|
Re: V3, Build 972 fault
Hi,
In this sort of situation, especially when you have to unplug/plug the device it’s most probably a USB power issue.
Simon Brown, G4ELI
www.dxgalaxy.com
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Brendan Wahl
Was scanning HF with a 6MHZ bandwidth looking for a new interference source when the waterfall stopped and my RSP2 stopped responding. Console did not completely crash, so I was able to generate a logfile. I was not able to restart the RSP2 without closing Console and pulling the USB cable briefly. |
|
|
|
Re: ANNOUNCE: NEW G3NRW IC-7300 RESOURCES PAGE
Hi Larry
toggle quoted message
Show quoted text
FB. I will add your entry to the Resources Page on the next update. Good luck. -- 73 Ian, G3NRW g3nrw@... ***** Editor: TS-590 Family Resources Page: http://g3nrw.net/TS-590 ***** Editor: IC-7300 Resources Page: http://g3nrw.net/IC-7300 On 25/11/2017 17:16, Larry Dighera wrote:
Hello Ian, |
|
|
|
V3, Build 972 fault
Brendan Wahl
Was scanning HF with a 6MHZ bandwidth looking for a new interference source when the waterfall stopped and my RSP2 stopped responding. Console did not completely crash, so I was able to generate a logfile. I was not able to restart the RSP2 without closing Console and pulling the USB cable briefly.
Works fine now, and I'll admit I may have caused it to fail. I was worried given my recent upgrades, but the PC and RSP2 are working great again. Brendan WA7HL |
|
|
|
Re: ANNOUNCE: NEW G3NRW IC-7300 RESOURCES PAGE
Hello Ian,
Please also consider listing TRX-Manager remote station software on your pages: http://www.trx-manager.com/ Thank you for your effort in supporting the IC-7300 owners and operators. Best regards, Larry WB6BBB On Thu, 23 Nov 2017 13:52:41 +0000, "Ian_Wade_G3NRW via Groups.Io" <g3nrw-radio@...> wrote: No problem Carl. I will add your site to the next update. |
|
|
|
Can't get a PPM Calibration of "+1.02" to display correctly
Mark Cayton <mcayton@...>
Simon,
I'm running an RSP1A, and in the PPM Calibration window I'm trying to input a value of +1.02 PPM, but can't get that value to display ... SDRC insists on displaying "+1.2" instead of "+1.02". I'm pretty sure the value of +1.02 is being correctly set internally, it's just being incorrectly displayed. I've been observing this for a long time, I just keep forgetting to mention it. Thanks and have a great weekend, -- Mark KF5VQY |
|
|
|
Re: No start: NVIDIA Windows Kernel Mode 353.06
Nils,
toggle quoted message
Show quoted text
Suggest you update the NVIDIA driver? Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com -----Original Message-----
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Nils Schiffhauer Sent: 25 November 2017 09:36 To: main@SDR-Radio.groups.io Subject: [SDR-Radio] No start: NVIDIA Windows Kernel Mode 353.06 Hi - running rusty Windows 8.1 on a Samsung laptop 700Z, I cannot start SDR Console V3. The screen flickers, and a message pops up regarding problems with "NVIDIA Windows Kernel Mode 353.06". Then the laptop boots again. No luck in starting V3. No problem with SDR-Consol V2, however. Anyone encountering the same? Thanks & 73: Nils -- 73 Nils, dk8ok.org |
|
|
|
No start: NVIDIA Windows Kernel Mode 353.06
Nils Schiffhauer
Hi - running rusty Windows 8.1 on a Samsung laptop 700Z, I cannot start SDR Console V3.
The screen flickers, and a message pops up regarding problems with "NVIDIA Windows Kernel Mode 353.06". Then the laptop boots again. No luck in starting V3. No problem with SDR-Consol V2, however. Anyone encountering the same? Thanks & 73: Nils -- 73 Nils, dk8ok.org |
|
|
|
Re: Kit: November 24th, 2017
Yea, thanks.
toggle quoted message
Show quoted text
Taking weekend off from Console UI, playing with NR ideas... Simon Brown, G4ELI www.dxgalaxy.com www.sdr-radio.com www.sdr-satellites.com -----Original Message-----
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Brendan Wahl Sent: 25 November 2017 02:50 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Kit: November 24th, 2017 Downloaded latest Build 972 (x64) today, and it's running very well with no hitches yet. Upgraded to Win10 r1709 from r1703 just yesterday, no major issues, thanks to the Gods of the Ether, Sky, and SSD's. Brendan WA7HL |
|
|
|
Re: LimeSDR DC Offset
ua9xja@...
Hi, Albert! Yes. DC correction switch you can find them in the "Radio Configuration > Options > DC Offset checkbox". Need restart radio.
