Date   

Re: Explanation Please - Satellite Passes

Hasan Schiers N0AN
 

If two conditions are met:

1. Automatic Schedule is OFF

2. You double click on the pass list , then the frequency should change to match the satellite you have selected.

2nd Question:

It does match, just a different view based on scale.. Both show AO-7 in the same location, just a different perspective due to zoom level.

73, N0AN
Hasan


On Sat, Nov 6, 2021 at 5:33 PM George Stein - NJ3H via groups.io <nj3h=yahoo.com@groups.io> wrote:
Another Question Area 1:

I was under the impression that when one clicks on a satellite push button, that the frequency of the radio would change and SDRC would show that frequency/  I don't see that happening.  How do I implement that feature?

Then. what is the method to get the radio to start changing frequency (Doppler shift being applied as the satellite goes over my area?

Another Question Area 2:

See the attached picture.  Why doesn't the popup and the main map's footprint cover the same area?  Why don't the times match?

What I guess I need is a video or more detailed instructions on how the satellite portion of SDRC works.  It looks liker there is wonderful capability here. I just need some help getting it figured out.  So far I haven't found a video that has been of any help to me.


Thanks,
George


Re: Malahit DSP and DSP2

David J Taylor
 

On 06/11/2021 20:29, Simon Brown wrote:
Hi Mike,
Thanks – I’ll not bother now, I’ll wait until the device is actually available then make a decision. Haven’t looked at the crash dump, maybe tomorrow. Been chasing my tail all day.
Simon Brown, G4ELI
https://www.sdr-radio.com <https://www.sdr-radio.com/>
A number of us already have the device.
Is there any way we could help?

David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Re: Malahit DSP and DSP2

N2MS
 

Simon,

Fine. It looks like the Malahit is another victim of the supply chain mess.

Mike N2M

On 11/06/2021 4:29 PM Simon Brown <simon@...> wrote:


Hi Mike,

 

Thanks – I’ll not bother now, I’ll wait until the device is actually available then make a decision. Haven’t looked at the crash dump, maybe tomorrow. Been chasing my tail all day.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 06 November 2021 15:43
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Malahit DSP and DSP2


Simon,


I contacted Georgiy RX9CIM, the lead developer for the Malahit, via Telegram and asked for an API or documentation. He replied the CAT is fully compatible with the TS590 and the IQ output is like an audio cable, virtual.


If you want to contact him his email address is rx9cim@... 


He prefers that you contact him via Telegram or Skype because he does not frequently check his email.


It sounds like the IQ output is similar to the USD IQ output for the IC-7300 which is just the audio baseband.


You haven't heard much from me this summer because I spend most of my time outdoors and operate or listen with various portable sets. When the weather gets cold I listen mostly indoors and like to control the radios with SDRC.


By the way, have you been able to look at the crashes produced when operating with my Afedri LAN-IQ SDR?


As always, I appreciate your work.


73 Mike N2MS

On 11/06/2021 3:08 AM Simon Brown <simon@...> wrote:



OK,


Then I need the API / programming document. I don’t see this on the website. The radios are not in stock I think?


Simon Brown, G4ELI

https://www.sdr-radio.com


From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 06 November 2021 01:16
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Malahit DSP and DSP2


Simon.


It does have an IQ output. Here a the blog entry discussing control via SDRUno



Mike N2MS

On 11/05/2021 4:07 PM Simon Brown <simon@...> wrote:



Mike,


I would consider it is there’s an IQ interface.


Simon Brown, G4ELI

https://www.sdr-radio.com


From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 05 November 2021 16:43
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Malahit DSP and DSP2


Simon,

I do lots of outdoor listening when the weather cooperates and have stared using portable SDR receivers with the touch screen displays.

You support the Afedri LAN-IQ SDR and have started to support the new Arinst SDR Dreamkit V1D.

Would you consider supporting the Malahit DSP and DSP2?

<https://malahiteam.com/>

Thanks,

Mike N2MS



--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.



