Date   

Re: New Website Goes Live - {^_^}

Kriss Kliegle KA1GJU
 

Can you return the map and list of servers for the ol' Ver1.5???
Can't tell if all my servers are online unless I remotely connect to three different
netbooks running as servers. One click was way easier than TeamViewer method.

Kriss KA1GJU  


Re: Preview 7 is Available

Simon Brown
 

Hi,

 

*Please* don’t post with a yellow background – it’s hard to read .

 

You said the installation was unsuccessful but it ran for two seconds? If the installation did not finish then you probably did not download the whole program.

 

If you started the Console then look at the support page: http://www.sdr-radio.com/Support

 

  • Full Reset may help
  • What radio did you try?

 

From your previous e-mails I think you may have a problem or two with your computer?

 

Simon Brown, G4ELI

 

http://www.dxgalaxy.com/

http://www.sdr-radio.com/

http://www.sdr-satellites.com

 

 

From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Augusto

Sent: 24 October 2017 10:51

To: main@SDR-Radio.groups.io

Subject: Re: [SDR-Radio] Preview 7 is Available

 

OK, this morning I went back to this.

The old version runs smoothly, v3 build 811 64bit .

I downloaded the last version, tried to install it unsuccessfully.

It runs maybe two seconds, then finishes and stop. No messages, nothing.

I do not remember where to find a log of this installation, to see what happened.

Somebody may indicate me this? Thanks.

73, Augusto I2JJR / HB9TZA

Il 23/10/2017 23:51, Augusto ha scritto:

Thanks Simon G4ELI: issue resolved.

I have used the Tools and repaired all the Redistributables; reinstalled with the file

    SDR-Radio V3, 64-bit, 2017-06-16_2123.exe

The installed v811 runs perfectly and the radio are OK at autostart.

Tomorrow on the morning I'll try to download the last version and install it.

GN dear Friend, TU es 73,

                                                 Augusto I2JJR / HB9TZA 

(5R8JR)

Il 23/10/2017 22:19, Simon Brown ha scritto:

Hi,

 

I have no idea what has happened here. Please install the correct kit - 32-bit or 64-bit.

 

Also, see C++ Redistributables on http://www.sdr-radio.com/Support .

 

Simon Brown, G4ELI

 

http://www.dxgalaxy.com/

http://www.sdr-radio.com/

http://www.sdr-satellites.com

 

 

From: mailto:main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Augusto

Sent: 23 October 2017 19:55

To: mailto:main@SDR-Radio.groups.io

Subject: Re: [SDR-Radio] Preview 7 is Available

 

Thanks.

I lost my old version, that was OK ; the new will not run: no radios found!

I disinstalòled it all, and then reinstalled it: now it want to reinstall a Visual C++ redistributable that's already there, and stops.Microsoft site seems to have that anymore ...

Now I have no SDR 3 installed at all ... Amen.

Will try again tomorrow, maybe.

GN, Augusto HB9TZA

Il 23/10/2017 19:27, Ray Lyford ha scritto:

 

940 is today's buiild i think..

 

Ray

 

________________________________________

From: mailto:main@SDR-Radio.groups.io mailto:main@SDR-Radio.groups.io on behalf of Augusto mailto:hb9tza@...

Sent: 23 October 2017 17:17

To: mailto:main@SDR-Radio.groups.io

Subject: Re: [SDR-Radio] Preview 7 is Available

 

I tried to download the 64b /Ms version; does not run.

Downloaded and tried the 32 , installs OK, and runs a version 3 build 811 on an I5-6600 SSD Desktop with NVIDIA GTX1050 and 2 monitors; OS Windows 10pro,64 ; v.14393 .

Is the v3 build 811 the last one, freshly released?

Thanks.