73! Vit |
|
|
|
Re: Kit: November 24th, 2017
Brendan Wahl
Downloaded latest Build 972 (x64) today, and it's running very well with no hitches yet. Upgraded to Win10 r1709 from r1703 just yesterday, no major issues, thanks to the Gods of the Ether, Sky, and SSD's.
Brendan WA7HL |
|
|
|
Re: FW: [SDR-Radio] Kit: November 24th, 2017
Mark Cayton <mcayton@...>
RF Gain is fixed for RSP1A/RSP2, thank you very much Simon.
-- Mark KF5VQY |
|
|
|
Re: Kit: November 24th, 2017
Working great with my Elad S-1 and RSP-2 is working as it should
|
|
|
|
Re: LimeSDR DC Offset
Paul, UA9XJA,
With my Lime I always see a (known SDR IQ generated infamous) Spike on the Center Freq. No way to get this spike down (Simon once told me this a Lime issue ( I don’t have this e.g. with My SDRplay) and the only hands-on solution I found using the Satellite module (which is my main interest) is to create a frequency difference between the demodulation frequency and the Center Freq (where my Spike is) of the satellite I wish to track and Telemetry demodulate. This makes me keep away from the ugly Spike distortion.
For obvious reasons in many cases I prefer the SDRplay (also as filtering is/ turns out / seems better as with the wideband Lime.
I’m not sure if this is what you discuss . Plse comment. PS ref : DC correction is ON and conspicuous peak IF DC correction is OFF… Are these V3 buttons ?? If yes where can I find these ?
73 Albert PD0OXW
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Paul NN4F
Sent: 25 November 2017 00:23 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] LimeSDR DC Offset
I found the same, adjusting the gain is about the best you can get, change per bands etc until it levels out, and always tune off the center so to avoid and distortion from the correction algorithm, same if most software for DC, same on my Lime, SDRPlays and RTL's
Paul
On Fri, Nov 24, 2017 at 2:16 PM, <ua9xja@...> wrote: Hi!
|
|
|
|
Re: LimeSDR DC Offset
Paul NN4F
I found the same, adjusting the gain is about the best you can get, change per bands etc until it levels out, and always tune off the center so to avoid and distortion from the correction algorithm, same if most software for DC, same on my Lime, SDRPlays and RTL's Paul On Fri, Nov 24, 2017 at 2:16 PM, <ua9xja@...> wrote: Hi! |
|
|
|
LimeSDR DC Offset
ua9xja@...
Hi!
My LimeSDR has black hole in the center of the scale if DC correction is ON and conspicuous peak IF DC correction is OFF. Can i fine tune the DC Offset and save this to "ini" file for best result? 145.5 MHz for example 73! Vit. RT6M |
|
|
|
Re: Lime sdr not working with version SDR-Radio V3, 64-bit, 2017-11-24_0733
Hi,
Changed to use latest github code with Lime Mini support, but the github code has the normal LimeSDR support removed ☹ .
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Siegfried Jackstien
Sent: 24 November 2017 20:49 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] Lime sdr not working with version SDR-Radio V3, 64-bit, 2017-11-24_0733
here same thing (does not work) why did lime suite dll and sdrsourcelime dll change??? dg9bfc sigi
Am 24.11.2017 um 18:48 schrieb Simon Brown:
|
|
|
|
Re: Lime sdr not working with version SDR-Radio V3, 64-bit, 2017-11-24_0733
Siegfried Jackstien
here same thing (does not work) why did lime suite dll and sdrsourcelime dll change??? dg9bfc sigi
Am 24.11.2017 um 18:48 schrieb Simon
Brown:
|
|
|
|
Re: HackRF Tuning Backwards
#hackrf
Nope,
It’s OK, so invert spectrum is the only possibility.
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Simon Brown
Sent: 24 November 2017 20:34 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] HackRF Tuning Backwards #hackrf
Ah,
Let me check.
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Siegfried Jackstien
i and q signals mixed??
Am 24.11.2017 um 19:42 schrieb James Brown:
|
|
|
|
Re: HackRF Tuning Backwards
#hackrf
toggle quoted message
Show quoted text
From: main@SDR-Radio.groups.io [mailto:main@SDR-Radio.groups.io] On Behalf Of Siegfried Jackstien
Sent: 24 November 2017 20:30 To: main@SDR-Radio.groups.io Subject: Re: [SDR-Radio] HackRF Tuning Backwards #hackrf
i and q signals mixed??
Am 24.11.2017 um 19:42 schrieb James Brown:
|
|
|
|
Re: HackRF Tuning Backwards
#hackrf
Siegfried Jackstien
i and q signals mixed?? Am 24.11.2017 um 19:42 schrieb James
Brown:
|
|
|