--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.



--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Malahit DSP and DSP2

Zacharias Liangas
 


Re: Explanation Please - Satellite Passes

George Stein - NJ3H
 

Another Question Area 1:

I was under the impression that when one clicks on a satellite push button, that the frequency of the radio would change and SDRC would show that frequency/  I don't see that happening.  How do I implement that feature?

Then. what is the method to get the radio to start changing frequency (Doppler shift being applied as the satellite goes over my area?

Another Question Area 2:

See the attached picture.  Why doesn't the popup and the main map's footprint cover the same area?  Why don't the times match?

What I guess I need is a video or more detailed instructions on how the satellite portion of SDRC works.  It looks liker there is wonderful capability here. I just need some help getting it figured out.  So far I haven't found a video that has been of any help to me.


Thanks,
George


Re: Malahit DSP and DSP2

Simon Brown
 

Hi Mike,

 

Thanks – I’ll not bother now, I’ll wait until the device is actually available then make a decision. Haven’t looked at the crash dump, maybe tomorrow. Been chasing my tail all day.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 06 November 2021 15:43
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Malahit DSP and DSP2

 

Simon,

 

I contacted Georgiy RX9CIM, the lead developer for the Malahit, via Telegram and asked for an API or documentation. He replied the CAT is fully compatible with the TS590 and the IQ output is like an audio cable, virtual.

 

If you want to contact him his email address is rx9cim@... 

 

He prefers that you contact him via Telegram or Skype because he does not frequently check his email.

 

It sounds like the IQ output is similar to the USD IQ output for the IC-7300 which is just the audio baseband.

 

You haven't heard much from me this summer because I spend most of my time outdoors and operate or listen with various portable sets. When the weather gets cold I listen mostly indoors and like to control the radios with SDRC.

 

By the way, have you been able to look at the crashes produced when operating with my Afedri LAN-IQ SDR?

 

As always, I appreciate your work.

 

73 Mike N2MS

On 11/06/2021 3:08 AM Simon Brown <simon@...> wrote:

 

 

OK,

 

Then I need the API / programming document. I don’t see this on the website. The radios are not in stock I think?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 06 November 2021 01:16
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Malahit DSP and DSP2

 

Simon.

 

It does have an IQ output. Here a the blog entry discussing control via SDRUno

 

 

Mike N2MS

On 11/05/2021 4:07 PM Simon Brown <simon@...> wrote:

 

 

Mike,

 

I would consider it is there’s an IQ interface.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 05 November 2021 16:43
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Malahit DSP and DSP2

 

Simon,

I do lots of outdoor listening when the weather cooperates and have stared using portable SDR receivers with the touch screen displays.

You support the Afedri LAN-IQ SDR and have started to support the new Arinst SDR Dreamkit V1D.

Would you consider supporting the Malahit DSP and DSP2?

<https://malahiteam.com/>

Thanks,

Mike N2MS

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Malahit DSP and DSP2

N2MS
 

Simon,

I contacted Georgiy RX9CIM, the lead developer for the Malahit, via Telegram and asked for an API or documentation. He replied the CAT is fully compatible with the TS590 and the IQ output is like an audio cable, virtual.

If you want to contact him his email address is rx9cim@... 

He prefers that you contact him via Telegram or Skype because he does not frequently check his email.

It sounds like the IQ output is similar to the USD IQ output for the IC-7300 which is just the audio baseband.

You haven't heard much from me this summer because I spend most of my time outdoors and operate or listen with various portable sets. When the weather gets cold I listen mostly indoors and like to control the radios with SDRC.

By the way, have you been able to look at the crashes produced when operating with my Afedri LAN-IQ SDR?

As always, I appreciate your work.

73 Mike N2MS

On 11/06/2021 3:08 AM Simon Brown <simon@...> wrote:


OK,

 

Then I need the API / programming document. I don’t see this on the website. The radios are not in stock I think?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 06 November 2021 01:16
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Malahit DSP and DSP2


Simon.