                     Augusto HB9TZA

 

 

 


Re: Preview 7 is Available

Augusto <hb9tza@...>
 

OK, this morning I went back to this.
The old version runs smoothly, v3 build 811 64bit .
I downloaded the last version, tried to install it unsuccessfully.
It runs maybe two seconds, then finishes and stop. No messages, nothing.
I do not remember where to find a log of this installation, to see what happened.
Somebody may indicate me this? Thanks.
73, Augusto I2JJR / HB9TZA


Il 23/10/2017 23:51, Augusto ha scritto:

Thanks Simon G4ELI: issue resolved.
I have used the Tools and repaired all the Redistributables; reinstalled with the file
    SDR-Radio V3, 64-bit, 2017-06-16_2123.exe
The installed v811 runs perfectly and the radio are OK at autostart.
Tomorrow on the morning I'll try to download the last version and install it.
GN dear Friend, TU es 73,
                                                 Augusto I2JJR / HB9TZA 
(5R8JR)


Il 23/10/2017 22:19, Simon Brown ha scritto:

Hi,

 

I have no idea what has happened here. Please install the correct kit - 32-bit or 64-bit.

 

Also, see C++ Redistributables on http://www.sdr-radio.com/Support .

 

Simon Brown, G4ELI

 

http://www.dxgalaxy.com/

http://www.sdr-radio.com/

http://www.sdr-satellites.com

 

 

From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Augusto

Sent: 23 October 2017 19:55

To: main@SDR-Radio.groups.io

Subject: Re: [SDR-Radio] Preview 7 is Available

 

Thanks.

I lost my old version, that was OK ; the new will not run: no radios found!

I disinstalòled it all, and then reinstalled it: now it want to reinstall a Visual C++ redistributable that's already there, and stops.Microsoft site seems to have that anymore ...

Now I have no SDR 3 installed at all ... Amen.

Will try again tomorrow, maybe.

GN, Augusto HB9TZA

Il 23/10/2017 19:27, Ray Lyford ha scritto:

 

940 is today's buiild i think..

 

Ray

 

________________________________________

From: mailto:main@SDR-Radio.groups.io mailto:main@SDR-Radio.groups.io on behalf of Augusto mailto:hb9tza@...

Sent: 23 October 2017 17:17

To: mailto:main@SDR-Radio.groups.io

Subject: Re: [SDR-Radio] Preview 7 is Available

 

I tried to download the 64b /Ms version; does not run.

Downloaded and tried the 32 , installs OK, and runs a version 3 build 811 on an I5-6600 SSD Desktop with NVIDIA GTX1050 and 2 monitors; OS Windows 10pro,64 ; v.14393 .

Is the v3 build 811 the last one, freshly released?

Thanks.

                     Augusto HB9TZA

 




Re: New Website Goes Live - {^_^}

Simon Brown
 

And,

 

I can’t get at the original link at the moment, can do it this evening unless the authouress has the link handy :)

 

 

From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Mark J Culross
Sent: 24 October 2017 02:52
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] New Website Goes Live

 

Simon:

 

On the new website, under the "Radios / RTL Dongles" section, in the "The Files" section, the [Link] for the assocated files is not yet active . . .

 

Thanks for the excellent software you provide for our use !!

 

Mark J Culross

KD5RXT

 


From: Simon Brown <simon@...>
To: main@SDR-Radio.groups.io
Sent: Monday, October 23, 2017 10:58 AM
Subject: [SDR-Radio] New Website Goes Live

 

Hi All,

 

The newly written www.sdr-radio.com has gone live, lots of text to be added as and when I have time.

 

Simon Brown, G4ELI

 

 

 

 


Re: New Website Goes Live

Simon Brown
 

From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Mark J Culross
Sent: 24 October 2017 02:52
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] New Website Goes Live

 

Simon:

 

On the new website, under the "Radios / RTL Dongles" section, in the "The Files" section, the [Link] for the assocated files is not yet active . . .

 

Thanks for the excellent software you provide for our use !!

 

Mark J Culross

KD5RXT

 


From: Simon Brown <simon@...>
To: main@SDR-Radio.groups.io
Sent: Monday, October 23, 2017 10:58 AM
Subject: [SDR-Radio] New Website Goes Live

 

Hi All,

 

The newly written www.sdr-radio.com has gone live, lots of text to be added as and when I have time.

