|
Re: Independently adjustable upper and lower frequency bandwidth
Tony_AD0VC
I puzzled over the three phase schedule too. I decided that this was a way to let you make a periodic schedule that has "holes" in it without too much effort.
Tony ad0vc From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> on behalf of Ken Alexander <k.alexander@...>
Sent: Tuesday, November 28, 2017 11:12 AM To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Independently adjustable upper and lower frequency bandwidth Nothing else needs to be said once you have Bjarne's endorsement for a feature request...but I'll add my voice anyway. This is a valuable feature found in other high end software and is a boon
to MW DXers.
By the way, after bugging you for a decent recording scheduler, let me say how happy I am with the V3 scheduler! I'm not sure I understand the three-phase approach for creating schedules, but
it works very well and I can't think of anything to add.
Thanks and 73,
Ken Alexander
VE3HLS
From: Bjarne Mjelde <bjarne.mjelde@...> To: main@SDR-Radio.groups.io Sent: Tuesday, November 28, 2017 1:10 AM Subject: Re: [SDR-Radio] Independently adjustable upper and lower frequency bandwidth I agree with George, this would be a great tool for removing noise out of the passband, especially when DX-ing splits on MW.
From the world's northernmost DX-er
Bjarne Mjelde, Arctic Norway kongsfjord.no
arcticdx.blogspot.com
-- Bjarne Mjelde arcticdx.blogspot.com Remote rx: kongsdr.proxy.kiwisdr.com:8073/ |
|||||
|
|
|||||
|
Re: Independently adjustable upper and lower frequency bandwidth
Ken Alexander
Nothing else needs to be said once you have Bjarne's endorsement for a feature request...but I'll add my voice anyway. This is a valuable feature found in other high end software and is a boon to MW DXers. By the way, after bugging you for a decent recording scheduler, let me say how happy I am with the V3 scheduler! I'm not sure I understand the three-phase approach for creating schedules, but it works very well and I can't think of anything to add. Thanks and 73, Ken Alexander VE3HLS From: Bjarne Mjelde <bjarne.mjelde@...> To: main@SDR-Radio.groups.io Sent: Tuesday, November 28, 2017 1:10 AM Subject: Re: [SDR-Radio] Independently adjustable upper and lower frequency bandwidth I agree with George, this would be a great tool for removing noise out of the passband, especially when DX-ing splits on MW.
-- Bjarne Mjelde arcticdx.blogspot.com Remote rx: kongsdr.proxy.kiwisdr.com:8073/ |
|||||
|
|
|||||
|
Re: Fw: Problems with V3 console after 1709 W10 installation
Jim Smith G0OFE
Leif, So you're saying the Airspy HF+ is *better* than the Perseus, or are you saying the orderr (worse to better) is roughly:
then SDRPlay/Airspyplus Spyverter then Airspy HF+ then QS1R/Perseus/SDR-IP and presumably Elad S2
is in this group. ================================
Jim, Bournemouth, Dorset. IO90BR. Elad FDM-S2, Perseus/FM+, SDRPlay and Funcube Dongle SDR Recievers 8-element OP-DES for Band 2, 12-ele ZL Special for 2m, plus wideband vertical. Wellbrook 1530 Loop for LF On 28/11/2017 17:46, Leif Asbrink
wrote:
Hi Simon and All, The Airspy HF+ is in a different class compared to Perseus (and other high performance direct sampling receivers.) The HF+ is much better than the SDRplay or Airspy+Spyverter. The Perseus, (QS1R, Excalibur, SDR-IP and others) are an order of magnitude better while the rtl-sdr is an order of magnitude worse than the SDRplay or Airspy. These videos may shed some light:Well, There’s Nico’s good software. I suggest the Airspy HF+ as an alternative to the Perseus. Simon Brown, G4ELI <http://www.dxgalaxy.com/> www.dxgalaxy.com <http://www.sdr-radio.com/> www.sdr-radio.com <http://www.sdr-satellites.com> www.sdr-satellites.com From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of clement F59465 Sent: 27 November 2017 20:13 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Fw: Problems with V3 console after 1709 W10 installation Hi to all, Always the same problem.... misery the support of Perseus, shame on Microtelecom. I think to sell it .... F59465 Clement 2017-11-24 16:52 GMT+01:00 Simon Brown <simon@... <mailto:simon@...