It does have an IQ output. Here a the blog entry discussing control via SDRUno



Mike N2MS

On 11/05/2021 4:07 PM Simon Brown <simon@...> wrote:



Mike,


I would consider it is there’s an IQ interface.


Simon Brown, G4ELI

https://www.sdr-radio.com


From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 05 November 2021 16:43
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Malahit DSP and DSP2


Simon,

I do lots of outdoor listening when the weather cooperates and have stared using portable SDR receivers with the touch screen displays.

You support the Afedri LAN-IQ SDR and have started to support the new Arinst SDR Dreamkit V1D.

Would you consider supporting the Malahit DSP and DSP2?

<https://malahiteam.com/>

Thanks,

Mike N2MS



--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.



--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Malahit DSP and DSP2

Matthias Bopp
 

Hi Sigi,

 

I am afraid I cannot (yet) recommend it. The reason is simply that I have not tested it enough.

 

I have upgraded the software which extends the frequency range to 2 GHz and also has improved its performance significantly.

The free firmware is very limited.

 

I am planning to use the Malachite mainly as “IF” receiver, e.g. for the 740 MHz IF of my QO-100 setup but also as the IF receiver

of my 122 GHz transceiver which is in work.

 

Once I had more time to test it on air I will give you a fair assessment / possibly a recommendation to buy.

 

Kind regards

 

Matthias

 

www.dd1us.de

 

 

Von: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Im Auftrag von Siegfried Jackstien via groups.io
Gesendet: Samstag, 6. November 2021 10:13
An: main@SDR-Radio.groups.io
Betreff: Re: [SDR-Radio] Malahit DSP and DSP2

 

Hi Matt,

how well does it work? Would you recommend it??

Greetings from northern DL

73 de DG9BFC Sigi

Am 06.11.2021 um 09:48 schrieb Matthias Bopp:

Hi Simon,

 

I am not sure whether they are on stock but I know many hams who already bought one.

 

I have one too and will be happy to beta-test SDR-Console with it.

 

Kind regards

 

Matthias

 

www.dd1us.de

 

 

Von: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Im Auftrag von Simon Brown via groups.io
Gesendet: Samstag, 6. November 2021 08:08
An: main@SDR-Radio.groups.io
Betreff: Re: [SDR-Radio] Malahit DSP and DSP2

 

OK,

 

Then I need the API / programming document. I don’t see this on the website. The radios are not in stock I think?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 06 November 2021 01:16
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Malahit DSP and DSP2

 

Simon.

 

It does have an IQ output. Here a the blog entry discussing control via SDRUno

 

 

Mike N2MS

On 11/05/2021 4:07 PM Simon Brown <simon@...> wrote:

 

 

Mike,

 

I would consider it is there’s an IQ interface.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 05 November 2021 16:43
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Malahit DSP and DSP2

 

Simon,

I do lots of outdoor listening when the weather cooperates and have stared using portable SDR receivers with the touch screen displays.

You support the Afedri LAN-IQ SDR and have started to support the new Arinst SDR Dreamkit V1D.

Would you consider supporting the Malahit DSP and DSP2?

<https://malahiteam.com/>

Thanks,

Mike N2MS

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Malahit DSP and DSP2

Tracey Gardner
 

 
There is a pre-order system for the Malahit DSP2 receiver and a waiting list of some 8-10 weeks.
 
 
Georgiy RX9CIM seems to be the lead player in the trio of developers
His email address is as follows
 
 
73s Tracey G5VU
 

----- Original Message -----
From: Simon Brown <simon@...>
Reply-To: <main@SDR-Radio.groups.io>
To: <main@SDR-Radio.groups.io>
Sent: 06/11/2021 07:08:24
Subject: Re: [SDR-Radio] Malahit DSP and DSP2

OK,

 

Then I need the API / programming document. I don’t see this on the website. The radios are not in stock I think?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 06 November 2021 01:16
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Malahit DSP and DSP2

 

Simon.