 

Simon Brown, G4ELI

 

 

 

 


Re: hf band plans

doug
 


On 10/23/2017 11:44 PM, J Cullen wrote:
This is the chart I made up
should print to 2 x a4


 
Could not blow up image to readable size using GIMP. All the test was just blurred, because it did not have enough pixels in the first place.

--doug


hf band plans

J Cullen
 

This is the chart I made up
should print to 2 x a4
 


HF favourites file

J Cullen
 

HI Some of you may have seen a list i made up of the full hf band plan for all service i released last week
 
 
I translated that into a SWconsole v3 favourites file So you have all the different bands a mouse click away
You can just import it into your v3.... Im not sure i can post it to the mailing list, I have tried but if anyone wants a copy pop me an email and i will shoot it back to you
vk2jem@...
 
73 de Jem
VK2JEM


Re: Preview 7 is Available

J Cullen
 

i downloaded the 64bit to wiin10
I only have windows defender. I popped up a security threat warning.
I hit install anyway and all went well 

Sent: Tuesday, October 24, 2017 2:28 PM
Subject: Re: [SDR-Radio] Preview 7 is Available

Must have been a false positive. Full scan shows no problem. Sorry for the false alarm.


-Freeman, N5FPP

On Mon, Oct 23, 2017 at 8:05 PM, Freeman Pascal <analias.nomdeguerre@...> wrote:

I'm not sure if this is a false positive, but I'm getting Windows Defender saying there is a virus in the 64bit installer downloaded using the Google link on the download page.

I'm doing a full scan now.


-Freeman, N5FPP

On Mon, Oct 23, 2017 at 3:51 PM, Augusto <hb9tza@...> wrote:
Thanks Simon G4ELI: issue resolved.
I have used the Tools and repaired all the Redistributables; reinstalled with the file
    SDR-Radio V3, 64-bit, 2017-06-16_2123.exe
The installed v811 runs perfectly and the radio are OK at autostart.
Tomorrow on the morning I'll try to download the last version and install it.
GN dear Friend, TU es 73,
                                                 Augusto I2JJR / HB9TZA 
(5R8JR)


Il 23/10/2017 22:19, Simon Brown ha scritto:

Hi,

 

I have no idea what has happened here. Please install the correct kit - 32-bit or 64-bit.

 

Also, see C++ Redistributables on http://www.sdr-radio.com/Support .

 

Simon Brown, G4ELI

 

http://www.dxgalaxy.com/

http://www.sdr-radio.com/

http://www.sdr-satellites.com

 

 

From: main@SDR-Radio.groups.io [mailto:main@....io] On Behalf Of Augusto

Sent: 23 October 2017 19:55

To: main@SDR-Radio.groups.io

Subject: Re: [SDR-Radio] Preview 7 is Available

 

Thanks.

I lost my old version, that was OK ; the new will not run: no radios found!

I disinstalòled it all, and then reinstalled it: now it want to reinstall a Visual C++ redistributable that's already there, and stops.Microsoft site seems to have that anymore ...

Now I have no SDR 3 installed at all ... Amen.

Will try again tomorrow, maybe.

GN, Augusto HB9TZA

Il 23/10/2017 19:27, Ray Lyford ha scritto:

 

940 is today's buiild i think..

 

Ray

 

________________________________________

From: mailto:main@...o mailto:main@...o on behalf of Augusto mailto:hb9tza@...

Sent: 23 October 2017 17:17

To: mailto:main@...o

Subject: Re: [SDR-Radio] Preview 7 is Available

 

I tried to download the 64b /Ms version; does not run.

Downloaded and tried the 32 , installs OK, and runs a version 3 build 811 on an I5-6600 SSD Desktop with NVIDIA GTX1050 and 2 monitors; OS Windows 10pro,64 ; v.14393 .

Is the v3 build 811 the last one, freshly released?

Thanks.