> >: Hi, All my information is here: http://www.sdr-radio.com/Radios/Perseus try different USB ports. Unless Nico releases new, working 64-bit drivers there is no solution. Simon Brown, G4ELI <http://www.dxgalaxy.com/> www.dxgalaxy.com <http://www.sdr-radio.com/> www.sdr-radio.com <http://www.sdr-satellites.com> www.sdr-satellites.com From: main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io> [mailto:main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io> ] On Behalf Of Giuseppe Lati via Groups.Io Sent: 24 November 2017 13:51 To: main@SDR-Radio.groups.io <mailto:main@SDR-Radio.groups.io> Subject: [SDR-Radio] Fw: Problems with V3 console after 1709 W10 installation Hi Simon, I am facing still the same problem wiyh my Perseus even after the last V3 version. It may be of help to you the logs made on my two PC, after the W10 1709 installation. I hope it may tell you something more the screen pitcure from my Hp-i5 and V2 on wich the selected radio is crossed after the attempt to start. Have in mind that the Perseus is working OK with HDSDR, SDRuno and the mother softw. Thanks again for your time. Giuseppe On Friday, November 17, 2017 4:43 PM, Giuseppe Lati <beppdigit@... <mailto:beppdigit@...> > wrote: Console V3 is no more working with my Perseus after the last W10 update . I tried many reboots but nothing. The Perseus is working fine with other softw. but V3 is even not starting: is this excluding any USB problem? Here attached there are three logs: two made with the latest V3 version and one from an earlear one. I hope Simon can have an answer for this problem. Anyway many thanks in advance to everyone can be of help to me. Giuseppe -- 73' Cordialement F59465 Clement My channel: F59465swl Youtube <http://www.youtube.com/F59465swl> |
|||||
|
|
|||||
|
Re: Fw: Problems with V3 console after 1709 W10 installation
Leif Asbrink
Hi Simon and All,
toggle quoted message
Show quoted text
The Airspy HF+ is in a different class compared to Perseus (and other high performance direct sampling receivers.) The HF+ is much better than the SDRplay or Airspy+Spyverter. The Perseus, (QS1R, Excalibur, SDR-IP and others) are an order of magnitude better while the rtl-sdr is an order of magnitude worse than the SDRplay or Airspy. These videos may shed some light: Well, |
|||||
|
|
|||||
|
Re: Fw: Problems with V3 console after 1709 W10 installation
Mauno_Ritola
Thank you, Meduzi! Mauno Meduzi Jellyfish kirjoitti 28.11.2017
klo 16:53:
On Mon, Nov 27, 2017 at 01:28 pm, Mauno_Ritola wrote: |
|||||
|
|
|||||
|
Re: Fw: Problems with V3 console after 1709 W10 installation
Meduzi Jellyfish
On Mon, Nov 27, 2017 at 01:28 pm, Mauno_Ritola wrote:
It would be great, if RSP1A works decently BOTH on FM and MW and could record such a wide bandwidth. And for that price.What you class as "decently" is more subjective that objective, though I can offer my subjective opinion in that the RSP1A hardware works great. It is better than an RSP1/2/Pro. I prefer however to use SDR-Console than SDRUno with it. |
|||||
|
|
|||||
|
Re: Fw: Problems with V3 console after 1709 W10 installation
Giuseppe Lati <beppdigit@...>
I need a replay to all of you intervened on this subject. After many attempts to get out of my problem I have found that, once again, this was due to the inappropriate replacement by the1709 W10 of some drivers in my PC: in this case it was of the USB board. After the replacement with the original ones (not so easy) everything returned to normal. Giuseppe On Monday, November 27, 2017 10:28 PM, Mauno_Ritola <Mauno.Ritola@...> wrote: Thanks, but I'd rather hear practical experiences. It would be
great, if RSP1A works decently BOTH on FM and MW and could record
such a wide bandwidth. And for that price.