 

It does have an IQ output. Here a the blog entry discussing control via SDRUno

 

 

Mike N2MS

On 11/05/2021 4:07 PM Simon Brown <simon@...> wrote:

 

 

Mike,

 

I would consider it is there’s an IQ interface.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 05 November 2021 16:43
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Malahit DSP and DSP2

 

Simon,

I do lots of outdoor listening when the weather cooperates and have stared using portable SDR receivers with the touch screen displays.

You support the Afedri LAN-IQ SDR and have started to support the new Arinst SDR Dreamkit V1D.

Would you consider supporting the Malahit DSP and DSP2?

<https://malahiteam.com/>

Thanks,

Mike N2MS

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Instances

Kriss Kliegle KA1GJU
 

Bob,
You can run another copy (Instance (A UK word?)) of SDRC side by side. Simply click and drag the application off to the middle of either left or right hand side. Then open another' instance', once it boots up you can click and drag it to the opposite side. Now you have two copies running side by side. Works great for monitoring QRM locally and then probing other servers to see if they hear the same thing. Or if you want to side by side comparison of two antennas at your home, you will need two (preferably) of the same SDR's. As for the 'Identities', I have never dabbled with them... so I can't answer that one!

Here's an example of running two instances side by side:



Left hand image is the end fed wire (omni directional) and the right hand side is a beam pointing south. Really not much difference in signal strength, so the digital signal is probably east or west of my location.


Does that help?

73 Kriss KA1GJU


Instances

rmrrgs <rgsrose@...>
 

Hello,

Is there a link to an explanation of what and how to utilize "Instances" ?

And, how it ties in with "Identities" ?

I realize I don't have a good understanding of.  Or, perhaps just a basic explanation of would do it.

   (should this have been posted in the other Forum ? Never sure which to use)

Much thanks, as always,
Bob


Re: Malahit DSP and DSP2

Siegfried Jackstien
 

Hi Matt,

how well does it work? Would you recommend it??

Greetings from northern DL

73 de DG9BFC Sigi

Am 06.11.2021 um 09:48 schrieb Matthias Bopp:

Hi Simon,

 

I am not sure whether they are on stock but I know many hams who already bought one.

 

I have one too and will be happy to beta-test SDR-Console with it.

 

Kind regards

 

Matthias

 

www.dd1us.de

 

 

Von: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Im Auftrag von Simon Brown via groups.io
Gesendet: Samstag, 6. November 2021 08:08
An: main@SDR-Radio.groups.io
Betreff: Re: [SDR-Radio] Malahit DSP and DSP2

 

OK,

 

Then I need the API / programming document. I don’t see this on the website. The radios are not in stock I think?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 06 November 2021 01:16
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Malahit DSP and DSP2

 

Simon.

 

It does have an IQ output. Here a the blog entry discussing control via SDRUno

 

 

Mike N2MS

On 11/05/2021 4:07 PM Simon Brown <simon@...> wrote:

 

 

Mike,

 

I would consider it is there’s an IQ interface.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 05 November 2021 16:43
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Malahit DSP and DSP2

 

Simon,

I do lots of outdoor listening when the weather cooperates and have stared using portable SDR receivers with the touch screen displays.

You support the Afedri LAN-IQ SDR and have started to support the new Arinst SDR Dreamkit V1D.

Would you consider supporting the Malahit DSP and DSP2?

<https://malahiteam.com/>

Thanks,

Mike N2MS

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Malahit DSP and DSP2

Matthias Bopp
 

Hi Simon,

 

I am not sure whether they are on stock but I know many hams who already bought one.

 

I have one too and will be happy to beta-test SDR-Console with it.

 

Kind regards

 

Matthias

 

www.dd1us.de

 

 

Von: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> Im Auftrag von Simon Brown via groups.io
Gesendet: Samstag, 6. November 2021 08:08
An: main@SDR-Radio.groups.io
Betreff: Re: [SDR-Radio] Malahit DSP and DSP2

 

OK,

 

Then I need the API / programming document. I don’t see this on the website. The radios are not in stock I think?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 06 November 2021 01:16
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Malahit DSP and DSP2

 

Simon.