                     Augusto HB9TZA

 





Re: Preview 7 is Available

Dick Grote
 

Besides having to tell Norton the download wasn't a problem, the 64 bit installation went very smoothly.  Looks very solid which doesn't surprise me in the least. 

Thanks,

Dick 
K6PBF


Re: Preview 7 is Available

Freeman Pascal
 

Must have been a false positive. Full scan shows no problem. Sorry for the false alarm.


-Freeman, N5FPP

On Mon, Oct 23, 2017 at 8:05 PM, Freeman Pascal <analias.nomdeguerre@...> wrote:
I'm not sure if this is a false positive, but I'm getting Windows Defender saying there is a virus in the 64bit installer downloaded using the Google link on the download page.

I'm doing a full scan now.


-Freeman, N5FPP

On Mon, Oct 23, 2017 at 3:51 PM, Augusto <hb9tza@...> wrote:
Thanks Simon G4ELI: issue resolved.
I have used the Tools and repaired all the Redistributables; reinstalled with the file
    SDR-Radio V3, 64-bit, 2017-06-16_2123.exe
The installed v811 runs perfectly and the radio are OK at autostart.
Tomorrow on the morning I'll try to download the last version and install it.
GN dear Friend, TU es 73,
                                                 Augusto I2JJR / HB9TZA 
(5R8JR)


Il 23/10/2017 22:19, Simon Brown ha scritto:

Hi,

 

I have no idea what has happened here. Please install the correct kit - 32-bit or 64-bit.

 

Also, see C++ Redistributables on http://www.sdr-radio.com/Support .

 

Simon Brown, G4ELI

 

http://www.dxgalaxy.com/

http://www.sdr-radio.com/

http://www.sdr-satellites.com

 

 

From: main@SDR-Radio.groups.io [mailto:main@....io] On Behalf Of Augusto

Sent: 23 October 2017 19:55

To: main@SDR-Radio.groups.io

Subject: Re: [SDR-Radio] Preview 7 is Available

 

Thanks.

I lost my old version, that was OK ; the new will not run: no radios found!

I disinstalòled it all, and then reinstalled it: now it want to reinstall a Visual C++ redistributable that's already there, and stops.Microsoft site seems to have that anymore ...

Now I have no SDR 3 installed at all ... Amen.

Will try again tomorrow, maybe.

GN, Augusto HB9TZA

Il 23/10/2017 19:27, Ray Lyford ha scritto:

 

940 is today's buiild i think..

 

Ray

 

________________________________________

From: mailto:main@...o mailto:main@...o on behalf of Augusto mailto:hb9tza@...

Sent: 23 October 2017 17:17

To: mailto:main@...o

Subject: Re: [SDR-Radio] Preview 7 is Available

 

I tried to download the 64b /Ms version; does not run.

Downloaded and tried the 32 , installs OK, and runs a version 3 build 811 on an I5-6600 SSD Desktop with NVIDIA GTX1050 and 2 monitors; OS Windows 10pro,64 ; v.14393 .

Is the v3 build 811 the last one, freshly released?

Thanks.

                     Augusto HB9TZA

 





Re: Preview 7 is Available

Freeman Pascal
 

I'm not sure if this is a false positive, but I'm getting Windows Defender saying there is a virus in the 64bit installer downloaded using the Google link on the download page.

I'm doing a full scan now.


-Freeman, N5FPP

On Mon, Oct 23, 2017 at 3:51 PM, Augusto <hb9tza@...> wrote:
Thanks Simon G4ELI: issue resolved.
I have used the Tools and repaired all the Redistributables; reinstalled with the file
    SDR-Radio V3, 64-bit, 2017-06-16_2123.exe
The installed v811 runs perfectly and the radio are OK at autostart.
Tomorrow on the morning I'll try to download the last version and install it.
GN dear Friend, TU es 73,
                                                 Augusto I2JJR / HB9TZA 
(5R8JR)


Il 23/10/2017 22:19, Simon Brown ha scritto:

Hi,

 

I have no idea what has happened here. Please install the correct kit - 32-bit or 64-bit.

 

Also, see C++ Redistributables on http://www.sdr-radio.com/Support .