Perseus (or a couple of them) will stay here at least for some
years, until the coming sunspot minimum is over ;-)
Best regards,
Mauno
Simon Brown kirjoitti 27.11.2017 klo
23:06:
Mauno,
Compare
the specs., then I’ll let you decide. Also see:
http://www.sdr-radio.com/Radios/Airspy/AirspyHF
From:
main@SDR-Radio.groups.io
[mailto:main@SDR-Radio.groups.io] On Behalf Of Mauno_Ritola
Sent: 27 November 2017 20:56 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Fw: Problems with V3 console after 1709 W10 installation Hi Simon,
Do you feel that HF+ is much better SDRPlay RSP1A?
Thanks,
Mauno Simon Brown kirjoitti 27.11.2017 klo
22:34:
|
|||||
|
|
|||||
|
Re: Independently adjustable upper and lower frequency bandwidth
Bjarne Mjelde
I agree with George, this would be a great tool for removing noise out of the passband, especially when DX-ing splits on MW.
-- Bjarne Mjelde arcticdx.blogspot.com Remote rx: kongsdr.proxy.kiwisdr.com:8073/ |
|||||
|
|
|||||
|
Re: LimeSDR DC Offset
Hi Vit, Thanks coming back to my reaction. Found these switches but in my case they did not give any result wrt the Lime returning spike problem. Another issue with this great piece of software is the fact that , after zooming in or out, you always come back to the spike-distorted Center Frequency. Maybe I’m just not clever enough to create somewhere in the program a fixed FRQ difference between Center and Local Oscillator that always keeps the reception FREQ away from the Spike. Any advice in this field will be highly appreciated. 73 Albert PD0OXW
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of ua9xja@...
Sent: 25 November 2017 07:36 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] LimeSDR DC Offset
Hi, Albert! Yes. DC correction switch you can find them in the "Radio Configuration > Options > DC Offset checkbox". Need restart radio. |
|||||
|
|
|||||
|
Re: Fw: Problems with V3 console after 1709 W10 installation
Mauno_Ritola
Thanks, but I'd rather hear practical experiences. It would be
great, if RSP1A works decently BOTH on FM and MW and could record
such a wide bandwidth. And for that price. Perseus (or a couple of them) will stay here at least for some years, until the coming sunspot minimum is over ;-) Best regards, Mauno Simon Brown kirjoitti 27.11.2017 klo
23:06:
|
|||||
|
|
|||||
|
Independently adjustable upper and lower frequency bandwidth
Here is a copy of a message from last June. Is it planned that this capability will be implemented? If so, when might this happen? The suggestion would be very helpful especially on medium wave to try to filter out neighboring frequencies. Thanks for any comments.
Thanks to the team for an excellent SDR program!
=========
From June:
I am using the current trial release of SDR Console 3.
I can adjust the bandwidth of the signal by dragging on either the right or left side of the current bandwidth boundaries. However this adjusts both sides by the same amount. Is there a way to adjust the left and right sides by different amounts? End of June message ======== Regards, George, NJ3H Redmond, Oregon USA |
|||||
|
|
|||||
|
Re: Fw: Problems with V3 console after 1709 W10 installation
Mauno,
Compare the specs., then I’ll let you decide. Also see: http://www.sdr-radio.com/Radios/Airspy/AirspyHF
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Mauno_Ritola
Sent: 27 November 2017 20:56 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Fw: Problems with V3 console after 1709 W10 installation
Hi Simon, Do you feel that HF+ is much better SDRPlay RSP1A? Thanks, Simon Brown kirjoitti 27.11.2017 klo 22:34:
|
|||||
|
|
|||||
|
Re: Fw: Problems with V3 console after 1709 W10 installation
Mauno_Ritola
Hi Simon, Do you feel that HF+ is much better SDRPlay RSP1A? Mauno Simon Brown kirjoitti 27.11.2017 klo
22:34:
|
|||||
|
|
|||||
|
Re: Fw: Problems with V3 console after 1709 W10 installation
Well,
There’s Nico’s good software. I suggest the Airspy HF+ as an alternative to the Perseus.