 

It does have an IQ output. Here a the blog entry discussing control via SDRUno

 

 

Mike N2MS

On 11/05/2021 4:07 PM Simon Brown <simon@...> wrote:

 

 

Mike,

 

I would consider it is there’s an IQ interface.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 05 November 2021 16:43
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Malahit DSP and DSP2

 

Simon,

I do lots of outdoor listening when the weather cooperates and have stared using portable SDR receivers with the touch screen displays.

You support the Afedri LAN-IQ SDR and have started to support the new Arinst SDR Dreamkit V1D.

Would you consider supporting the Malahit DSP and DSP2?

<https://malahiteam.com/>

Thanks,

Mike N2MS

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: SDR Console with Airspy R2

Simon Brown
 

This looks OK to me although I use the dBm scale for broadcast rather than S units.

 

Ribbon Bar, View, Spectrum, Scale.

 

Also adjust High and Low a bit…

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of George Stein - NJ3H via groups.io
Sent: 05 November 2021 22:29
To: main@sdr-radio.groups.io
Subject: Re: [SDR-Radio] SDR Console with Airspy R2

 

Hi Simon,

thanks for your reply (and for the one about satellite height as well)

 

Hopefully the attached picture will help.

 

All the best!

 

Regards,

George, NJ3H

Redmond, Oregon USA

 

 

 

 

On Friday, November 5, 2021, 12:51:42 AM PDT, Simon Brown <simon@...> wrote:

 

 

George,

 

  1. Adjust the contrast (RHS), just click [Auto], this will help a lot, then post a screenshot.
  2. Adjust the range with the Low and High options which are shown when the mouse is moved over the spectrum / waterfall.
  3. You seem to have a lot of gain which I can’t explain – the Liner gain setting of 10 is good. It may be noise, the new screenshot will help.
  4. SDR# shows relative to full scale, a different concept.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of George Stein - NJ3H via groups.io
Sent: 04 November 2021 22:39
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] SDR Console with Airspy R2

 

Hi JoAnne,

Thanks for your reply.  The new SDRC picture is at 10 MHz bandwidth.  The new SDR# is at 8 MHz bandwith.  The audio has a lot of hiss in it using SDRC, while SDR# is crystal clear.

Yes I am using the same antenna.

So I am looking for the gain control in SDRC?  I just haven't found it yet.


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Malahit DSP and DSP2

Simon Brown
 

OK,

 

Then I need the API / programming document. I don’t see this on the website. The radios are not in stock I think?

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 06 November 2021 01:16
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] Malahit DSP and DSP2

 

Simon.

 

It does have an IQ output. Here a the blog entry discussing control via SDRUno

 

 

Mike N2MS

On 11/05/2021 4:07 PM Simon Brown <simon@...> wrote:

 

 

Mike,

 

I would consider it is there’s an IQ interface.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 05 November 2021 16:43
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Malahit DSP and DSP2

 

Simon,

I do lots of outdoor listening when the weather cooperates and have stared using portable SDR receivers with the touch screen displays.

You support the Afedri LAN-IQ SDR and have started to support the new Arinst SDR Dreamkit V1D.

Would you consider supporting the Malahit DSP and DSP2?

<https://malahiteam.com/>

Thanks,

Mike N2MS

 


--

- + - + -

Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Malahit DSP and DSP2

N2MS
 

Simon.

It does have an IQ output. Here a the blog entry discussing control via SDRUno


Mike N2MS

On 11/05/2021 4:07 PM Simon Brown <simon@...> wrote:


Mike,

 

I would consider it is there’s an IQ interface.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 05 November 2021 16:43
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Malahit DSP and DSP2


Simon,

I do lots of outdoor listening when the weather cooperates and have stared using portable SDR receivers with the touch screen displays.

