|
No start: NVIDIA Windows Kernel Mode 353.06
Nils Schiffhauer
Hi - running rusty Windows 8.1 on a Samsung laptop 700Z, I cannot start SDR Console V3.
The screen flickers, and a message pops up regarding problems with "NVIDIA Windows Kernel Mode 353.06". Then the laptop boots again. No luck in starting V3. No problem with SDR-Consol V2, however. Anyone encountering the same? Thanks & 73: Nils -- 73 Nils, dk8ok.org |
|
|
|
Re: Kit: November 24th, 2017
Yea, thanks.
toggle quoted message
Show quoted text
Taking weekend off from Console UI, playing with NR ideas... Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com -----Original Message-----
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Brendan Wahl Sent: 25 November 2017 02:50 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Kit: November 24th, 2017 Downloaded latest Build 972 (x64) today, and it's running very well with no hitches yet. Upgraded to Win10 r1709 from r1703 just yesterday, no major issues, thanks to the Gods of the Ether, Sky, and SSD's. Brendan WA7HL |
|
|
|
Re: LimeSDR DC Offset
ua9xja@...
Hi, Albert! Yes. DC correction switch you can find them in the "Radio Configuration > Options > DC Offset checkbox". Need restart radio.
73! Vit |
|
|
|
Re: Kit: November 24th, 2017
Brendan Wahl
Downloaded latest Build 972 (x64) today, and it's running very well with no hitches yet. Upgraded to Win10 r1709 from r1703 just yesterday, no major issues, thanks to the Gods of the Ether, Sky, and SSD's.
Brendan WA7HL |
|
|
|
Re: FW: [SDR-Radio] Kit: November 24th, 2017
Mark Cayton <mcayton@...>
RF Gain is fixed for RSP1A/RSP2, thank you very much Simon.
-- Mark KF5VQY |
|
|
|
Re: Kit: November 24th, 2017
Working great with my Elad S-1 and RSP-2 is working as it should
|
|
|
|
Re: LimeSDR DC Offset
Paul, UA9XJA,
With my Lime I always see a (known SDR IQ generated infamous) Spike on the Center Freq. No way to get this spike down (Simon once told me this a Lime issue ( I don’t have this e.g. with My SDRplay) and the only hands-on solution I found using the Satellite module (which is my main interest) is to create a frequency difference between the demodulation frequency and the Center Freq (where my Spike is) of the satellite I wish to track and Telemetry demodulate. This makes me keep away from the ugly Spike distortion.
For obvious reasons in many cases I prefer the SDRplay (also as filtering is/ turns out / seems better as with the wideband Lime.
I’m not sure if this is what you discuss . Plse comment. PS ref : DC correction is ON and conspicuous peak IF DC correction is OFF… Are these V3 buttons ?? If yes where can I find these ?
73 Albert PD0OXW
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Paul NN4F
Sent: 25 November 2017 00:23 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] LimeSDR DC Offset
I found the same, adjusting the gain is about the best you can get, change per bands etc until it levels out, and always tune off the center so to avoid and distortion from the correction algorithm, same if most software for DC, same on my Lime, SDRPlays and RTL's
Paul
On Fri, Nov 24, 2017 at 2:16 PM, <ua9xja@...> wrote: Hi!
|
|
|
|
Re: LimeSDR DC Offset
Paul NN4F
I found the same, adjusting the gain is about the best you can get, change per bands etc until it levels out, and always tune off the center so to avoid and distortion from the correction algorithm, same if most software for DC, same on my Lime, SDRPlays and RTL's Paul On Fri, Nov 24, 2017 at 2:16 PM, <ua9xja@...> wrote: Hi! |
|
|
|
LimeSDR DC Offset
ua9xja@...
Hi!
My LimeSDR has black hole in the center of the scale if DC correction is ON and conspicuous peak IF DC correction is OFF. Can i fine tune the DC Offset and save this to "ini" file for best result? 145.5 MHz for example 73! Vit. RT6M |
|
|
|
Re: Lime sdr not working with version SDR-Radio V3, 64-bit, 2017-11-24_0733
Hi,
Changed to use latest github code with Lime Mini support, but the github code has the normal LimeSDR support removed ☹ .
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Siegfried Jackstien
Sent: 24 November 2017 20:49 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Lime sdr not working with version SDR-Radio V3, 64-bit, 2017-11-24_0733
here same thing (does not work) why did lime suite dll and sdrsourcelime dll change??? dg9bfc sigi
Am 24.11.2017 um 18:48 schrieb Simon Brown:
|
|
|
|
Re: Lime sdr not working with version SDR-Radio V3, 64-bit, 2017-11-24_0733
Siegfried Jackstien
here same thing (does not work) why did lime suite dll and sdrsourcelime dll change??? dg9bfc sigi
Am 24.11.2017 um 18:48 schrieb Simon
Brown:
|
|
|
|
Re: HackRF Tuning Backwards
#hackrf
Nope,
It’s OK, so invert spectrum is the only possibility.