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of clement F59465
Hi to all, F59465 Clement
2017-11-24 16:52 GMT+01:00 Simon Brown <simon@...>:
|
|||||
|
|
|||||
|
Re: Fw: Problems with V3 console after 1709 W10 installation
Hi to all, F59465 ClementAlways the same problem.... misery the support of Perseus, shame on Microtelecom. I think to sell it .... 2017-11-24 16:52 GMT+01:00 Simon Brown <simon@...>:
--
|
|||||
|
|
|||||
|
Re: ICOM IC-7410 with RSP2 Pro and SDR Console V3 build 970
f5mwa
Hello, This is just to thank Simon for his nice software and to report on my setup. Im' using an ICOM IC-7410 and an SDRPlay RSP2 Pro as a second receiver (no IF output but a receiving antenna). The tx/rx is linked to V3 via Omnirig. I selected IC-7410v2 on
Omnirig and not TS-200. The baudrate is 19200 and the poll and
timeout are both 100ms. The tracking is perfect. Everything works
nicely. The only hick I've is with the Icom usb driver. It
stubbornly chooses the Codec Audio as a default when starting
the computer and I've to switch manually if I want the
audio output from the laptop loudspeakers. I'll have to install
a DAC to work with my external speakers....or buy usb speakers.
The laptop is a Dell XPS Core I5 2410M - 2.3 GHz with Windows 10 and only 4 GB of Memory. NVIDIA GeForce GT525M (I know its an old computer) Most of the time the CPU runs at aro 20% max. Again thanks to Simon. I've provided some more food for his dog. 73 to all Ezio M. Insinna -K3EK / F5MWA |
|||||
|
|
|||||
|
Re: Right / Left channel per receiver
Jim JG1KGS
Simon,
Just verified that the 11/24 kit fixed the issue! Thank you! 73, Jim JG1KGS |
|||||
|
|
|||||
|
Re: CQWW
Mark Cayton <mcayton@...>
Hi Max,
Very nice setup. I'm curious, what model lamps are those above your monitors? Thanks and 73, Mark KF5VQY |
|||||
|
|
|||||
|
Re: V3, Build 972 fault
Brendan Wahl
Okay, then I keep that PSU for the next PC I build!
USB PS, got it. I have tried a self-powered USB hub, but it seemingly made no difference in either signal issues or operation of the RSP2. This episode was a bit different, as Console V3 has never had any issues before with this setup, and this was a bit of a turn. Thanks all, Brendan |
|||||
|
|
|||||
|
Re: Hi I have a DVB-T+DAB+FM+SDR dongle no HF USB/LSB ham reception
Paul Goelz
At 04:43 PM 11/26/2017, you wrote:
Don't get your hopes up with using the dongle and an upconverter. Get something with a real front end and filters.That statement depends on your expectations. If all you can afford is a dongle and upconverter, don't let that stop you. And if you already have the dongle, just add the upconverter and you're on HF. In my experience, a garden variety $20 dongle and a $50 "Ham It Up" converter was a perfectly respectable combination for HF before I bought an RSP2. No, I would not recommend it if near a high power broadcast transmitter or if I had a neighbor ham that liked to work near the frequency I was receiving on. For that you need something with more than 8 bits of A/D. But for most purposes in the northern Detroit suburbs tuning the HF bands on a 20 / 17 / 10 fan dipole, my cheap dongle and upconverter worked fine..... quite a bit better than expected, actually. Paul Paul Goelz Rochester Hills, MI pgoelz@... www.pgoelz.com |
|||||
|
|
|||||