 

Simon Brown, G4ELI

 

http://www.dxgalaxy.com/

http://www.sdr-radio.com/

http://www.sdr-satellites.com

 

 

From: main@SDR-Radio.groups.io [mailto:main@....io] On Behalf Of Augusto

Sent: 23 October 2017 19:55

To: main@SDR-Radio.groups.io

Subject: Re: [SDR-Radio] Preview 7 is Available

 

Thanks.

I lost my old version, that was OK ; the new will not run: no radios found!

I disinstalòled it all, and then reinstalled it: now it want to reinstall a Visual C++ redistributable that's already there, and stops.Microsoft site seems to have that anymore ...

Now I have no SDR 3 installed at all ... Amen.

Will try again tomorrow, maybe.

GN, Augusto HB9TZA

Il 23/10/2017 19:27, Ray Lyford ha scritto:

 

940 is today's buiild i think..

 

Ray

 

________________________________________

From: mailto:main@....io mailto:main@....io on behalf of Augusto mailto:hb9tza@...

Sent: 23 October 2017 17:17

To: mailto:main@....io

Subject: Re: [SDR-Radio] Preview 7 is Available

 

I tried to download the 64b /Ms version; does not run.

Downloaded and tried the 32 , installs OK, and runs a version 3 build 811 on an I5-6600 SSD Desktop with NVIDIA GTX1050 and 2 monitors; OS Windows 10pro,64 ; v.14393 .

Is the v3 build 811 the last one, freshly released?

Thanks.

                     Augusto HB9TZA

 




Re: New Website Goes Live

Mark J Culross
 

Simon:

On the new website, under the "Radios / RTL Dongles" section, in the "The Files" section, the [Link] for the assocated files is not yet active . . .

Thanks for the excellent software you provide for our use !!

Mark J Culross
KD5RXT



From: Simon Brown <simon@...>
To: main@SDR-Radio.groups.io
Sent: Monday, October 23, 2017 10:58 AM
Subject: [SDR-Radio] New Website Goes Live

Hi All,
 
The newly written www.sdr-radio.com has gone live, lots of text to be added as and when I have time.
 
Simon Brown, G4ELI
 
 
 



Re: Preview 7 is Available

Jack L. Metcalfe <jlmetcalfe@...>
 

Ken Alexander wrote:

I don't see any reference to Version 7 on the website?  Only Version 6.

73,

Ken
VE3HLS

---
Down the page, Ken:

http://www.sdr-radio.com/Software/Downloads

Jack Metcalfe
Stanford, KY





On 2017-10-23 11:57 AM, Simon Brown wrote:

Blimey,

 

Hadn’t finished doing the web page and you’ve seen it! If it blows up you know who to blame 😊 .

 

Simon Brown, G4ELI

 

www.dxgalaxy.com
www.sdr-radio.com
www.sdr-satellites.com

 

 

From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Mark Cayton
Sent: 23 October 2017 16:40
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Preview 7 is Available

 

For those not keeping up, Simon has posted his latest V3 preview on his website.

Thank you very much, Simon!

Mark  KF5VQY


Re: Bandwidth control not functional with new preview

Terry W6LEO
 

Just downloaded Oct. 23 preview. No problem here.

Terry
W6LEO

On Monday, October 23, 2017, 5:35:59 PM PDT, Mark Cayton <mcayton@...> wrote:


I just tried mine, I have the same radio as Hank's (RSP1), both methods of bandwidth selection (Select Radio window and Home Tab Bandwidth drop-down) working fine for me on Preview 7 Build 940.
--
Mark  KF5VQY


Re: Preview 7 is Available

Ken Alexander
 

I don't see any reference to Version 7 on the website?  Only Version 6.

73,

Ken
VE3HLS


On 2017-10-23 11:57 AM, Simon Brown wrote:

Blimey,

 

Hadn’t finished doing the web page and you’ve seen it! If it blows up you know who to blame 😊 .