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Simon Brown
Sent: 24 November 2017 20:34 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] HackRF Tuning Backwards #hackrf
Ah,
Let me check.
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Siegfried Jackstien
i and q signals mixed??
Am 24.11.2017 um 19:42 schrieb James Brown:
|
|
|
|
Re: HackRF Tuning Backwards
#hackrf
toggle quoted message
Show quoted text
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Siegfried Jackstien
Sent: 24 November 2017 20:30 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] HackRF Tuning Backwards #hackrf
i and q signals mixed??
Am 24.11.2017 um 19:42 schrieb James Brown:
|
|
|
|
Re: HackRF Tuning Backwards
#hackrf
Siegfried Jackstien
i and q signals mixed?? Am 24.11.2017 um 19:42 schrieb James
Brown:
|
|
|
|
FW: [SDR-Radio] Kit: November 24th, 2017
So,
[This time with kit links]
Windows 10, 32-bit crash – I have added diagnostics which are visible using DebugView http://www.sdr-radio.com/Support/Diagnostics#DebugView so I want to see the DebugView log. FWIW it’s OK on my Windows 10, 32-bit miniPC.
The text I am looking for like this:
[16072] MainFrame.cpp, line 729, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 736, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 747, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 753, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 759, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 766, CMainFrame::OnCreate * [16072] 19:59:50.486: CMyMFCRibbonInfoLoader::Load lpszResID=00000133, lpszResType=0000001C, hInstance=00000000 [16072] 19:59:50.486: CMyMFCRibbonInfoLoader::Load hInstance=A3850000 [16072] 19:59:50.486: CMyMFCRibbonInfoLoader::Load hRsrc=A47AACA0 [16072] 19:59:50.486: CMyMFCRibbonInfoLoader::Load nLength=106986 [16072] 19:59:50.486: CMyMFCRibbonInfoLoader::Load hGlobal=A48507E8 [16072] 19:59:50.575: CMyMFCRibbonInfoLoader::Load bRes=00000001 [16072] MainFrame.cpp, line 772, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 782, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 848, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 859, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 885, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 892, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 896, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 899, CMainFrame::OnCreate *
32-bit: https://www.dropbox.com/s/e7ixhmm4gretab6/SDR-Radio%20V3%2C%2032-bit%2C%202017-11-24_1952.exe?dl=0 64-bit: https://www.dropbox.com/s/xcfecwdg35ttt0w/SDR-Radio%20V3%2C%2064-bit%2C%202017-11-24_1951.exe?dl=0
Simon Brown, G4ELI
www.dxgalaxy.com
|
|
|
|
Kit: November 24th, 2017
So,
Windows 10, 32-bit crash – I have added diagnostics which are visible using DebugView http://www.sdr-radio.com/Support/Diagnostics#DebugView so I want to see the DebugView log. FWIW it’s OK on my Windows 10, 32-bit miniPC.
The text I am looking for like this:
[16072] MainFrame.cpp, line 729, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 736, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 747, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 753, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 759, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 766, CMainFrame::OnCreate * [16072] 19:59:50.486: CMyMFCRibbonInfoLoader::Load lpszResID=00000133, lpszResType=0000001C, hInstance=00000000 [16072] 19:59:50.486: CMyMFCRibbonInfoLoader::Load hInstance=A3850000 [16072] 19:59:50.486: CMyMFCRibbonInfoLoader::Load hRsrc=A47AACA0 [16072] 19:59:50.486: CMyMFCRibbonInfoLoader::Load nLength=106986 [16072] 19:59:50.486: CMyMFCRibbonInfoLoader::Load hGlobal=A48507E8 [16072] 19:59:50.575: CMyMFCRibbonInfoLoader::Load bRes=00000001 [16072] MainFrame.cpp, line 772, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 782, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 848, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 859, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 885, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 892, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 896, CMainFrame::OnCreate * [16072] MainFrame.cpp, line 899, CMainFrame::OnCreate *
Simon Brown, G4ELI
www.dxgalaxy.com
|
|
|
|
Re: HackRF Tuning Backwards
#hackrf
James,
The bar at the bottom controls the radio – this is the visible span/bandwidth, so sliding it to the right will result in the receiver (1, green) moving to the left.
I do recommend using a bigger display.
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of James Brown
Using the latest version 3 I find that the HackRF tunes in reverse. When I slide the bottom bar up band the receiver tunes down band and reverse. I have a video if that would help It tunes fine with a simple RTL receiver |
|
|
|
HackRF Tuning Backwards
#hackrf
Using the latest version 3 I find that the HackRF tunes in reverse. When I slide the bottom bar up band the receiver tunes down band and reverse. I have a video if that would help It tunes fine with a simple RTL receiver |
|
|
|
Re: Lime sdr not working with version SDR-Radio V3, 64-bit, 2017-11-24_0733
Thanks,
This bug is from Lime themselves ☹ .
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of lexa@...
|
|
|
|
Re: Kit: November 24th, 2017
Thanks,
Finally fixed 😊 .
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Mark Cayton
Simon, |
|
|