You support the Afedri LAN-IQ SDR and have started to support the new Arinst SDR Dreamkit V1D.

Would you consider supporting the Malahit DSP and DSP2?

<https://malahiteam.com/>

Thanks,

Mike N2MS



--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Explanation Please - Satellite Passes

George Stein - NJ3H
 

Greetings,

Looking at NOAA 18.  The large map information agrees with Orbitron, so two programs agreeing is great!.

However the popup map, doesn't agree with the main map.  The AOS values are different between the two maps,  So I am obviously not understanding the purpose of the popup map.  Please clarify.

Is there a way to show more passes (say the current plus the next 2) on the main map?

Also, I would love to see along side the AOS at the top of the main map, the LOS as well. Then visually one has both important times clearly visible.  I presume AOS is calculated based on crossing the horizon and not some set minimum elevation.

Thanks very much.

Regards,
George


Re: SDR Console with Airspy R2

George Stein - NJ3H
 

Hi Simon,
thanks for your reply (and for the one about satellite height as well)

Hopefully the attached picture will help.

All the best!

Regards,
George, NJ3H
Redmond, Oregon USA





On Friday, November 5, 2021, 12:51:42 AM PDT, Simon Brown <simon@...> wrote:


George,

 

  1. Adjust the contrast (RHS), just click [Auto], this will help a lot, then post a screenshot.
  2. Adjust the range with the Low and High options which are shown when the mouse is moved over the spectrum / waterfall.
  3. You seem to have a lot of gain which I can’t explain – the Liner gain setting of 10 is good. It may be noise, the new screenshot will help.
  4. SDR# shows relative to full scale, a different concept.

 

Simon Brown, G4ELI

https://www.sdr-radio.com

 

From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of George Stein - NJ3H via groups.io
Sent: 04 November 2021 22:39
To: main@SDR-Radio.groups.io
Subject: Re: [SDR-Radio] SDR Console with Airspy R2

 

Hi JoAnne,

Thanks for your reply.  The new SDRC picture is at 10 MHz bandwidth.  The new SDR# is at 8 MHz bandwith.  The audio has a lot of hiss in it using SDRC, while SDR# is crystal clear.

Yes I am using the same antenna.

So I am looking for the gain control in SDRC?  I just haven't found it yet.


--
- + - + -
Please use https://forum.sdr-radio.com:4499/ when posting questions or problems.


Re: Malahit DSP and DSP2

BobS
 

The Malachit supports a very small subset of the Kenwood TS-480 command set. It supports reading the frequency and mode and setting only the frequency. It's severely limited in its scope.

On the positive side, it's really quick to add CAT support!

Bob W4RLS


Re: Malahit DSP and DSP2

Larry Dighera
 

I believe the Malahit supports a subset of the Kenwood CAT protocol through
soapy library.

Tuesday Oct 26, Malahiteam released their manuals in English for the
original DSP1 and the DSP2:
https://drive.google.com/drive/u/1/folders/1WiQdee4R8XBenx-E7PT3dPy4iDjbu0fR



From: main@SDR-Radio.groups.io <main@SDR-Radio.groups.io> On Behalf Of N2MS
Sent: 05 November 2021 16:43
To: main@SDR-Radio.groups.io
Subject: [SDR-Radio] Malahit DSP and DSP2

Simon,

I do lots of outdoor listening when the weather cooperates and have stared using portable SDR receivers with the touch screen displays.

You support the Afedri LAN-IQ SDR and have started to support the new Arinst SDR Dreamkit V1D.

Would you consider supporting the Malahit DSP and DSP2?

<https://malahiteam.com/>

Thanks,

Mike N2MS



On Fri, 5 Nov 2021 20:07:04 -0000, "Simon Brown" <simon@...> wrote:

Mike,

I would consider it is there’s an IQ interface.

Simon Brown, G4ELI

<https://www.sdr-radio.com/> https://www.sdr-radio.com
Best regards,

Larry
WB6BBB

3081 - 3100 of 67473