschi N4PY 58 Hogwood Rd Louisburg, NC 27549 www.n4py.com On 11/11/2017 2:29 PM, Ray Lyford wrote: Be sure to have all the DSP Filters off. |
|
|
|
Strange behavior after running calibrate
Carl Moreschi <n4py3@...>
Hi Simon,
toggle quoted message
Show quoted text
My SDRplay was a little off frequency so I pulled up the calibrate screen. All worked well. However, after running calibrate, the displayed panadapter and waterfall for receiver 1 would not follow what band I was on. I could switch to a different band and the receiver was working there but the display was still centered on the previous band. It looks like some setting is not cleared after a calibrate. I exited and restarted and all was well. Thanks and 73, Carl Moreschi N4PY 58 Hogwood Rd Louisburg, NC 27549 www.n4py.com On 11/11/2017 2:29 PM, Ray Lyford wrote:
Be sure to have all the DSP Filters off. |
|
|
|
Re: SDRc V3 and MMTTY
Be sure to have all the DSP Filters off.
What RTTY are you trying to decode.
Have you tried any other software. MultiPSK or Ham Radio Deluxe. They both work very well. Multipsk is free for amateur modes and DWD rtty.
I use Multipsk a lot. It takes a little while to get used to it but it works very well.
Regards Ray.
From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of n0kk@... <n0kk@...>
Sent: 11 November 2017 18:36 To: main@SDR-Radio.groups.io Subject: [SDR-Radio] SDRc V3 and MMTTY Attempting to get MMTTY to decode via SDRC.
Using VAC1 to route audio to MMTTY..Check.. But MMTTY not decoding..I assume Ive got a mode wrong or something.. Can anyone shed light on this? Kirk, N0KK |
|
|
|
Re: SDRc V3 and MMTTY
What mode are you using? Screenshot maybe?
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of n0kk@...
Attempting to get MMTTY to decode via SDRC. |
|
|
|
SDRc V3 and MMTTY
Kirk, N0KK
Attempting to get MMTTY to decode via SDRC.
Using VAC1 to route audio to MMTTY..Check.. But MMTTY not decoding..I assume Ive got a mode wrong or something.. Can anyone shed light on this? Kirk, N0KK |
|
|
|
Re: Kit: November 11th, 2017 *** SDRPlay ***
Peter
Hi Simon,
W7/64 here , VCRuntime140.dll installed ; with my RSP2, I note an occasional anomaly - clicking on Bandwidth in the top ribbon brings up a pop-up with the text ' Dummy ' in it, ( see attached ) clicking on bandwidth a 2nd time can cause one of three outcomes ... 1. the bandwidth selection appears correctly, and then works, or 2. a Windows pop-up appears saying the program has stopped working, or 3, most of the SDR GUI vanishes, leaving the top ribbon and the 'Please Wait ... ' associated with SDR exiting with error. Other than that, seems to be working ok. Cheers, Pete. |
|
|
|
Re: V3 October build: Can't Select File For Playback
Hi,
It always helps if you quote the original post, please?
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Bjarne Mjelde
Disregard previous post. There is a real issue with the playback dialog box, related to a previously posted problem about saving to the root of a drive (any drive). |
|
|
|
Re: V3 October build: Can't Select File For Playback
Bjarne Mjelde
Disregard previous post. There is a real issue with the playback dialog box, related to a previously posted problem about saving to the root of a drive (any drive).
-- Bjarne Mjelde arcticdx.blogspot.com Remote rx: kongsdr.proxy.kiwisdr.com:8073/ |
|
|