 

Simon Brown, G4ELI

 

www.dxgalaxy.com
www.sdr-radio.com
www.sdr-satellites.com

 

 

From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Mark Cayton
Sent: 23 October 2017 16:40
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Preview 7 is Available

 

For those not keeping up, Simon has posted his latest V3 preview on his website.

Thank you very much, Simon!

Mark  KF5VQY



Re: Bandwidth control not functional with new preview

Mark Cayton <mcayton@...>
 

I just tried mine, I have the same radio as Hank's (RSP1), both methods of bandwidth selection (Select Radio window and Home Tab Bandwidth drop-down) working fine for me on Preview 7 Build 940.
--
Mark  KF5VQY


Re: Preview 7 is available

carl.physics
 

Loaded preview 7 64bit without a hitch.
I noticed your comment that IF might work, so I tried the IF out (9 mhz) of the ftdx5000. I was able to connect to the external radio using the add on scu17 dual uart and support software VSPE and Omnirig. Elad s2 was the sdr. The connection fired up as an external radio. I was able to click on the frequency readout and successfully scrolled the frequency. What didn't work was point and click on the spectrum/waterfall. The spectrum moved in strange ways and was essentially unusable. 
Looks like progress. Nice work Simon
Carl


Re: Bandwidth control not functional with new preview

Simon Brown
 

Hank,

Thanks - that info really helps.

Simon Brown, G4ELI

www.dxgalaxy.com
www.sdr-radio.com
www.sdr-satellites.com

-----Original Message-----
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Hank Tyler
Sent: 23 October 2017 22:32
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Bandwidth control not functional with new preview

I can do it (I just found out) from the Select Radio Window but not from the Home Tab Bandwidth drop down list. It says "dummy."
I am using the SDRPlay RSP1.

Hank/ke0cu


Re: Preview 7 is Available

Augusto <hb9tza@...>
 

Thanks Simon G4ELI: issue resolved.
I have used the Tools and repaired all the Redistributables; reinstalled with the file
    SDR-Radio V3, 64-bit, 2017-06-16_2123.exe
The installed v811 runs perfectly and the radio are OK at autostart.
Tomorrow on the morning I'll try to download the last version and install it.
GN dear Friend, TU es 73,
                                                 Augusto I2JJR / HB9TZA 
(5R8JR)


Il 23/10/2017 22:19, Simon Brown ha scritto:

Hi,

 

I have no idea what has happened here. Please install the correct kit - 32-bit or 64-bit.

 

Also, see C++ Redistributables on http://www.sdr-radio.com/Support .

 

Simon Brown, G4ELI

 

http://www.dxgalaxy.com/

http://www.sdr-radio.com/

http://www.sdr-satellites.com

 

 

From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Augusto

Sent: 23 October 2017 19:55

To: main@SDR-Radio.groups.io

Subject: Re: [SDR-Radio] Preview 7 is Available

 

Thanks.

I lost my old version, that was OK ; the new will not run: no radios found!

I disinstalòled it all, and then reinstalled it: now it want to reinstall a Visual C++ redistributable that's already there, and stops.Microsoft site seems to have that anymore ...

Now I have no SDR 3 installed at all ... Amen.

Will try again tomorrow, maybe.

GN, Augusto HB9TZA

Il 23/10/2017 19:27, Ray Lyford ha scritto:

 

940 is today's buiild i think..

 

Ray

 

________________________________________

From: mailto:main@SDR-Radio.groups.io mailto:main@SDR-Radio.groups.io on behalf of Augusto mailto:hb9tza@...

Sent: 23 October 2017 17:17

To: mailto:main@SDR-Radio.groups.io

Subject: Re: [SDR-Radio] Preview 7 is Available

 

I tried to download the 64b /Ms version; does not run.

Downloaded and tried the 32 , installs OK, and runs a version 3 build 811 on an I5-6600 SSD Desktop with NVIDIA GTX1050 and 2 monitors; OS Windows 10pro,64 ; v.14393 .

Is the v3 build 811 the last one, freshly released?

Thanks.

                     Augusto HB9TZA